No image available
No image available
Your request is being processed.
Shopping Cart

Clevis Sailboat Hardware

Link Tangs
  • Link Tangs
  • Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
  • $37.99 - 114.99 USD
Schaefer Link Tangs Tang, 1/2" Pin Dia., 5 5/8" Adj. Range, 1/4" Strap Width . High-quality stainless. Used with marine eyes or toggles to permit shroud adjustment. Sold in pairs with clevis and cotter pins.
Brand: Schaefer
Shop Now
Triangle Plates
  • Triangle Plates
  • Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
  • $24.99 - 87.99 USD
Schaefer Triangle Plates Plates, 3/8" Pin Dia., 2 3/4" Width . Create your own adjustment system on any split backstay rig. Plates are Type 304 stainless steel, and come in pairs with three clevis and cotter pins. Additional sizes available through Special Order.
Brand: Schaefer
Shop Now
Toggle Assembly with Clevis Pin
Harken Toggle Assembly With Clevis Pin . Toggle assembly with 5/8" (15.9 mm) clevis pin (MKIV Unit 2 Furler)
Brand: Harken
Shop Now
T Bolts with Toggle
  • T Bolts with Toggle
  • Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
  • $10.99 - 62.99 USD
C.sherman Johnson T Bolts With Toggle Toggle, 1/2" Pin Dia., 5 11/16"l . 316 stainless steel with lefthand threads. Length is measured from bottom of cotter hole to center of clevis pin. Measure in Body/Pin is for each body and pin.
Brand: C.sherman Johnson
Shop Now
150 Piece Rigging Kit
  • 150 Piece Rigging Kit
  • Sailboat Hardware > Shackles > Snaps & Fittings > Cotter & Clevis Pins
  • $59.99 - 62.99 USD
West Marine 150 Piece Rigging Kit . Cotter rings, clevis pins and cotter pins in common sizes Assorted sizes of stainless-steel cotter rings, cotter pins and clevis pins. Contains 7/16", 3/4", 7/8" and 1-1/8" cotter rings Includes nine sizes of clevis pins from 3/16" dia. to 1/2" dia. and...
Brand: West Marine
Shop Now
Small Boat Clevis Pin Kit
C.sherman Johnson Small Boat Clevis Pin Kit . Assorted sizes of stainless-steel clevis and cotter pins. Small Boat kit contains 46 pieces ranging from 3/16" 5/16". Big Boat kit contains 36 pieces, ranging in from 5/16" 1/2".
Brand: C.sherman Johnson
Shop Now
Stainless Steel Clevis Pins
Fasco Fastener Stainless Steel Clevis Pins 5/16" X 1" Set (25 Pack) . 18-8 Stainless-Steel Clevis Pin Sets.
Brand: Fasco Fastener
Shop Now
Stay Adjusters
  • Stay Adjusters
  • Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
  • $19.99 - 43.99 USD
C.sherman Johnson Stay Adjusters Adjuster, 3/32" Wire Dia., 3/16" Pin Adj. Range, 1000lb. Breaking Strength . Knurled nut permits precise, one-handed adjustment. Terminal rod is captive, so it cannot come apart even when fully extended. Jaw and clevis pin at one end; swage stud at the other....
Brand: C.sherman Johnson
Shop Now
00AL Jib Reefing & Furling Clevis Pin Assemblies
Harken 00al Jib Reefing & Furling Clevis Pin Assemblies 5/16" Assembly For . Clevis pin assemblies for 00AL Jib Reefing and Furling
Brand: Harken
Shop Now
Marine Swage Eyes
  • Marine Swage Eyes
  • Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
  • $7.79 - 34.81 USD
Ronstan Marine Swage Eyes Eye, 3/16" Wire, 3/8" Dia. . Used to connect wire to fittings with clevis pins, like mast terminals, forks, double jaw turnbuckles, etc. Type 316 stainless. Marine eyes are heavier and stronger than aircraft eyes.
Brand: Ronstan
Shop Now
Toggle Jaws
  • Toggle Jaws
  • Sailboat Hardware > Mast & Standing Rigging > Turnbuckles & Toggles
  • $12.99 - 19.99 USD
C.sherman Johnson Toggle Jaws Machine Swage Jaw, 3/16" Wire, 1/4" Pin Dia. . Can accept some off-axis alignment due to the toggle and clevis pin.
Brand: C.sherman Johnson
Shop Now
Cotter & Clevis Fastener Kit
West Marine Cotter & Clevis Fastener Kit . A 66-piece assortment of cotter rings ranging from 3/8" to 7/8" diameter to fit clevis pins from 3/16" to 3/8"; cotter pins from 1/16" x 3/4" to 1/8" x 1-1/2"; and clevis pins from 3/16" x 3/4" to 3/8" x 1".
Brand: West Marine
Shop Now
Clevis Slide Top Cap Unit
Sea Dog Clevis Slide Top Cap Unit . Investment Cast 316 Stainless 1" Tube OD 1/4" Pin size
Brand: Sea Dog
Shop Now
Cotter Ring Kit
  • Cotter Ring Kit
  • Sailboat Hardware > Shackles > Snaps & Fittings > Cotter & Clevis Pins
  • $14.49 - 15.49 USD
West Marine Cotter Ring Kit . A handy selection of commonly-sized cotter rings. Each assortment contains rings ranging from 3/8" to 1 1/8" diameter, and sized to fit clevis pins from 3/16" to 1/2" diameter. Contains 66 pieces. All stainless steel.
Brand: West Marine
Shop Now
Vang Swivel
  • Vang Swivel
  • Sailboat Hardware > Shackles > Snaps & Fittings > Trapeze Gear
  • $9.88 USD
Rwo Vang Swivel . Lightweight swivel is made from high-grade marine materials to tolerate high loads. Includes clevis pin, rings and split pins. Measures 1 1/8''L x 1/4''W Pin dia.: 3/16'' Breaking load: 800 lb
Brand: Rwo
Shop Now
Stainless Steel Clevis Pins
West Marine Stainless Steel Clevis Pins 5/16'' X 1'' [1 Qty] . Stainless Steel Clevis Pins
Brand: West Marine
Shop Now
Stainless Steel Cotter Rings
West Marine Stainless Steel Cotter Rings 3/16" Clevis Pin Dia., 3/8" Inside 10 Pack . Stainless-Steel Cotter Rings
Brand: West Marine
Shop Now
Microloc Tamper Resistant Clevis Pin
Ronstan Microloc Tamper Resistant Clevis Pin Pin, 1/4" Diameter . Microloc turnbuckles are a compact all Stainless Steel solution for use in applications where tensioning is required but space and weight are at a premium. The sleek fork ends can be quickly and easily secured with easy access...
Brand: Ronstan
Shop Now

© West Marine All Rights Reserved p-wcsapp02.westmarine.net