Rigging Terminals Stud

• Hi MOD Failsafe Insulators
• Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
• $187.99 - 519.00 USD

Hayn Hi Mod Failsafe Insulators Insulator, Compression End, 7/32" Wire . The Failsafe Insulator, with features similar to the other Hi-Mod fittings, uses an internal ball socket in the main body which threads onto the connecting stud. The nut is insulated by a Tufnol socket, isolating the...

• Hi MOD Compression Studs
• Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
• $18.66 - 197.99 USD

Hayn Hi Mod Compression Studs Stud, 1/2" Wire X 3/4" Thread . These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. No sealant or packing needed, with special star-shaped crown rings...

• Stud Terminals
• Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
• $41.99 - 114.99 USD

Navtec Stud Terminals Terminal, 3/16" Wire Diam., 5/16" Thread Size, 2 7/8" Length . Norseman Swageless Stud Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and can...

• Extra Long Stud Terminals
• Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
• $54.99 - 97.99 USD

Navtec Extra Long Stud Terminals Terminal, 1/4" Wire Diam., 1/2" Thread Size, 7 Length . Norseman Swageless Stud Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and...

• Swage Studs
• Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
• $4.88 - 89.99 USD

C.sherman Johnson Swage Studs Stud, 5/16" Wire Size, 1/2 20rh Thread . The wire end of the turnbuckle generally uses right hand (RH) threads, and the deck end uses left hand (LH) threads. Note that there are two dimensions: The wire diameter and the thread size.

• Hi Mod Compression Stud, 5/16" x 5/8" Thread
• Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
• $29.66 - 84.99 USD

Hayn Hi Mod Compression Stud, 5/16" X 5/8" Thread . Produced by Petersen Stainless Rigging in the UK and distributed exclusively by Hayn Marine in the USA, the Hi-MOD mechanical terminal is the latest advancement in swageless fittings. These terminals have a unique crown ring that assures the...

• Hi Mod Compression Stud, 9/32" x 1/2" Thread
• Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
• $38.88 - 62.99 USD

Hayn Hi Mod Compression Stud, 9/32" X 1/2" Thread . Produced by Petersen Stainless Rigging in the UK and distributed exclusively by Hayn Marine in the USA, the Hi-MOD mechanical terminal is the latest advancement in swageless fittings. These terminals have a unique crown ring that assures the...

• Stay Adjusters
• Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
• $19.99 - 43.99 USD

C.sherman Johnson Stay Adjusters Adjuster, 1/8" Wire Dia., 1/4" Pin 2 Adj. Range, 3000lb. Breaking Strength . Knurled nut permits precise, one-handed adjustment. Terminal rod is captive, so it cannot come apart even when fully extended. Jaw and clevis pin at one end; swage stud at the other....

• Lifeline Studs
• Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
• $6.29 - 15.49 USD

Hayn Lifeline Studs Stud, 1/8" Wire, 10 32 X 3/4" Thread, Lh . CNC-machined from 316-grade stainless steel. Important Note: 1/4" Lifeline fittings use 7/32" dies.

• Stainless Steel Terminating Stud, 1/8 " Wire Size
• Sailboat Hardware > Mast & Standing Rigging > Rigging Tools
• $5.29 - 5.79 USD

Hayn Stainless Steel Terminating Stud, 1/8 " Wire Size . Terminating stud for cost effective cable tensioning system utilizes high quality closed turnbuckle assemblies. Tensioning is accomplished by the Termination Stud cap or top pulling against the end verticals/posts in the run. This system...