The West Advisor®
|
Moorings Mooring
Taylor Made Bridle Plate Mooring System Monohull With Safety Shackle . This mooring attachment system allows you to easily attach up to three lines from the mooring to your boat. The system maintains mooring line separation to minimize chafe and increase line life. No more tangled mooring lines!...
Brand: Taylor Made
Schaefer 12.5" Stainless Steel Deck Cleat . 12.5" Stainless-steel deck cleat. Hidden metric studs, 316 electropolished stainless-steel, smooth radius edges reduce line chafe, backing plate included. Maximum line size 1." 316 Stainless Steel Max Line Size: 1.0" (25 mm) Length: 12.5" (318 mm)...
Brand: Schaefer
- Pop Up Cleats
- Anchors > Docks & Moorings > Mooring Hardware > Mooring Cleats
- $192.99 - 244.99 USD
Taco Pop Up Cleats 5 1/4"l . Spring-loaded cleat pops up with the touch of a button and is corrosion-resistant stainless steel. Includes backing plate. Requires four 3/16" screws and nuts (sold separately).
Brand: Taco
Schaefer 10" Stainless Steel Deck Cleat . 10" Stainless-steel deck cleat. Hidden metric studs, 316 electropolished stainless-steel, smooth radius edges reduce line chafe, backing plate included. Maximum line size 3/4." 316 Stainless Steel Max Line Size: 3/4" (19 mm) Length: 10.0" (254 mm)...
Brand: Schaefer
Taco 316 Stainless Steel Flush Mount Cleats 6" (1) . 316 Stainless-Steel Flush-Mount Cleats
Brand: Taco
- 5.25" XCL Bow Chock
- Anchors > Docks & Moorings > Mooring Hardware > Chocks & Bitts
- $107.99 - 119.99 USD
Schaefer 5.25" Xcl Bow Chock . 5.25" Extra clean lead stainless-steel chock. Hidden stud fasteners, deep opening securely holds lines, smooth radius edges reduce chafe. Backing plates included. Maximum line size 3/4." 316 Stainless Steel Max Line Size: 3/4" (19 mm) Length: 5.25" (133 mm) Width:...
Brand: Schaefer
Taco Stainless Steel Folding Cleats 4 1/2" Cleat, 6 3/16" Overall Length, Recessed Screw Installation . 316 stainless-steel folding cleats with recessed screws do not require a cutout. Require two 5/16" machine screws (sold separately).
Brand: Taco
Attwood Stainless Steel Pop Up "neat Cleats" 4.5" neat Cleat . Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube...
Brand: Attwood
- 4" XCL Bow Chock
- Anchors > Docks & Moorings > Mooring Hardware > Chocks & Bitts
- $69.99 USD
Schaefer 4" Xcl Bow Chock . 4" Extra clean lead stainless-steel chock. Hidden stud fasteners, deep opening securely holds lines, smooth radius edges reduce chafe. Backing plates included. Maximum line size 5/8." 316 Stainless Steel Max Line Size: 5/8" (16 mm) Length: 4.0" (102 mm) Width: 1.0"...
Brand: Schaefer
Forespar 2" Mast Mount Pole Chock . For vertical pole mounting on the mast Molded from durable high-tech urethane, these chocks allow for stowing the pole vertically against the face of the mast. Off the deck and out of the way! Two mast-mount pole chocks 2 3 feet apart will help stop the pole...
Brand: Forespar
Suncor 10" Stainless Steel Herreschoff Cleat . Precision Cast 316 Stainless Steel Overall length 10" Hole to hole dimensions 3.63" x 1.75" Requires 1/4" fasteners (not included) Imported
Brand: Suncor
- Rope Deck Pipe
- Anchors > Docks & Moorings > Mooring Hardware > Chain & Rode Pipes
- $28.99 USD
Suncor Rope Deck Pipe . Accepts up to 3/4" line. Material: Chrome-plated brass Flange: 4"Dia. I.D.: 1.75"Dia. Fastener Size Required: Four #10 FHMS
Brand: Suncor
- Bow Chocks
- Anchors > Docks & Moorings > Mooring Hardware > Chocks & Bitts
- $22.99 - 24.99 USD
Suncor Bow Chocks 6"l X 0.98"w (pair), 4.78" Hole To Hole, Requires 2 1/4" Fasteners . Precision-cast 316 stainless-steel bow chock. Edges are polished and rounded to prevent chafe Sold in pairs (port and starboard)
Brand: Suncor
- Hinged Rope Deck Pipe
- Anchors > Docks & Moorings > Mooring Hardware > Chain & Rode Pipes
- $19.99 - 21.99 USD
Suncor Hinged Rope Deck Pipe . Hinged cover. Accepts line up to 1/2". Material: Chrome-plated brass Flange: 2-3/4"Dia. I.D.: 1.5"Dia. Fastener Size Required: Four #10 FHMS
Brand: Suncor
Taylor Made Sur Moor T3c Mooring Collars 2 1/2'' Dia. Collar, Fits 18" & 24" Buoys . Hot-dip galvanized-steel collar protects the T3C buoy from anchor chain wear, prolonging the life of the buoy. Works with standard anchor shackles.
Brand: Taylor Made
- Trimline Cleats
- Anchors > Docks & Moorings > Mooring Hardware > Mooring Cleats
- $11.99 - 19.99 USD
Suncor Trimline Cleats 4inch . Trimline Cleat 316 Stainless Steel - Precision Cast 4" Overall length Base hole to hole: 1.33" x 0.8" Requires four 1/8 fasteners, not included. Imported
Brand: Suncor
- Bronze Cleats
- Anchors > Docks & Moorings > Mooring Hardware > Mooring Cleats
- $6.99 - 7.79 USD
West Marine Bronze Cleats Closed Base Cleat, Bronze, 3", #8 Fasteners . We recommend stainless or bronze cleats for use in fresh or salt water. Zinc and Zamak cleats should be used in fresh water only. We stock a complete selection of cleats for anchoring, docking and general-purpose...
Brand: West Marine
Sea Dog 6 1/2" Black Nylon Open Base Cleat . Injection molded black nylon 6 1/2" overall length 1-3/8" high 1-11/16" hole to hole 2-15/16" base length Requires two # 12 fasteners
Brand: Sea Dog
|
Sign In
