Flattening Agent for Two-Part Polyurethanes, Quart
$85.99
Model #
6862270
Mfg #
YZM914KIT/QT
Quantity not available. Please adjust.
Temporarily Out of Stock
Thank you!
We'll let you know when it's back in stock.
-
+
Achieve professional-quality results with this simplified two-part painting system.
Simpler to use then other two-part polyurethanes, Perfection has been formulated to enable "do-it-yourselfers" to achieve professional quality results with ease on topsides, superstructure and decks. Produces a finish with superb color and gloss retention and provides prolonged impact and abrasion protection-even on the highest wear areas. It is resistant to a wide range of chemicals, including fuels, mild acids and detergents. May be brushed, rolled, or sprayed over primed fiberglass, wood, aluminum, or steel. Not for use over one-part enamels.
Key features
- Reduces the gloss of perfection or perfection plus
- Can be applied to boat decks, spars, masts and on most surfaces
- Reduces gloss level from high gloss to a satin finish
Specifications
- Base Formulation: Two-part linear polyurethane
- Application: Brush, spray, roll & tip
- Number of Coats Recommended: 2-3
- Primer Needed: 404/414 Epoxy Primekote, Model 180570
- Drying Time: To touch; 2 hrs ;To recoat: 6-48 hrs.
Capacity
1 Quart
Color
Clear
Coverage
488 Square Feet/Gallon
Cure Time
To Overcoat: 6-48 Hours; To Touch: 2 Hours
Type
Two-Part Linear Polyurethane
Cancer and Reproductive Harm –
www.P65Warnings.ca.gov