Downwind Cars

• UTS 350 UGPS Pole, UTS Inboard End Fitting, UGPS Outboard End Fitting, 3.5" Pole Dia., 15' Kit Length (with Ends)
• Sailboat Hardware > Downwind Poles & Cars > Whisker Poles
• $1564.90 - 1646.68 USD

Forespar Uts 350 Ugps Pole, Inboard End Fitting, Outboard 3.5" Dia., 15' Kit Length (with Ends) . Offshore Series spinnaker poles provide the serious racer with rugged, reliable and efficient equipment. They re designed for the rigors of extended offshore racing. Note: Due to the variety of...

• UXP 350 UXP Pole Kit, ULTRA Piston Fitting Both Ends, 3.5" Pole Dia., 15'5" Kit Length (with Ends)
• Sailboat Hardware > Downwind Poles & Cars > Whisker Poles
• $947.76 - 997.24 USD

Forespar Uxp 350 Pole Kit, Ultra Piston Fitting Both Ends, 3.5" Dia., 15'5" Length (with Ends) . Standard Spinnaker Poles have a double bridle topping lift/foreguy system. Unless otherwise specified, all standard poles are supplied with the throat (jaw) facing upward. Requires Forespar Ring...

• UTS 300 UTR Pole, TS Inboard End Fitting, GP Outboard End Fitting, 3" Pole Dia., 13.5' Kit Length (with Ends)
• Sailboat Hardware > Downwind Poles & Cars > Whisker Poles
• $857.14 - 901.88 USD

Forespar Uts 300 Utr Pole, Inboard End Fitting, Gp Outboard 3" Dia., 13.5' Kit Length (with Ends) . Offshore Series spinnaker poles provide the serious racer with rugged, reliable and efficient equipment. They re designed for the rigors of extended offshore racing. Note: Due to the variety of...

• UTR 250 UXP Complete Pole, ULTRA Trigger One Eend/ULTRA Piston Other, 2.5" Pole Dia., 11'6" Kit Length (with Ends)
• Sailboat Hardware > Downwind Poles & Cars > Whisker Poles
• $593.08 - 624.80 USD

Forespar Utr 250 Uxp Complete Pole, Ultra Trigger One Eend/ultra Piston Other, 2.5" Dia., 11'6" Kit Length (with Ends) . Standard Spinnaker Poles have a double bridle topping lift/foreguy system. Unless otherwise specified, all standard poles are supplied with the throat (jaw) facing upward....

• Toggle Car T 125 & Replacement Runners
• Sailboat Hardware > Downwind Poles & Cars > Spinnaker Pole Mast Cars
• $16.29 - 472.88 USD

Forespar Toggle Car 125 & Replacement Runners Heavy Duty Fc . Cars are all-stainless with stainless toggle pin for socket-type pole ends. Cars have holes provided for optional uphaul/downhaul shackles. Replacement runner fits AT-125-S and T-125-S.

• Piston Pole End with Trigger
• Sailboat Hardware > Downwind Poles & Cars > Pole End Fittings & Tubing
• $314.99 - 359.00 USD

Harken Piston Pole End With Trigger . Piston Pole End with Trigger, Weight 52.9 oz.

• Captive Ball Bearing Spinnaker Pole Cars
• Sailboat Hardware > Downwind Poles & Cars > Spinnaker Pole Mast Cars
• $240.17 - 290.18 USD

Harken Captive Ball Bearing Spinnaker Pole Cars Car, Track #1616, 1350sq.ft. Max. Sail Area, 2100lb. Swl . Now with captive ball bearings, which eliminates the need for a ball-bearing loader during installation or removal from track. These cars run freely, fit low-beam traveler track and are...

• Spinnaker Pole Slider
• Sailboat Hardware > Downwind Poles & Cars > Spinnaker Pole Mast Cars
• $109.99 USD

Schaefer Spinnaker Pole Slider . Welded stainless pole slider is constructed with a formed ring that is heliarc-welded to the slide, so it bends rather than breaking under extreme load. For 1" T-track. 1-3/16" ring diameter, 9/32" wire stock. Weight: 4.5oz.

• Stainless Steel Basket Only for Marelon Water Strainer
• Sailboat Hardware > Downwind Poles & Cars > Whisker Poles
• $41.99 - 43.96 USD

Forespar Stainless Steel Basket Only Marelon Water Strainer . Stainless-Steel Basket Only for Marelon Water Strainer

• Clear Cover Only for Marelon Water Strainer
• Sailboat Hardware > Downwind Poles & Cars > Whisker Poles
• $25.99 - 27.28 USD

Forespar Clear Cover Only Marelon Water Strainer . Clear Cover Only for Marelon Water Strainer

• Spinnaker Pole Ring
• Sailboat Hardware > Downwind Poles & Cars > Spinnaker Pole Mast Cars
• $21.67 - 23.65 USD

Ronstan Spinnaker Pole Ring . Curved, diamond-shaped base mast pad eye fits masts with a 2 3/8" base radius. Ring measures 30mm (1 3/16") dia. 1/4" stainless rod. Weight: 1.6oz. Attaches with four 1/4" RHMS.