Copper Bronze Antifouling Paint
A traditional favorite
Modified epoxy antifouling with an attractive, traditional bronze finish. Great for classic runabouts. 33.2% cuprous oxide provides resistance to algae, barnacles, grass and zebra mussels. Bronze color.
Key features
- Cuprous oxide for aggressive fouling protection
- Modified epoxy with a hard finish, withstands season-long use
- Compatible over previously applied antifoulings
- Great protection for trailered boats
Physical Data
- Type: Modified Epoxy/Rosin
- Finish: Flat
- Available colors: Brown
- Components: 1
- Curing mechanism: Solvent Release
- Solids by weight: (Theoretical): 74% +/- 2%
- Solids by volume: (Theoretical): 49 +/- 2%
- Coverage: 400sq.ft. /gallon
- VOC: 440 grams/liter (Max)
- Active ingredients: Cuprous Oxide
- Flash point: 100°F
Application
- Application Method: Brush, roller, conventional spray, airless spray
- Number of coats: recommended: 2
- Dry Film Thickness: 2 mils
- Wet Film Thickness: 4.1 mils
- Applicator: High-quality short nap roller (maximum 3/8” nap)
- Application temperature: Min. /Max. Range: 90° F. Min/40°F. Max
- Thinner: Pettit 120 Brushing Thinner (Models 249953, 249961); Pettit 121 Spraying Thinner (Models 249987, 249995)
Drying times (Hours)
| Drying | @40°F | @70°F | @90°F |
|---|---|---|---|
| To recoat | 6 hr. | 4 hr. | 2 hr. |
| To launch | 24 hr. | 16 hr. | 8 hr. |
*The above dry times are minimums. May be recorded after the minimum time shown. There is no maximum dry time before launching.
Get the right amount of paint:
| Boat Type | Bottom Paint |
|---|---|
| 10' Dinghy | 1 qt. |
| 14' Outboard | 1-2 qt. |
| 18' Runabout | 2 qt. |
| 20' Sailboat | 3 qt. |
| 24' Runabout | 3-4 qt. |
| 30' Sailboat | 1.5 gal. |
| 32' Cruiser | 1.5-2 gal. |
| 36' Auxiliary | 2 gal. |
| 40' Cruiser | 2.5 gal. |
| 45' Sailboat | 3-3.5 gal |
| 50' Sportfisher | 4+ gal. |
Another way to determine bottom paint quantity is to estimate the approximate surface area of the hull below the waterline, using the following formula:
Length x Beam x .75 = Approximate underwater surface area in square feet.
Each paint has a “theoretical coverage” area, but most paints require at least two coats, so you can expect actual coverage to be no greater than half of the theoretical value.
More Information
For detailed application instructions and to view available colors, see the Pettit copper bronze Data sheet.
NOTE: Manufacturer data sheets are subject to revision. Linked data sheets are believed to be accurate at the time of publication.
