The West Advisor®
|
Eye Plate Sailboat Hardware
- High Strength Pad Eye
- Sailboat Hardware > Shackles > Snaps & Fittings > Eye Straps & Fairleads
- $82.99 - 89.99 USD
Spinlock High Strength Pad Eye . High-strength, low-weight 17.4PH stainless steel pad eye has integral "U" bolt fastenings that make these the lightest and strongest pad eyes available. Eye load is transmitted directly to deck. Excellent strength/weight ratio. Includes backing plate and...
Brand: Spinlock
Schaefer Round Base Stainless Steel Pad Eyes Backing Plate For 2 1/2" Dia. Heavy Duty (model 129478), Hole Centers A*, 1" . All dimensions are center-to-center. Oblong pad eyes are measured as shown. Round pad eyes are measured inside hole to inside hole, not across the middle (not shown)....
Brand: Schaefer
- Mast Pad Eye
- Sailboat Hardware > Downwind Poles & Cars > Spinnaker Poles & Gear
- $47.49 - 51.81 USD
Ronstan Mast Pad Eye . Stainless steel. For use with larger "pushbutton" poles. Mounting plate: 2-3/4" x 2" ID: 1-3/4" Ring: 7/16" thick Attaches with four 1/4" RHMS Bent to accommodate curved masts with a radius of 3-1/8"
Brand: Ronstan
- Halyard Exit Plates
- Sailboat Hardware > Shackles > Snaps & Fittings > Eye Straps & Fairleads
- $12.99 - 29.99 USD
Schaefer Halyard Exit Plates . Lessens halyard chafe without the expense of a sheave box. Stamped stainless steel
Brand: Schaefer
West Marine U Bolt Stainless Steel Pad Eye . 7/16" Dia. Rod without Backing Plates, 3,500lb. MWL, 2-1/16" Inside Dia., 3-1/2" Long Threads, 2-5/8" Hole Centers A* All dimensions are center-to-center. Oblong pad eyes are measured as shown. Round pad eyes are measured inside hole to inside hole,...
Brand: West Marine
- Eye Bolts
- Sailboat Hardware > Shackles > Snaps & Fittings > Eyebolts & U Bolts
- $9.49 - 21.99 USD
Sea Dog Eye Bolts 8mm (5/16") Stock Dia. Bolt, 2 9/16"l, Hole Dia., Length, 1" Plate . Machined from 304 stainless steel. Metric threads.
Brand: Sea Dog
- U Bolts
- Sailboat Hardware > Shackles > Snaps & Fittings > Eyebolts & U Bolts
- $9.99 - 17.99 USD
West Marine U Bolts 1/4" Stock Dia. Bolt, Thread Length, 5/16" Hole Spacing, 1/16" Eye . Stainless steel U-Bolts have metric threads. The top plate is held in place by small ears that are forged into the U-bolt. Includes matching backing plate. ShWt .1
Brand: West Marine
- Swivel Eye Boat Snaps
- Sailboat Hardware > Shackles > Snaps & Fittings > Utility Eye Snaps
- $4.49 - 14.99 USD
West Marine Swivel Eye Boat Snaps Snap, Nickel, 3/4" Id, 1/4" Length, 3/8" Opening . Polished naval bronze or nickel-plated brass.*Model 116103 has a unique opening method (see photo).
Brand: West Marine
- Fixed Eye Boat Snaps
- Sailboat Hardware > Shackles > Snaps & Fittings > Utility Eye Snaps
- $5.49 - 14.49 USD
West Marine Fixed Eye Boat Snaps Snap, Nickel, 3/4" Id, Length, 1/2" Opening . Polished naval bronze or nickel-plated brass.
Brand: West Marine
- Bow/Stern Eyes
- Sailboat Hardware > Shackles > Snaps & Fittings > Eyebolts & U Bolts
- $10.99 - 11.49 USD
Suncor Bow/stern Eyes 3/8" Eye, 1.03" Id Between Studs X 4" Thread Length . 304 Stainless Steel - Formed Each U-Bolt set includes four nuts (two standard and two beveled) Includes one bow plate, and one stern plate Threads are "UNC"
Brand: Suncor
Sea Dog Stainless Steel Bow Eye . Sea-Dog Bow Eyes come with adjustable finished nuts as compared to the crimped ring used on most other bow eyes. The 3/8" and 7/16" shafts have rolled threads; the 1/2" and 5/8" stock have cut threads. All parts are made of stainless steel. Plate sizes:...
Brand: Sea Dog
- Eye Plate with Ring
- Sailboat Hardware > Shackles > Snaps & Fittings > Eye Straps & Fairleads
- $9.99 USD
Sea Dog Eye Plate With Ring . Made of stamped 304 stainless steel. Useful as a lifting eye or in mooring applications. 3-3/16"L x 1-15/16"W; hole centers 2-9/16"L x 1-5/16"W. Ring ID: 1-3/4". Use #10 FHMS fasteners.
Brand: Sea Dog
- Bow Eye
- Sailboat Hardware > Shackles > Snaps & Fittings > Eyebolts & U Bolts
- $9.99 USD
Sea Dog Bow Eye . Chrome-plated zinc eye. Zinc-plated steel bolts, nuts and washers. Shank length: 3'' Stock diameter: 3/8'' Eye: 1'' SWL: 2000
Brand: Sea Dog
- Bow Eye
- Sailboat Hardware > Shackles > Snaps & Fittings > Eyebolts & U Bolts
- $6.99 - 7.49 USD
Sea Dog Bow Eye . Chrome-plated eye. Zinc-plated steel bolts, nuts and washers. Shank length: 4-5/8". Stock dia.: 3/8". Eye: 15/16".
Brand: Sea Dog
Sea Dog Chrome Plated Zinc Bow Eye . Die cast chrome zinc with galvanized shaft 3/8" dia. x 3 1/16"L. 5 1/8"L overall. 15/16" ID eye. Includes nut and washer. Imported. Model 079133-1.
Brand: Sea Dog
- Oblong Eye Plate
- Sailboat Hardware > Shackles > Snaps & Fittings > Eye Straps & Fairleads
- $5.79 - 5.99 USD
Sea Dog Oblong Eye Plate . Investment Cast 316 Stainless 3"L x 7/8"W 1/4" FH Fastenerss
Brand: Sea Dog
Suncor Backing Plate For Diamond Pad Eye . Diamond backing plate only, no eye included. Precision-cast 316 stainless steel Heavy-duty, one-piece precision casting No welds, backing plate only Size: 4" Hole to hole: 3" x 1.56" WLL: 3,000lb. ID: 1"
Brand: Suncor
- Copper Oval Sleeves
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $1.19 - 3.29 USD
West Marine Copper Oval Sleeves 5/32" Sleeves, Qty/pk . Used to make eyes in 7x19 wire rope. Zinc-plated copper.
Brand: West Marine
|
Sign In
