The West Advisor®
|
Harken Sailboat Travelers
Related searches:
Harken Big Boat Traveler Cars & Accessories Hi Load Single End Controls (pair), 1:1/2:1 Purchase, 2500lb. Swl, 6 7/16" Length . Big Boat Captive Ball Traveler Cars are built to handle high loads on boats from 32 to 50 ft., and up to 70ft. with coupled cars. The one-piece solid aluminum...
Brand: Harken
Harken Battcar Batten Traveler Systems, Components Slider With 10mm Stud . Batten Traveler Systems replace conventional sail slugs with ball bearing traveler cars to handle the compression loads from full-length battens. The main becomes easier to hoist and lower, and won t damage the sail...
Brand: Harken
Harken Mid Range Captive Ball Traveler Cars Windward Sheeting Car, Pivot Shackle, 260sq. Ft. Max. Mainsail, 1800lb. Swl . Recirculating ball-bearing travelers move freely under non-vertical loads and have a low-profile design. Captive balls allow easy installation. Built for high loads on...
Brand: Harken
Harken Battcar Batten Traveler Systems, Components Cb With 10mm Stud . For Boats 27' to 48' Batten Traveler Systems replace conventional sail slugs with ball bearing traveler cars to handle the compression loads from full-length battens. The main becomes easier to hoist and lower, and won t...
Brand: Harken
Harken Small Boat Windward Sheeting Traveler Cars Car, 125sq. Ft. Mainsail Size . A patented slider mechanism allows cars to be pulled to windward without releasing the leeward control line. Windward sheeting cars stay in place during tacks. Makes racing short-handed a lot more fun. Indicated...
Brand: Harken
Harken Midrange Traveler Track, Low Beam Metric Pinstop Holes Holes, 27mm X 3.6m . Accepts all Harken midrange cars. Holes on 100mm centers. Use 1/4" FHMS fasteners (sold separately). End stops, trim caps and splice link sold separately.
Brand: Harken
Harken Battcar Batten Traveler Systems, Aa Components Headboard Assembly . For Boats Under 35' Batten Traveler Systems replace conventional sail slugs with ball bearing traveler cars to handle the compression loads from full-length battens. The main becomes easier to hoist and lower, and won t...
Brand: Harken
Harken Small Boat Traveler Controls Doublesheave, No Cleat, 3:1/4:1 Purchase, 600lb. Swl . These end controls fit on all Harken Small Boat track. Low-profile, high-strength and lightweight, these can be used in 2:1, 3:1 or 4:1 purchase systems. Easy installation with the turn of a screw. Sold in...
Brand: Harken
Harken 27mm Midrange Cb Traveler Car, Standup Toggle 4:1, Mwl (lb.) 1800, Wt. (oz.) 13.5 . Midrange CB traveler cars are built to handle high loads on boats from 27' to 34'. One-piece solid aluminum construction. Ball bearings run on machined aluminum Hardkote-anodized races. Stainless steel...
Brand: Harken
Harken Small Boat Captive Ball (cb) Traveler Cars Hi Load With Pivoting Shackle/control Tangs, Torlon Bearings, 500lb. Swl . These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the...
Brand: Harken
Harken Midrange Traveler Track, High Beam Track/variable Hole Spacing Spacing, 27mmx2.5m . Accepts all Harken midrange cars. Holes on 100mm centers. Use 1/4" FHMS fasteners (sold separately). End stops, trim caps and splice link sold separately.
Brand: Harken
Harken 27mm Midrange Cb Traveler Car, Shackle 4:1, Mwl (lb.) 1800, Wt. (oz.) 11.04 . Midrange CB traveler cars are built to handle high loads on boats from 27' to 34'. One-piece solid aluminum construction. Ball bearings run on machined aluminum Hardkote-anodized races. Stainless steel wire...
Brand: Harken
Harken 27mm Midrange Cb Traveler Car, Standup Toggle, Mwl (lb.) 1800, Wt. (oz.) 13.6 . Midrange CB traveler cars are built to handle high loads on boats from 27' to 34'. One-piece solid aluminum construction. Ball bearings run on machined aluminum Hardkote-anodized races. Stainless steel wire...
Brand: Harken
Harken 27mm Midrange Cb Traveler Car, Shackle 3:1, Mwl (lb.) 1800, Wt. (oz.) 11.04 . Midrange CB traveler cars are built to handle high loads on boats from 27' to 34'. One-piece solid aluminum construction. Ball bearings run on machined aluminum Hardkote-anodized races. Stainless steel wire...
Brand: Harken
Harken Micro Captive Ball Traveler Cars, Track And Parts Hi 1m . Strong, lightweight, solid aluminum, one-piece cars boast stainless steel-wire ball guides that keep the high-strength Torlon balls captive when the car is off the track. Or flex the guides to pop out the balls and snap them back...
Brand: Harken
Harken Midrange Traveler Track & Accessories Cb Low Beam Track, 6' 10 11/16"l, 3 15/16 Hole Spacing . Midrange track is available in low-beam or high-beam configurations. Use low-beam track when it is supported at each fastener hole. Use high-beam track to span a cockpit or other unsupported...
Brand: Harken
Harken Small Boat Traveler Track & Accessories Pin Stop #2721 End . Accepts all Harken Small Boat cars. Use low-beam when track is supported at each fastener hole. High-beam can span unsupported areas. Holes on 100mm centers End stops sold separately
Brand: Harken
Harken End Cap Kit For Mid Range Traveler Cars Endcap Midrange (2) . Kit includes two endcaps, screws, blue loctite and instructions.
Brand: Harken
|
Sign In
