Navtec Sailboat Fittings

• Norseman Swageless Fork Terminals
• Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
• $62.99 - 134.99 USD

Navtec Norseman Swageless Fork Terminals Terminal, 1/4" Wire Dia., 1/2" Eye Id Pin Size, 5/8" Length . Norseman Swageless Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special...

• Stud Terminals
• Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
• $41.99 - 114.99 USD

Navtec Stud Terminals Terminal, 3/16" Wire Diam., 5/16" Thread Size, 2 7/8" Length . Norseman Swageless Stud Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and can...

• Norseman Swageless Eye Terminals
• Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
• $33.99 - 99.99 USD

Navtec Norseman Swageless Eye Terminals Terminal, 9/32" Wire Dia., 1/2" Id Pin Size, 3/16" Length . May be hand fitted without the use of special tools. Simply slip the body of the terminal over the full diameter of the cable. Unlay the outer wires and fit the cone over the center core. Re-lay...

• Extra Long Stud Terminals
• Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
• $54.99 - 97.99 USD

Navtec Extra Long Stud Terminals Terminal, 1/4" Wire Diam., 1/2" Thread Size, 7 Length . Norseman Swageless Stud Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and...

• Replacement Turnbuckle Screws
• Sailboat Hardware > Mast & Standing Rigging > Turnbuckles & Toggles
• $32.99 - 87.99 USD

Navtec Replacement Turnbuckle Screws Standard Screw, 7/16" . These replacement screws fit C500 turnbuckles. Available in standard or extra long length Nickel-plated bronze

• Stemball Fittings
• Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
• $7.29 - 54.99 USD

Navtec Stemball Fittings Swage, 5/16in . Electro-polished 316 stainless steel.

• Cupples
• Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
• $3.19 - 3.79 USD

Navtec Cupples Stainless Steel Cupple, 1/8" To 5/32" Wire Diameter . Navtec cupples for Norseman Rigging Terminals. Norseman Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without...