Skip to content Skip to navigation menu

INTERLUX
Flattening Agent for Two-Part Polyurethanes

$52.99

Hazard Shipping – Ships ground in U.S. Lower 48.
Model # 6862270 | Mfg # YZM914KIT/QT
In stock online.
Achieve professional-quality results with this simplified two-part painting system

Simpler to use then other two-part polyurethanes, Perfection has been formulated to enable "do-it-yourselfers" to achieve professional quality results with ease on topsides, superstructure and decks. Produces a finish with superb color and gloss retention and provides prolonged impact and abrasion protection-even on the highest wear areas. It is resistant to a wide range of chemicals, including fuels, mild acids and detergents. May be brushed, rolled, or sprayed over primed fiberglass, wood, aluminum, or steel. Not for use over one-part enamels.

  • Base Formulation: Two-part linear polyurethane
  • Application: Brush, spray, roll & tip
  • Number of Coats Recommended: Two/three
  • Primer Needed: 404/414 Epoxy Primekote, Model 180570
  • Drying Time: To touch: 2 hrs. @73°F
  • Drying Time to Recoat: Overcoat: 6-48 hrs
  • Overcoat: 6-48 hrs

Flattening Agent for Two-Part Polyurethanes

Capacity Quart
Color Two-Part Flattening Agent
Coverage 488 Square Feet per Gallon
Cure Time 6 to 48 Hours to Overcoat
Type Two-Part Linear Polyurethane

West Advisor

The West Advisor articles have answered boaters' questions and provided solutions to boating problems for more than 20 years. West Marine has compiled one of the Web's most comprehensive collections of technical boating information articles.