EZ CabinCoat, Quart
Clearance offer reflects an additional 25% off the lowest price for in-store pick up only.
EZ Cabin-Coat provides a moisture resistant and a mildew proof finish.
Specially formulated to provide a moisture-resistant, mold- and mildew-proof finish, water-based EZ CabinCoat easily withstands humid conditions that foster unsightly mildew growth and cause paint failures in cabin interiors. Adhesion to most glossy surfaces is excellent without a need for sanding. Cleans up easily with soap and water.
Key Features
- Interior high-performance coating for surfaces prone to moisture
- Tough mildew-proof finish
- Adheres to any glossy surface without having to sand
- Dries fast with low order and easy to apply
- Withstands humid conditions that can cause paint failures
Physical Data
- Base Formulation: Water based emulsion
- Finish: Satin
- Available colors: Off white, Platinum grey, White
- Components: 1
- Curing mechanism: Air dry
- Solids by Volume: 39.9% +/- 2% (Theoretical)
- Solids by weight: 50.9% +/- 2% (Theoretical)
- Coverage: 110sq. ft./quart
- VOC: 140 g/l Max. (as supplied)
- Flash point: None
Application
- Application Method: Brush, roller or spray
- Number of coats recommended: 2 coats minimum
- Wet Film Thickness: 3.0 mils
- Dry Film Thickness: 1.5 mils
- Applicator: High-quality short nap roller (maximum 3/8” nap) brush
- Application temperature Min. /Max. Range: Minimum 50°F and Maximum 90°F.
- Thinner: 120 Brushing Thinner 121 spraying thinner; Model 249961; 121 - Model 249995
Drying Times*(Hours)
Drying | @50°F | @70°F | @90°F |
---|---|---|---|
4 hr. | 2 hr. | 1 hr. | |
*The above dry times are minimums. May be recorded after the minimum time shown. There is no maximum dry time before launching.
More information
For detailed application instructions and to view available colors, see the Pettit EZ Cabin-Coat Data Sheet.
NOTE: Manufacturer data sheets are subject to revision. Linked data sheets are believed to be accurate at the time of publication.