The West Advisor®
|
Navtec Sailboat, Sailboat Hardware NAVTEC
Navtec Integral Hydraulic Backstay Adjusters Adjuster, 1/2" Piston Size, 5400 Max. Force At Std. Relief Valve Setting, 9/32" 1x19 Wire Pin Dia, 44.3" Length Open, 30.8" Closed, 13.5" Stroke . Self-contained hydraulic adjusters feature a longer pump handle that produces a faster pumping motion...
Brand: Navtec
- Rigging Insulators
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $264.99 - 274.99 USD
Navtec Rigging Insulators Insulator, 5/16in Wire Assembl . Insulators to protect wire terminals.
Brand: Navtec
Navtec Norseman Swageless Fork Terminals Terminal, 1/4" Wire Dia., 1/2" Eye Id Pin Size, 5/8" Length . Norseman Swageless Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special...
Brand: Navtec
- Stud Terminals
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $41.99 - 114.99 USD
Navtec Stud Terminals Terminal, 5/16" Wire Diam., 1/2" Thread Size, 3 15/16" Length . Norseman Swageless Stud Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and can...
Brand: Navtec
Navtec Norseman Swageless Eye Terminals Terminal, 3/16" Wire Dia., 3/8" Id Pin Size, 1/8" Length . May be hand fitted without the use of special tools. Simply slip the body of the terminal over the full diameter of the cable. Unlay the outer wires and fit the cone over the center core. Re-lay...
Brand: Navtec
Navtec Extra Long Stud Terminals Terminal, 1/4" Wire Diam., 1/2" Thread Size, 7 Length . Norseman Swageless Stud Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and...
Brand: Navtec
Navtec Replacement Turnbuckle Screws Standard Screw, 7/16" . These replacement screws fit C500 turnbuckles. Available in standard or extra long length Nickel-plated bronze
Brand: Navtec
- Stemball Fittings
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $7.29 - 54.99 USD
Navtec Stemball Fittings Swage, 5/16in . Electro-polished 316 stainless steel.
Brand: Navtec
Navtec Backstay Handle Holder . Holds backstay adjuster handle close to the mounting surface for easy accessibility and to prevent accidental pumping, line fouling and injury. Accepts Navtec System 50 and System VII pump handles; will not accept titanium two-speed pump handles.
Brand: Navtec
Navtec Hf 8, Jaw Terminal For Rod . Used as upper and lower terminals on rod backstays. Also used on low-fatigue assemblies like bobstays.
Brand: Navtec
- Cones for 1x19 Wire
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $5.49 - 15.49 USD
Navtec Cones For 1x19 Wire Cone, 5/16" Diameter . Cones for 1x19 wire (cones for 7-Strand and Dyform available only through Special Order).
Brand: Navtec
- Cupples
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $3.19 - 3.79 USD
Navtec Cupples Stainless Steel Cupple, 1/8" To 5/32" Wire Diameter . Navtec cupples for Norseman Rigging Terminals. Norseman Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without...
Brand: Navtec
|
Sign In
