|
|
Home -> Anchor & Docking -> Fenders & Docking->Dock Pro™ Vinyl Dock Edging
Prevent scuffing when you dock Vinyl dock guard is specially formulated for softness and durability to protect your boat or dinghy. Each piece installs easily with screws or nails to the edge of docks, piers and floats. Material: Extruded PVC . Attachment Method: Stainless steel dock nails . Shock Absorption Mechanism: Flexible PVC .
Part No: 46098
|
|
|
|
Home -> Cabinet & Deck Hardware -> Deck Plates & Storage
Increase your available storage area and save space at the same time. This recessed storage locker uses a continuous stainless steel hinge on the access door for long-lasting strength. Made of weather-able, acrylic capped ABS plastic for superior gloss, color retention and UV protection. Measures 11 3/4"H x 19 3/4"W x 7 1/4"D.
Part No: 46101500
|
|
|
|
Home -> Sailboat -> Running Rigging By The Foot->MFP (Multi-Filament Polypropylene) Floatine
Multi-filament Polypropylene Floating Line 2-in-1 braid with a multi-filament polypropylene cover and floating core. Yellow with red ID. A versatile, general purpose line that floats. Soft hand feels like a Dacron double braid. Accepts knots well; doesn't slip. Perfect for dinghy painters. Polypropylene double braid . Floats . Highly visible . Makes great stern tie lines⁄tow lines . Easy knot tying .
Part No: 461024106020
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Bilge Pump Parts->Tsunami Bilge Pump Cartridge Replacements
Interchageable, twist-and-lock cartridges reduce maintenance time and even enable an angler to switch cartridges between an aerator and bilge pump. The rugged glass and mineral-filled polymer construction resists chemicals, fuel and detergents.
Part No: 4622-6
|
|
|
|
Home -> Engine Systems -> Engine Parts->NGK Spark Plugs
NGK spark plugs are designed to operate over a much wider heat range than ordinary plugs. Each NGK features high alumina ceramics for better heat transfer and electrical insulation. Patented triple gasket sealing process eliminates the possibility of combustion gas leakage.
Part No: 4623
|
|
|
|
Recessed fuse contacts, no cover required. Black thermoplastic.
Part No: 46379-10-BP
|
|
|
|
Home -> Engine Systems -> Engine Parts->Noise Control Barrier Material
The 3/32" flexible vinyl sheet is fused between two layers of foam—an exterior (“decoupler”) layer and an interior (“absorber”) layer. The exterior layer is then covered with a thin film (2. 5 mil) of mylar, reinforced with elastomer-coated fiberglass, for surface heat protection and enhanced sound absorption. The overall effect is a dramatic noise reduction when compared with single-layer foam barriers. Available in two overall thicknesses. Peel and stick backing for easy installation.
Part No: 48128
|
|
|
|
|
Home -> Engine Systems -> Engine Parts->NGK Spark Plugs
NGK spark plugs are designed to operate over a much wider heat range than ordinary plugs. Each NGK features high alumina ceramics for better heat transfer and electrical insulation. Patented triple gasket sealing process eliminates the possibility of combustion gas leakage.
Part No: 4838
|
|
|
|
The fast and easy way to change your oil With a sealed switch and splash-proof "Shurcote II" seamless motor shell, this pump thrives in wet environments, such as continuous-duty live well (tanks under 35 gallons) or wash down applications. It features a run-dry capability and is designed to not overheat with extended use. Switch Type: Sealed 45 psi pressure switch . Material: Glass-reinforced nylon body and base-plate . Port Sizes: 1/2" NPS male . Dimensions: 5. 4"H x 5.
Part No: 4901-6212
|
|
|
|
Home -> Cordage -> Rigging Products->Spreader Bar Trapeze Harness
Worn by many top sailors around the world, the spreader bar on this harness positions the weight over the hips, reducing painful pressure points and increasing comfort during long periods in the harness. Features the RWO “QRH” pushbutton Quick Release Hook for safer trapezing. Includes multiple adjustment points and a padded lumbar support.
Part No: 4901GCM
|
|
|
|
Home -> Sailboat -> Winches -> Self-Tailing Winches->ELS & E-Series Electric Self-Tailing Winches & Conversion Kits
Electric winches operate at the touch of a button and provide a full manual two-speed override when you want it. The ELS Series use a solid-state control box that runs the winch at high speed and slows it down as the load increases. Quiet running and easy to install, these winches provide efficient operation and are suitable for genoa sheets on boats 30'–36', and for main halyards on boats 40'–46'. Both series include the winch, drive unit, motor, deck switch, control box and circuit breaker.
Part No: 490402563
|
|
|
|
Home -> Plumbing -> Marine Sanitation->Head Treatment, Odorlos
A nitrate compound, speeds up the natural waste breakdown process which prevents odors by feeding the bacteria a preferred energy source so no foul hydrogen sulfide odors will appear and prevents clogging. This concentrated chemistry is so efficient for odor control that no harsh perfumes or staining colors are needed. Used by waste water treatment plants world wide. It is very concentrated—a 4oz. container will treat 40 gallons. It also helps to lubricate valves.
Part No: 493-0
|
|
|
|
Home -> Cabinet & Deck Hardware -> Deck Plates & Storage
Strong, UV-resistant ABS. Flanges are pre-drilled for #8 FHMS. Cut-out template included.
Part No: 49400000
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Chain->Mooring Chain
Long-link mooring chain accepts a shackle anywhere A low-carbon steel, general-purpose chain with a versatile, flexible long-link design for placing shackles anywhere along its length. Hot dip galvanized for outstanding corrosion protection.
Part No: 5001-40650
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Grade 40 Hot-Dip Galvanized High-Test Chain
Hot-Dipped galvanized Grade 40 HT Acco anchor chain! An industry standard, hot-galvanized, high-tensile anchor chain combines both high tensile strength and is resistance to wear. Meets ISO standards . Calibrated to ensure the proper fit for your windlass. 7200 lbs.
Part No: 500140702
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Grade 40 Hot-Dip Galvanized High-Test Chain
3/8IN HIGH TEST CHAIN.
Part No: 500193084
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->High Test Chain
High-test chain, sold by the foot.
Part No: 5013-40471
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Bilge Pump Parts->Bilge Pro Pump Accessories
Bilge Pro Pump Accessories Check valve- cartridge bilge. Dura Port Straight Kit. Dura Port 90 Degree Kit.
Part No: 505334
|
|
|
|
Home -> Engine Systems -> Engine Lubrication -> 2 Stroke Oil
This high-flash, ashless 2-cycle engine oil with biodegradable formulation meets or exceeds 2-cycle outboard manufacturer's warranty requirements. It provides excellent lubricity and wear and rust protection in both pre-mix and injection systems. Exceeds NMMA requirements.
Part No: 5073594
|
|
|
|
Home -> Anchor & Docking -> Anchors -> River/Lake Anchors->Mushroom Anchors
The ideal size and weight for skiffs, canoes, inflatables and other small boats in calm waters.
Part No: 508-B
|
|
|
|
Home -> Paint & Maintenance -> Tools
Better than a pipe wrench If you are not equipped with wrenches that fit the nuts on your stuffing box, we suggest you purchase TWO of these. Why? Because you will need two to make an adjustment: One for the locking nut and one for the adjusting nut. These wrenches tend to be easier to use than pipe wrenches—especially in tight engine spaces where many boaters must work. Primary Usage: Adjust/remove inboard shaft packing nut . Size: 1" to 3" adjustable .
Part No: 51008
|
|
|
|
|
Home -> Engine Systems -> Engine Parts->NGK Spark Plugs
NGK spark plugs are designed to operate over a much wider heat range than ordinary plugs. Each NGK features high alumina ceramics for better heat transfer and electrical insulation. Patented triple gasket sealing process eliminates the possibility of combustion gas leakage.
Part No: 5126
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting
Solar-Powered Sol Lights™ RailLight™ charges all day and shines all night! Clamp this solar-powered portable light to any railing, coaming, stanchion, step, ladder or dock box for up to eight hours of light with just an eight hour charge of sunlight. Coated stainless steel finish resists corrosion. Comes with two clamps: one for round railings up to 1-1/4", and a transom clamp for up to 2" thickness. Dual 700mA rechargeable and replaceable NiCad batteries.
Part No: 5201
|
|
|
|
Home -> Paint & Maintenance -> Winterizing & Storage
Winterize your outboard or sterndrive with this convenient kitUses your existing flusher and a garden hose to winterize your outboard or sterndrive engine, even while it’s on the trailer. Kit includes a five-gallon jug, hose fittings and instructions for winterizing. You supply five gallons of nontoxic antifreeze for each engine. Complete instructions are included.
Part No: 520411
|
|
|
|
Home -> Engine Systems -> Motor Mounts -> Motor Mounts
Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with nonskid pad, bolted to the UV stable poly backing board always looks shipshape. no more varnishing. Comes complete with hardware to attach to any standard 1'' (2. 5cm) stainless rail. Warning: Be sure the engine is securely tied onto the backing board and the engine mounts are tightened whenever the engine is stored on Edson's Outboard Motor Mount.
Part No: 521-100ST
|
|
|
|
Home -> Engine Systems -> Motor Mounts -> Motor Mounts
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.
Part No: 521-125AL
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Halogen Replacement Lamps
Keep spare bulbs handy in case of burnouts or breakage.
Part No: 529338
|
|
|
|
Home -> Anchor & Docking -> Anchors -> River/Lake Anchors->River Anchors
Combines the features of a traditional mushroom anchor with flukes for better bottom penetration. PVC coating is easy to clean and won’t scuff your boat. Recommended for use in protected inland waters only.
Part No: 530-E-UPC
|
|
|
|
Very common pushbutton breakers for DC loads. Uses two-blade terminals. Mounts in 3/8" hole. Can be used with a waterproof boot over the button. Buttons are white. Switch Type: Pushbutton . Voltage Compatibility: DC . Safety Features: Waterproof boots available . Housing Material: Plastic . Housing Dimensions: 1. 75" x 1.
Part No: 5321500
|
|
|
|
Home -> Safety -> Flares & Signaling Devices
Flares, flag and whistle in one handy, watertight kitA good choice for inland boating this kit contains four handheld red signal flares, a distress flag and a safety whistle, stored in an international orange, watertight, floating case that lays flat and stores easily.
Part No: 534
|
|
