The West Advisor®
|
Nut Sailboat Hardware
Hayn Hi Mod Failsafe Insulators Insulator, Compression End, 7/32" Wire . The Failsafe Insulator, with features similar to the other Hi-Mod fittings, uses an internal ball socket in the main body which threads onto the connecting stud. The nut is insulated by a Tufnol socket, isolating the...
Brand: Hayn
C.sherman Johnson Turnbuckle, Jaw & Swage Hand Crimp 3/16" Wire, 3" Adj. Range, 1/4 28 Thread, Body . Exclusively for lifeline applications. 1/4" pin dia. Lock nuts prevent loosening. Open body (O), and Tubular (T) styles.*Open body style with cotter pins, not lock nuts.
Brand: C.sherman Johnson
- Wheel Nuts
- Sailboat Hardware > Sailboat Steering > Rudder Hardware
- $37.99 - 75.99 USD
Edson Marine Wheel Nuts Standard 3/4" . Necessary to fix a destroyer wheel on your existing wheel shaft. Standard model is a polished stainless hexagonal nut. Quick Release model is a 2" dia. cast stainless knurled knob, which can be removed by hand. Fit Edson standard shafts (1"-14), except...
Brand: Edson Marine
- Eye Nuts
- Sailboat Hardware > Shackles > Snaps & Fittings > Eyebolts & U Bolts
- $14.44 - 67.99 USD
Wichard Eye Nuts 3/8" Stock Dia. Nut, 7/8" Hole Dia., 16 Thread 10,650lb. Breaking Load . Drop-forged from 316L stainless steel for greater strength and safety. ShWt .1
Brand: Wichard
- Stay Adjusters
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $19.99 - 43.99 USD
C.sherman Johnson Stay Adjusters Adjuster, 3/32" Wire Dia., 3/16" Pin Adj. Range, 1000lb. Breaking Strength . Knurled nut permits precise, one-handed adjustment. Terminal rod is captive, so it cannot come apart even when fully extended. Jaw and clevis pin at one end; swage stud at the other....
Brand: C.sherman Johnson
C.sherman Johnson Turnbuckle, Eye And Swage Machine 3/16" Wire, 3" Adj. Range, 1/4 28 Thread . Exclusively for lifeline applications. 1/4" pin dia. Lock nuts prevent loosening.
Brand: C.sherman Johnson
C.sherman Johnson Long Lifeline Adjusters And Parts Spare Adjuster, Stud Only, 10 32 X 3" Thread Size . Extra-long for wider range of adjustment. Knurled adjustment knob with lock nut. Clevis pin with ring.
Brand: C.sherman Johnson
Suncor Marine Tubular Turnbuckles Toggle & Toggle, 1/4" Pin Dia. . No need for unsightly turnbuckle boots or messy rigging tape. Locking hex nuts replace sharp cotter pins on these streamlined all stainless steel turnbuckles. An integral toggle jaw maintains rigging alignment. Professional...
Brand: Suncor
- Lifeline Adjusters
- Sailboat Hardware > Lifelines & Terminals > Lifeline Terminals
- $13.99 - 24.99 USD
C.sherman Johnson Lifeline Adjusters Machine Swage Adjuster, 1/8" Wire, 7/8" Adj. Range, 1/4 28lh Thread . Take up slack at a gate, or at the end of a long run. Knurled adjustment knob with lock nut.
Brand: C.sherman Johnson
C.sherman Johnson Terminal Locking Nuts Nut, 1/4 28 Lh Thread . For check nut locking turnbuckles. Sold in pairs.
Brand: C.sherman Johnson
- Bow/Stern Eyes
- Sailboat Hardware > Shackles > Snaps & Fittings > Eyebolts & U Bolts
- $10.99 - 11.49 USD
Suncor Bow/stern Eyes 3/8" Eye, 1.03" Id Between Studs X Thread Length . 304 Stainless Steel - Formed Each U-Bolt set includes four nuts (two standard and two beveled) Includes one bow plate, and one stern plate Threads are "UNC"
Brand: Suncor
Sea Dog Stainless Steel Bow Eye . Sea-Dog Bow Eyes come with adjustable finished nuts as compared to the crimped ring used on most other bow eyes. The 3/8" and 7/16" shafts have rolled threads; the 1/2" and 5/8" stock have cut threads. All parts are made of stainless steel. Plate sizes:...
Brand: Sea Dog
- Bow Eye
- Sailboat Hardware > Shackles > Snaps & Fittings > Eyebolts & U Bolts
- $9.99 USD
Sea Dog Bow Eye . Chrome-plated zinc eye. Zinc-plated steel bolts, nuts and washers. Shank length: 3'' Stock diameter: 3/8'' Eye: 1'' SWL: 2000
Brand: Sea Dog
- Wing Nuts
- Sailboat Hardware > Sailboat Steering > Rudder Hardware
- $6.49 - 8.29 USD
Sea Sure Wing Nuts Stainless Steel Nut, M8 . The wing nuts manufactured from either 316 stainless steel or black nylon for ease of tightening up the blade pivot bolt.
Brand: Sea Sure
- Bow Eye
- Sailboat Hardware > Shackles > Snaps & Fittings > Eyebolts & U Bolts
- $6.99 - 7.49 USD
Sea Dog Bow Eye . Chrome-plated eye. Zinc-plated steel bolts, nuts and washers. Shank length: 4-5/8". Stock dia.: 3/8". Eye: 15/16".
Brand: Sea Dog
Sea Dog Chrome Plated Zinc Bow Eye . Die cast chrome zinc with galvanized shaft 3/8" dia. x 3 1/16"L. 5 1/8"L overall. 15/16" ID eye. Includes nut and washer. Imported. Model 079133-1.
Brand: Sea Dog
- Ball Ends
- Sailboat Hardware > Lifelines & Terminals > Lifeline Terminals
- $3.99 USD
C.sherman Johnson Ball Ends . The capped acorn nut, solid button and ball end secure terminal ends, leaving no exposed threads or rough edges (supplied with turnbuckles). 1/4"-28 Thread Size x 5/8" OD.
Brand: C.sherman Johnson
Hayn Stainless Steel Hex Nut, 1/4 28 Unf Rh Thread Size . Hex Nuts made from 18-8 grade stainless steel in sizes ranging from #10 - 1.0" diameter in right and left hand UNF thread.
Brand: Hayn
|
Sign In
