Brightside Pre-Kote Primer
Clearance offer reflects an additional 25% off the lowest price for in-store pick up only.
Before applying a topside enamel, begin the job right with Pre-Kote One-Part Primer.
Pre-Kote* is VOC compliant, one-part undercoater formulated for use with Toplac®, Brightside® Polyurethane or any one-part topside enamel. Pre-Kote contains microspheres which help you to attain the necesary build and also improve sandability. Pre-Kote replaces Brightside Primer and 279 White Undercoater.
Key Features
- Contains microspheres which give Pre-Kote a superior build
- VOC compliant
- Can be used with any one-part topside finish
- Improves topcoat flow
- Type: One-part polyurethane with microspheres
- Finish: Matte
- Available Colors: White, Gray
- Components: 1
- Curing Mechanism: Solvent release
- Solids by Volume: 61%
- Coverage: 450sq.ft/gal.
- VOC: 330g/l
- Application Method: Brush, roller, airless or conventional spray
- Number of Coats Recommended: 1-2
- Wet Film Thickness/coat: 3.5 mils
- Dry Film Thickness/coat: 2 mils
- Application Temperature Min./Max. Range: 10°C/50°F--29°C/85°F
- Thinner: Brush: 333 - Model 117945; Spray: 216 - Model 117598
Drying Times* (Hours)
Drying | @50°F | @73°F | @95°F |
---|---|---|---|
To Touch | 3 hr. | 2 hr. | 1 hr. |
To recoat | 12 hr. | 8 hr. | 6 hr. |
*The above dry times are minimums. May be recoated after the minimum time shown. There is no maximum dry time before launching.
More information
For detailed application instructions see the Interlux Pre-Kote Data Sheet. NOTE: Manufacturer data sheets are subject to revision. Linked data sheets are believed to be accurate at the time of publication.