The West Advisor®
|
Mast & Standing Rigging Sailboat Hardware
- Rigging Insulators
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $264.99 - 274.99 USD
Navtec Rigging Insulators Insulator, 5/16in Wire Assembl . Insulators to protect wire terminals.
Brand: Navtec
Hayn Hi Mod Compression Forks Fork, 1/4" Wire X 7/16" Pin . These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. No sealant or packing needed, with special star-shaped crown rings...
Brand: Hayn
- Rig Tension Gauges
- Sailboat Hardware > Mast & Standing Rigging > Rigging Tools
- $74.79 - 219.99 USD
Loos & Company Rig Tension Gauges Pro Series For 1/4" 3/8" Wire Diameter . Make accurate and quick adjustments to wire rigging. Tension reads in pounds. Anodized aluminum. Professional model has heavy-duty spring, self-holding capability, and greater accuracy.
Brand: Loos & Company
Spartite Mast Wedge Replacement System Kit 1, 20' 40' Boat Size; 51cu.in. . Replace rubber mast wedges with pourable SpartiteSpartite is a mast wedge replacement system that properly supports the mast and seals the cavity between the mast and the partners. A one-piece custom-fitting mast chock...
Brand: Spartite
Hayn Hi Mod Compression Studs Stud, 1/2" Wire X 3/4" Thread . These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. No sealant or packing needed, with special star-shaped crown rings...
Brand: Hayn
Spinlock Deckware Mast Harness . Most comfortable and secure harness, and you can t fall out This harness is the first climbing harness specifically designed for marine use with enhancements for more comfort while aloft, including extra wide leg straps for preventing dead leg. Features a spike...
Brand: Spinlock
Schaefer Stainless Steel Toggles Double Jaw Toggle, 2 1/2" Interior Depth, 5/8" Pin Diameter . For use with marine eyes. Allows standing rigging to align with the tension in the rig. Double jaw style has an extra-deep slot for use with split masthead sheave boxes or chainplates. Eye-jaw design...
Brand: Schaefer
- Dinghy Mast Support
- Sailboat Hardware > Mast & Standing Rigging > Shroud Covers & Mast Boots
- $94.99 - 99.99 USD
Barton Marine Dinghy Mast Support . Tow your dinghy without mast damageSupports the aft end of dinghy mast when towing. Simply fits onto transom fittings and is instantly ready for use. Fully adjustable for different transom heights or pintle spacing (between 4 3/8" and 13 1/8" apart). Distance...
Brand: Barton Marine
Hayn Stainless Steel Turnbuckle Rigging Stud, 7/16" . All rigging studs are feature rich including open ended wrench flats to accommodate various wrench widths, "swageline" depth indicators, size identification, and cross drilled hole with reduced shank end. 7/16" wire size. 3/4-16 thread size....
Brand: Hayn
- Universal Mast Boot
- Sailboat Hardware > Mast & Standing Rigging > Shroud Covers & Mast Boots
- $29.99 - 35.99 USD
Sail Systems Universal Mast Boot Fits Masts With Circumferences Of 17 1/2" And Larger Corresponding Collars Up To 31" . Easily installed over stepped masts by slitting one side, trimming to fit, and gluing with adhesive supplied. Secure with stainless hose clamps. Flexible, UV-resistant plastic....
Brand: Sail Systems
- Mast Boot Tape
- Sailboat Hardware > Mast & Standing Rigging > Shroud Covers & Mast Boots
- $29.99 - 34.99 USD
West Marine Mast Boot Tape . Seal the mast boot with strong, waterproof tape 4"W x 40"L tape is self-bonding, water- and airtight, achieves a seal wet or dry and is not affected by saltwater. Easy to use no liner to remove. 40" roll seals the mast of a 40' boat.
Brand: West Marine
Hayn Short Rigging Adjuster, 1/4" Pin . Used where quick adjustment is required. Adjustment is done without the use of tools. Longer 14SA is calibrated for easy adjustment. Short Rigging Adjuster, 1/4" Pin. Wire size, 3/32". Jaw width, 5/16". Thread 1/4x28 RH.
Brand: Hayn
Suncor Rig Eye, Aircraft Type Eyes, Stainless Steel, 1/4" . Type 316 stainless. Used like marine eyes, but thinner across to fit in narrow forks. Wire: 1/4" Pin: 3/8" Pin: Head: 5/16"
Brand: Suncor
West Marine Stainless Steel Mast Steps . Polished stainless with a 5/8" thick teak pad instep grooved to prevent slipping.Size 11-1/4" x 5-1/8" Sold individually
Brand: West Marine
Suncor Rig Eye, Aircraft Type Eyes, Stainless Steel, 1/8" . Type 316 stainless. Used like marine eyes, but thinner across to fit in narrow forks. Wire: 1/8" Pin: 3/16" Pin: Head: 3/16"
Brand: Suncor
Suncor Rig Eye, Aircraft Type Eyes, Stainless Steel, 3/32" Swage . Type 316 stainless. Used like marine eyes, but thinner across to fit in narrow forks. Wire: 3/32" Pin: 3/16" Pin: Head: 1/8"
Brand: Suncor
Alps Wire Rope Compacted Rigging 1 X 7 Rigging, 3mm Dia., 2200lb. Breaking Strength . Control your rig and sail plan more accurately with a low-stretch, high-performance wire strand. Always in great demand, Compacted Rigging Wire is an essential performance requirement on many racing sailboats...
Brand: Alps Wire Rope
Alps Wire Rope 1 X 19 Stainless Steel Type 302/304 Wire, 1/4" Dia., 6900lb. Breaking Strength . Ideal for standing rigging applications. Stiff, one-strand cable made of 19 wires twisted together. Construction: 1 x 19 polished Best Use: Standing rigging, lifelines, architectural applications...
Brand: Alps Wire Rope
|
Sign In
