Sailboat Hardware Caps

• Midrange Traveler Track, Low Beam Track, Metric Pinstop Holes
• Sailboat Hardware > Travelers > Tracks & Vangs > T Track & Sail Track
• $55.49 - 415.80 USD

Harken Midrange Traveler Track, Low Beam Metric Pinstop Holes Holes, 27mm X 3.6m . Accepts all Harken midrange cars. Holes on 100mm centers. Use 1/4" FHMS fasteners (sold separately). End stops, trim caps and splice link sold separately.

• Midrange Traveler Track, High Beam Track/Variable Hole Spacing
• Sailboat Hardware > Travelers > Tracks & Vangs > T Track & Sail Track
• $99.49 - 218.06 USD

Harken Midrange Traveler Track, High Beam Track/variable Hole Spacing Spacing, 27mmx2.5m . Accepts all Harken midrange cars. Holes on 100mm centers. Use 1/4" FHMS fasteners (sold separately). End stops, trim caps and splice link sold separately.

• Opti Buoyancy Bag
• Sailboat Hardware > Sailboat Canvas & Leather > Buoyancy Bags
• $49.99 - 57.99 USD

Holt Opti Buoyancy Bag . Holt bouyancy bags are made of tough, heavy-duty, 0.16" PVC shaped and finished to fit snug in your dinghy. Features flexible screw cap and nozzle with slow return valve to aid inflation.

• Big Boat Track End Stops
• Sailboat Hardware > Travelers > Tracks & Vangs > Mainsheet Traveler
• $12.49 - 47.17 USD

Harken Big Boat Track End Stops Stop, Low Beam . Endstops/Trim Caps: When end controls are not used, add endstops to absorb shock loads. When end control assemblies are used, trim caps finish track ends. Sold in pairs. Fasteners not included.

• Clevis Slide Top Cap Unit
• Sailboat Hardware > Lifelines & Terminals > Stanchions
• $16.99 USD

Sea Dog Clevis Slide Top Cap Unit . Investment Cast 316 Stainless 1" Tube OD 1/4" Pin size

• 150 Cam Matic Rebuild Kit
• Sailboat Hardware > Cleats & Stoppers > Cam & Clam Cleats
• $12.99 - 13.99 USD

Harken 150 Cam Matic Rebuild Kit . Rebuild Kit for Cam-Matic Cam Cleat includes cam replacement springs, ball bearings, base plate, top caps and instructions. Note: Cam cleats built before 1993 have different baseplates. Cam caps and cam bases will not fit. Replace only balls, torsion springs...

• Stanchion Cap
• Sailboat Hardware > Lifelines & Terminals > Stanchions
• $8.49 USD

Sea Dog Stanchion Cap . Investment Cast 316 Stainless Stanchion Cap 1" Tube OD 5/16" Eye Diameter

• Stainless Steel Terminating Stud, 1/8 " Wire Size
• Sailboat Hardware > Mast & Standing Rigging > Rigging Tools
• $5.29 - 5.79 USD

Hayn Stainless Steel Terminating Stud, 1/8 " Wire Size . Terminating stud for cost effective cable tensioning system utilizes high quality closed turnbuckle assemblies. Tensioning is accomplished by the Termination Stud cap or top pulling against the end verticals/posts in the run. This system...

• Ball Ends
• Sailboat Hardware > Lifelines & Terminals > Lifeline Terminals
• $3.99 USD

C.sherman Johnson Ball Ends . The capped acorn nut, solid button and ball end secure terminal ends, leaving no exposed threads or rough edges (supplied with turnbuckles). 1/4"-28 Thread Size x 5/8" OD.

• Plastic Cam Set
• Sailboat Hardware > Mast & Standing Rigging > Rigging Tools
• $2.89 USD

Harken Plastic Cam Set . Plastic base, caps, and washers for Harken Cam 150.