Top Sellers
Large Anchor & Rode Bag from WEST MARINE
Anchor Bag Durable mesh bag provides a convenient and tangle-free place to store your anchor rode. A number of features add to the life of your rode and make it easier to deploy. The wide mouth is held open with an internal stainless steel ring, but closes easily with a drawstring. . Mesh ends dry quickly and a reinforced slit in the bottom allows the bitter end to be passed outside the bag for securing. Brass boat snap allows you to hang the bag and rode where they’re most convenient.
|
Comfort Series Automatic Inflatable Life Vest, Yellow/Charcoal from WEST MARINE
Comfortable enough for all day wear This automatic inflatable vest has an open design that lies away from your neck for a less restrictive fit and it's lighter weight to promote maximum movement—allowing you to comfortably wear it all day onboard. 5lb. Inflator Type: Halkey-Roberts V8500 6F . USCG Type: Type V with Type III performance: This vest must be worn to be counted in vessel's inventory of PFDs . Range Of Adjustment: 30"–52" adjustable chest straps .
|
|
|
Abandon Ship Dry Bag from WEST MARINE
Store critical safety and survival gear at the ready and keep it protected from wet conditions. Featuring a roll-top dry seal for complete waterproofness, this bag has plenty of room to keep essentials dry, such as a watermaker, EPIRB, instant meals and first aid supplies. Features lanyard, three internal pockets and elastic loops for flares. 30Ltr.
|
Check Valve for Cartridge Pumps from WEST MARINE
Bilge Pro Pump Accessories Check valve- cartridge bilge. Dura Port Straight Kit. Dura Port 90 Degree Kit.
|
|
|
5/16" Wire Rope Clamp from SEADOG
Investment Cast 316 Stainless Body / AISI 304 Stainless U-Bolt. Accepts 5/16" wire. 1-5/8" Long. 1-3/8" wide.
|
Resin Coloring Agent - Brown from EVERCOAT
Match colors like a pro with these coloring agentsFor use with polyester or epoxy resins, fillers, or putties. These tints also work well with nonskid coatings. Use with West Marine Gel Coat or Evercoat Polyester Gel Paste.
|
Bilge Pro Replacement Motor Cartridge for 500gph Pumps from JOHNSON PUMP
In the event of a problem, replacing your cartridge bilge pump motor is easy— provided you keep one of these on hand. Just pop out the old cartridge and pop in the new. Fit Johnson, West Marine Bilge Pro and Mayfair cartridge-style bilge and livewell pumps.
|
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
Vertical Sidelights, White from PERKO
For powerboats and sailboats less than 20m or 65. 6'. Plastic frames with ultrasonically welded lenses and gasketed plastic bases. 2nm visibility. Per pair, except bi-color. Case Material: Plastic . Case Dimensions: 3-1/2"L x 2-1/4"W x 13/16"H . Mounting Hardware: #8 FHMS (sold separately) . Volts: 12V . Draw: 0. 7A .
|
Marine Silicone Sealant, Clear, 10oz. Tube from WEST MARINE
Use wherever a flexible, removable seal is required A specially-formulated marine silicone that won’t sag, shrink or turn yellow. Can be used above and below the waterline wherever a flexible, removable seal is required. Excellent for bedding deck fittings and hardware that you may want to remove at some time. Also good for insulating between dissimilar metals to prevent galvanic corrosion. Formulation: One-part silicone sealant . Bonds to non-oily woods, metal, fiberglass, glass, plastics .
|
Lube Tube Adapter for Yamaha, Nissan, Tohatsu, Honda (2-50hp) from WEST MARINE
Marine lower unit drain, flush and fill tool. Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefishier lower units. Quick, easy and clean way to change marine lower unit gear lube. For use with all 8- and 10-oz.
|
Marine Whistle from WEST MARINE
Keep this powerful, rugged and reliable whistle attached to your PFD. Made for the marine environment, from noncorroding, high-impact plastic. No metal parts.
|
G. O'Day 222/Santana 525,Length 47", Height at tip 2 1/4", Width at butt 1 1/2", Width at tip 2" from WEST MARINE
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Can’t find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.
|
|
from AWLGRIP, 16"W from BECKSON MARINE, 8" from WEST MARINE
|
|
Home -> Anchor & Docking -> Anchor Line & Dock Line -> Chafe Gear and Snubbers->Removable Chafing Gear
Protect your docklines from chafe and extend their life with attractive ballistic nylon sleeves featuring easy Velcro™ installation/removal. Ends include 1/8"dia. nylon cords that attach to line to prevent slip. Finished edges create an aesthetically pleasing, uniform look.
Part No: CG3478-4FT
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Ports
This window track is ideal for window glass or for installing sliding cabinet doors. Each channel groove is slightly (. 005") narrower than 1/4" window glass so there is positive pressure against the glass at all times. It seals out leaks and prevents glass from rattling. Made of B-FLEX marine plastic, it will not crack or discolor. The elevated slide at the bottom of the channel makes windows or doors easy to open and close. Sold in 8' lengths.
Part No: CH-1-08
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Head Parts->Service Kits & Spare Parts for Raritan Heads
Raritan CH102MW Crown Head Complete Inlet Pump Ass'y Post 1988.
Part No: CH102MW
|
|
|
|
Home -> Engine Systems -> Control Systems -> Engine Controls
External adjustable throttle brake to avoid throttle creep and overcome governor back pressure.
Part No: CH2500P
|
|
|
|
Home -> Engine Systems -> Steering Systems
Stylish low profile flush mount design available in several function and style options. For single or dual station applications with single or twin engines. Single function (each lever controls shift or throttle). Suits 33C type cables.
Part No: CH4451P
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Holding Clips
Heavy-duty, nonmagnetic, noncorroding clips. Require four #8 FHWS fasteners.
Part No: CLP 1/4
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes
Attaches to standard Bennett trim tabs where actuator bolts to plate.
Part No: CMBNT1AZ
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Alpha I, Bravo I, Bravo II/III Outdrive & Verado Outboard Aluminum & Magnesium Anode Kits
Offered in aluminum, for use in salt or brackish water, or magnesium, for freshwater only.
Part No: CMBRAVO23KITA
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes
Supplements your boat's existing anodes An excellent anodic device to supplement a vessel’s existing anode system, especially to counteract stray current from defective shore power. Clip to bolt on outdrive. Clip to grounding strap if possible or wire items together with copper wire and clip to wire. Do not connect to negative battery terminals. Dimensions: 8 1/4"L x 3 1/4"W x 1 3/8"D.
Part No: CMGROUPER
|
|
|
|
Home -> Fishing -> Tackle Boxes & Lures -> Soft Tackle Boxes
Carry tackle on your back and leave your hands free Designed with a durable internal frame, breathable foam back support and padded shoulder straps to make carrying heavier loads of fishing gear easier. Features: Fold-out lure storage pockets. Waterproof pouch system. Padded horizontal security pocket . 10" sink compartment.
Part No: CT3000BP
|
|
|
|
Home -> Plumbing -> Fittings & Valves
For 1-1/2" flexible hose.
Part No: CV-1-1/2
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes->Water Spot Remover
Specfically developed to remove hard water spots.
Part No: D1000
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Hullgard Primer
Hullgard Epoxy Primer is a holding primer that combines excellent anticorrosion and water barrier properties with anti-fouling tie-coat functionality. Suitable for below the waterline only, it offers a long overcoating interval without sanding to reduce work time along with superb adhesion to properly prepared fiberglass, steel, aluminum and wood. Can be recoated as soon as the solvents evaporate, even at low temperatures. 1 Gal. Theoretical Coverage – 140 Sq. 5 mils/135 microns DFT or 360 Sq.
Part No: D3707/1QTUS
|
|
|
|
Home -> Cabinet & Deck Hardware -> Deck Plates & Storage -> Deck Plates->Deck Plate Storage Bag
Deck plates make great dry storage areas that are perfect for storing car keys sunglasses or any item that could be lost overboard. Nylon bag with rigid ring fits neatly into your deck plate and secures the bag. Remove the bag for access below deck or to carry items ashore. 8" bags have draw-string closures. . Fits Beckson deckplates only.
Part No: D6SKBAG
|
|
|
|
Home -> Cordage -> Anchor Line & Dock Line -> Dock Line->"Dock Buddy" Dock Line
The dock line that stretches Hook one end of the Dock Buddy to your boat cleat . Stretch the other end to dock cleat .
Part No: DB4-B
|
|
|
|
Enjoy fresh coffee ashore or afloat with this 4-cup coffee maker that plugs into any 12V outlet. Features include a durable stainless-steel carafe, dripless pour spout, knuckle guard, 30-minute auto shut off, “On” indicator light, and a convenient “Brew Pause” feature that lets you pour a cup of coffee before brewing has finished. Includes coffee scoop and three filters. 10 1/4"H x 5 1/4"W x 7 5/8"D.
Part No: DCC-450BK12
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware
Perfect for attachment to a bow eye or sand spike, this combo carabiner/ cam cleat eliminates the periodic hassle of correcting and retying your beach or anchor line. Just pass the line through the cam cleat and pull tight. Made of 304 stainless steel. For boats to 6,000lb. that anchor in protected waters. For use with 3/8"-5/8" line, sold separately. Holds up to 8,000lb.
Part No: DH
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs
All-nylon drain and plug with a plastic retainer and O-ring.
Part No: DP10-B
|
|
|
|
Home -> Cabinet & Deck Hardware -> Deck Plates & Storage -> Deck Plates->Screw In Deck Plate
These innovative deck plates provide an attractive, economical way to access horizontal and vertical storage areas. They have two seals and an O-ring for complete waterproofness.
Part No: DPS-6-1-DP
|
|
|
|
Home -> Plumbing -> Marine Sanitation
Watertight design and automatic rewind ensure that your toilet tissue stays dry. Smooth textured ABS plastic. Accepts standard toilet tissue rolls.
Part No: DR-W-RP
|
|
|
|
Home -> Paint & Maintenance -> Winterizing & Storage->Wrap-It-Up Shrink-Wrap Accessories
Protect your boat from rain, snow, UV damage, airborne debris and pests during winter storage During long periods of storage, your uncovered boat is susceptible to damage from a number of sources–rain, snow, blowing dirt and debris, bird droppings, UV radiation and nesting birds and rodents. ”Wrap-It-Up“ is a do-it-yourself shrink-wrap system that provides your boat with the protection it deserves during the long off-season. Buy it once and reuse it year after year. Buy a new kit every year.
Part No: DS-001
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Teak Wonder Teak Treatments
Restores and protects the splendid beauty of teakTwo-part system cleans away dirt and black discoloration and restores teak to a lustrous hue. Won't affect paint, varnish or metal surfaces. Follow up with Sealer/Dressing Step one loosens dirt and mildew. Step two neutralizes step one. Rinsing reveals the bright natural beauty of the wood.
Part No: DS-01
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Webbing Ladders
Lightweight, portable, and easy-to-store. Strong 4" cargo webbing provides a soft cradle for your foot for easy, comfortable boarding.
Part No: DSS01W
|
|
|
|
Home -> Cordage -> Rigging Products -> Slides & Shackles->Sail Ties
Sail ties with a clever twistOur premium-quality tubular nylon webbing ties have a clever twist: a sewn loop at one end, with a twist that keeps the eye open so it’s easy to thread even with cold hands. Tie a simple slip knot and you’re done! Color-coded so you can quickly select the size you need.
Part No: DST5TW
|
|
|
|
Home -> Sailboat -> Rigging Products -> Mast Going Aloft Gear
Ergonomic shape allows a more comfortable fit. Kevlar® covers on the leg straps give essential protection against deck abrasion. Extra wide leg straps: Double the width of a typical climbing harness . Spike pocket: A tapered stretch pocket on the back of the harness belt locates a marlinespike safely and securely, but allows easy access. Sized to fit waists measuring 24-40" (62-101cm) and legs measuring 18-25" (measuring the circumference of your thigh with tensed muscles).
Part No: DW-MPH
|
|
|
|
Home -> Electronics -> Autopilots->SmartPilot X-5 Wheel Pilot
The innovative SmartPilot X-5 Wheel autopilot is equipped with the fully enclosed MkII wheel-drive for simple installation and below deck autopilot performance. The control unit and patented fluxgate compass are mounted separately for easy access and optimum performance. Select the corepack (without a control head, but including the course computer, fluxgate compass and drive unit) if you already have a control head and only need the rest of the autopilot system.
Part No: E12201
|
|
|
|
This powerful workhorse makes hauling prawn and crab pots quick and easy. Designed for high-speed retrieval with a robust 1. The heavy-gauge, marine-grade aluminum frame is powder coated for corrosion-resistance and can handle loads up to 150lb. The included foot control switch provides safety, ease of use and allows both hands free to bail line. Engineered to mount on the Scotty downrigger mount #1023, Model 435050, found on page 922. Stainless-steel internal shafts, fasteners and hardware.
Part No: EPP 600
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Catches & Latches->Stainless Steel Magnetic Clasps
Stainless Steel Magnetic Clasps for 3/4" thick surfaces.
Part No: F16-0012-1
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
Spring-loaded ring immediately returns to flush when released. Type 304 stainless steel . Size: 2 x 2 3/8" .
Part No: F16-1812-1W
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Handles & Pulls->Stainless Steel Bar Handles
Brushed, 304 grade stainless steel pull handles feature smooth rounded ends, hidden fasteners and a stylish contemporary Euro design. Wide range of sizes available from 6 1/4" to 25" for cabinets and drawers of all sizes.
Part No: F16-5524-1W
|
|
|
