The West Advisor®
|
C.Sherman Johnson Rigging
C.sherman Johnson Backstay Turnbuckles, Jaw & Turnbuckle, 5/16" Max. Wire Dia., 1/2" Pin 10,500lb. Breaking Strength . Feature dual handles for quick adjustment. Upper handle locks the turnbuckle when closed. Length closed: 15". Length open: 21". Thread size: 5/8-18. Bronze rods eliminate any...
Brand: C.sherman Johnson
- Turnbuckle Bodies
- Sailboat Hardware > Mast & Standing Rigging > Turnbuckles & Toggles
- $16.99 - 107.99 USD
C.sherman Johnson Turnbuckle Bodies 1/2" Body . Chrome-plated bronze.
Brand: C.sherman Johnson
- Swage Studs
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $4.88 - 89.99 USD
C.sherman Johnson Swage Studs Stud, 1/8" Wire Size, 1/4 28lh Thread . The wire end of the turnbuckle generally uses right hand (RH) threads, and the deck end uses left hand (LH) threads. Note that there are two dimensions: The wire diameter and the thread size.
Brand: C.sherman Johnson
- Aircraft Swage Eyes
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $64.99 - 87.99 USD
C.sherman Johnson Aircraft Swage Eyes Eye, 3/8" Wire Size, 1/2" Dia. . Type 316 stainless. Used like marine eyes, but thinner across to fit in narrow forks.
Brand: C.sherman Johnson
C.sherman Johnson Tubular Body, Stainless Steel Turnbuckles Jaw & Swage, 1/4" Wire, 3/8 24 Thread, 3/8" Pin Dia., 7000lb. Tens. Strength, Adj. . Series 03 and 04 include LH upper terminals (unless designated RH). All other series are RH. Positive locking style has captive lock rings All others...
Brand: C.sherman Johnson
C.sherman Johnson Quick Release Shroud Levers Small, 7 Holes, 1 7/8" Adj. Range, 1/4" Chainplate Pin Dia., 1/8" Wire . Permit easy rigging adjustments, and allow masts to be stepped and unstepped easily. The lever is easy to open and close under load and has a quick release pin for security....
Brand: C.sherman Johnson
- T Bolts with Toggle
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $10.99 - 62.99 USD
C.sherman Johnson T Bolts With Toggle Toggle, 1/2" Pin Dia., 5 11/16"l . 316 stainless steel with lefthand threads. Length is measured from bottom of cotter hole to center of clevis pin. Measure in Body/Pin is for each body and pin.
Brand: C.sherman Johnson
C.sherman Johnson Split Backstay Adjuster . Instead of coupling three blocks together to get the required purchase, this sheave assembly is integral and reduces the point loading on the backstay by using two sheaves per bridle. Delrin plain bearing sheaves for wire to 3/16" and boats to 30' LOA....
Brand: C.sherman Johnson
- Hand Crimp Tool
- Sailboat Hardware > Mast & Standing Rigging > Rigging Tools
- $47.99 - 56.99 USD
C.sherman Johnson Hand Crimp Tool . Precisely machined and hardened dies maximize the strength of hand crimp wire terminals. The resulting connection should retain 70% of the breaking strength of the wire.
Brand: C.sherman Johnson
- Stay Adjusters
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $19.99 - 43.99 USD
C.sherman Johnson Stay Adjusters Adjuster, 3/32" Wire Dia., 3/16" Pin Adj. Range, 1000lb. Breaking Strength . Knurled nut permits precise, one-handed adjustment. Terminal rod is captive, so it cannot come apart even when fully extended. Jaw and clevis pin at one end; swage stud at the other....
Brand: C.sherman Johnson
C.sherman Johnson Turnbuckle, Eye And Swage Machine 3/16" Wire, 3" Adj. Range, 1/4 28 Thread . Exclusively for lifeline applications. 1/4" pin dia. Lock nuts prevent loosening.
Brand: C.sherman Johnson
- Toggle Jaws
- Sailboat Hardware > Mast & Standing Rigging > Turnbuckles & Toggles
- $12.99 - 19.99 USD
C.sherman Johnson Toggle Jaws Machine Swage Jaw, 3/16" Wire, 1/4" Pin Dia. . Can accept some off-axis alignment due to the toggle and clevis pin.
Brand: C.sherman Johnson
C.sherman Johnson Stainless Steel Shroud Cleat . All stainless-steel construction, compatible with your stainless-steel rigging. Will not corrode. The shroud cleat is easily attached to 5/32" through 3/8" dia. wire or rod. Ideal for flag, radar reflector and steaming shape halyards with an eye...
Brand: C.sherman Johnson
C.sherman Johnson T Style Turnbuckle Jaw Jaw, 5/16" 24 Rh Thread Size . All toggle jaws can be used for life line and rigging applications. Deck Toggles are used for lifeline and architectural applications only. Use for lifeline or rigging applications.
Brand: C.sherman Johnson
|
Sign In
