The West Advisor®
|
Primers & Undercoats
Awlgrip Gray Awlcoat Tpc Primer . Awlcoat TPC, temporary Peelable coating, protects surfaces from damage or contamination. Water based Tuff film guards against: scuffing abrasion contamination acid rain fly rust sand dust
Brand: Awlgrip
Blue Water Marine Paint Ac 1 Primer (commercial/industrial Only) Primer, Ga. . A surface tolerant, one part anticorrosive. Tar free anticorrosive for use on underwater areas. Suitable primer for etched aluminum and blasted steel. Use as sealer coat over aged antifoulings prior to application of...
Brand: Blue Water Marine Paint
Sterling 94u 1000 Low Voc Primer Gallon . Part of Sterling's Linear Polyurethane SystemUnlike U-1000, its predecessor, this white primer is higher in solids, covers better, requires fewer coats and shrinks less. Best primer for brush application. Finish sand with 220 grit for a fine topcoat...
Brand: Sterling
Blue Water Marine Paint Rusty Metal Primer (commercial/industrial Only) Primer, Ga. . Apply over rusty steel, clean, galvanized, zinc, aluminum or painted surfaces. Locks rust in place. Can be over-coated with Marine Alkyd 50 or Marine Urethane finishes. Commercial/Industrial Only
Brand: Blue Water Marine Paint
Blue Water Marine Paint Ac80 Commercial Pure Epoxy Anticorrosive Primer Kit, White, 5 Gal . Marine AC 80 - Pure Epoxy A surface tolerant, two part 80% solids pure epoxy anticorrosive primer. Epoxy anticorrosive coating for use on the entire vessel: Underwater, topside, deck, house, water ballast...
Brand: Blue Water Marine Paint
Sterling U 1000 White Primer Quart . For fiberglass and existing paint. Mix U-1000 in a 2:1 ratio with U-1000C catalyst for brush or spray application. To brush, thin with U-2965. To spray, thin with either U-1014 or U-1385. Finish sand with 220 grit for a fine topcoat finish. A mixed quart...
Brand: Sterling
Awlgrip High Build Epoxy Primer (professional Application Only) Yellow Base, Gallon . For pinholes, small depressions and sanding prep. Covers 200 sq. ft./gal. Recoat in 8 hours. Spray only.
Brand: Awlgrip
Awlgrip 545 Anti Corrosive Epoxy Primer, (professional Application Only) Gray, Quart, . For steel, aluminum, wood or fiberglass. Spray, brush, roll on. Covers up to 497 sq. ft./gal. Recoat in 12 hours. NOTE: Awlgrip is intended for professional application only and is not available for sale to...
Brand: Awlgrip
Awlgrip Hullgard Expoxy Primer, Buff . Hullgard Epoxy Primer is a holding primer that combines excellent anticorrosion and water barrier properties with anti-fouling tie-coat functionality. Suitable for below the waterline only, it offers a long overcoating interval without sanding to reduce...
Brand: Awlgrip
Sterling High Build Yellow Primer, Quart . Part of Sterling's Linear Polyurethane SystemCorrosion-resistant, for heavy aluminum plate and blasted steel. Can be top-coated after 220-grit sanding. Mix 1:1 with U-4748 catalyst and thin as needed with U-1289. Roller or spray application builds to...
Brand: Sterling
Interlux Brightside Pre Kote Primer Gray, Quart . Fills minor blemishes and sands easilyOne part primer for use with Brightside or any other one-part topside enamel. Microspheres provide high build and improved sandability. (Replaces Brightside Primer and 279 White Undercoater.) Application:...
Brand: Interlux
Pettit Paints 6980 Rustlok Steel Primer Quart . Easy-to-apply, effective, anti-corrosive barrierOne-part, moisture-cured polyurethane coating locks in and stops the spread of rust on steel, galvanized and stainless steel and cast iron. Forms a dense, waterproof barrier for maximum corrosion...
Brand: Pettit Paints
Pettit Paints Vivid White Primer, Gal. . Ideal for use under Vivid bright colored antifouling paint and formulated to reduce water absorption in fiberglass hulls and prevent osmotic blistering. It creates a high film build for maximum protection with fewer coats and also provides exceptional...
Brand: Pettit Paints
Pettit Paints 6149 Easypoxy White Undercoater Undercoater, Quart . Use to fill small surface blemishes and imperfectionsUse as a base coat for Easypoxy enamels when the surface is less than smooth. Can be applied to fiberglass, wood and previously painted surfaces. Dries quickly. Easy to sand....
Brand: Pettit Paints
Awlgrip Hullgard Extra Epoxy Primer . Hullgard Extra Epoxy Primer is a holding primer, used as a base for subsequent fairing. It offers superb adhesion to properly prepared fiberglass, steel, aluminum and wood. For use above and below the waterline.
Brand: Awlgrip
Pettit Paints 6627 Tie Coat Primer Quart Kit . Ties topcoat to undercoat, regardless of compatibilityGeneral purpose chlorinated rubber used as a primer on metal surfaces and as a tie coat between different types of coatings. Can be used above or below the waterline. Compatible with all...
Brand: Pettit Paints
Pettit Paints Skip Sand Primer, Qt . Recommended for use over vinylester and other blister-resistant gelcoats where sanding is forbidden, this primer eliminates the need to sand prior to application of antifouling paint. It may also be used over conventional gelcoats and as a tie-coat between...
Brand: Pettit Paints
- No Sand Primer
- Maintenance > Paint & Solvents > Primers & Undercoats
- $33.99 - 36.99 USD
Interlux No Sand Primer . Speeds up the prepping process prior to application of antifouling paint Eliminates the need to sand fiberglass boats before painting by creating a chemical bond between the fiberglass surface and the first coat of antifouling paint. Quart. Primary Usage: Underwater,...
Brand: Interlux
|
Sign In
