Pettit Protect® High Build Epoxy Primer Kits
Frequently Bought Together
This versatile epoxy primer prevents corrosion in metals and osmotic blistering in fiberglass hulls.
A heavy-duty, two-component, epoxy coating formulated to reduce water absorption, Pettit Protect is an excellent choice for osmotic blister prevention and repair. The high-solids formula allows for quicker and easier application with fewer coats necessary for effective protection. It also offers dependable corrosion protection on all underwater metals. Two-part kit makes one gallon.
Key features
- Reduces water absorption in fiberglass hulls and prevents osmotic blistering
- High film build for maximum protection with fewer coats
- Exceptional protection for steel, aluminum, and other metals
- High Performance System for Underwater Running Gear
Physical data
- Type: Epoxy/Polyamide
- Finish: Low Luster
- Components: 2
- Curing mechanism: Chemical cure
- Solids by weight: 71 ± 2%
- Solids By volume: 56 ± 2%
- Coverage: 225 sq. ft/gal.
- VOC: 337 Grams/liter
- Flash point: 80°F
Application
- Application Method: Brush, Roller, Airless or Conventional Spray
- Number of coats: 3 minimum
- Dry film thickness: 4 mils
- Application tempature: 50° F. Min. - 90° F. Max
- Thinner: 97 Epoxy Thinner
Drying Times* (Hours)
Drying | @50°F | @70°F | @90°F |
---|---|---|---|
To recoat | 6 hr. | 3 hr. | 2 hr. |
To launch | 120 hr. | 24 hr. | 12 hr. |
More information
For detailed application instructions see the Pettit Protect Data Sheet. NOTE: Manufacturer data sheets are subject to revision. Linked data sheets are believed to be accurate at the time of publication.