Rigging Terminals Turnbuckle

• Swage Studs
• Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
• $4.88 - 89.99 USD

C.sherman Johnson Swage Studs Stud, 1/8" Wire Size, 1/4 28lh Thread . The wire end of the turnbuckle generally uses right hand (RH) threads, and the deck end uses left hand (LH) threads. Note that there are two dimensions: The wire diameter and the thread size.

• Tubular Body, Stainless Steel Turnbuckles
• Sailboat Hardware > Mast & Standing Rigging > Turnbuckles & Toggles
• $22.99 - 79.99 USD

C.sherman Johnson Tubular Body, Stainless Steel Turnbuckles Jaw & Swage, 1/4" Wire, 3/8 24 Thread, 3/8" Pin Dia., 7000lb. Tens. Strength, Adj. . Series 03 and 04 include LH upper terminals (unless designated RH). All other series are RH. Positive locking style has captive lock rings All others...

• Marine Swage Eyes
• Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
• $7.79 - 34.81 USD

Ronstan Marine Swage Eyes Eye, 3/16" Wire, 3/8" Dia. . Used to connect wire to fittings with clevis pins, like mast terminals, forks, double jaw turnbuckles, etc. Type 316 stainless. Marine eyes are heavier and stronger than aircraft eyes.

• T Style Turnbuckle Jaw
• Sailboat Hardware > Lifelines & Terminals > Lifeline Terminals
• $12.99 - 19.99 USD

C.sherman Johnson T Style Turnbuckle Jaw Jaw, 5/16" 24 Rh Thread Size . All toggle jaws can be used for life line and rigging applications. Deck Toggles are used for lifeline and architectural applications only. Use for lifeline or rigging applications.

• Stainless Steel Terminating Stud, 1/8 " Wire Size
• Sailboat Hardware > Mast & Standing Rigging > Rigging Tools
• $5.29 - 5.79 USD

Hayn Stainless Steel Terminating Stud, 1/8 " Wire Size . Terminating stud for cost effective cable tensioning system utilizes high quality closed turnbuckle assemblies. Tensioning is accomplished by the Termination Stud cap or top pulling against the end verticals/posts in the run. This system...