The West Advisor®
|
Sailboat Hardware Mast & Standing Rigging
- Rod Tension Gauges
- Sailboat Hardware > Mast & Standing Rigging > Rigging Tools
- $419.99 - 469.99 USD
Loos & Company Rod Tension Gauges For 12 To 22 Sizes . Allows accurate and quick adjustment to solid rod rigging. Tension is read in pounds. Calibrated to measure up to 25% of the rod s breaking strength. Anodized aluminum with a heavy-duty spring and self-holding capability.
Brand: Loos & Company
Hayn Hi Mod Compression Splice Links Link, 1/8" Wire . These slim new Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. No sealant or packing needed, with special star-shaped crown rings...
Brand: Hayn
Hayn Hi Mod Compression Toggles Toggle, 5/16" Wire X 9/16" Pin . These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. No sealant or packing needed, with special star-shaped crown...
Brand: Hayn
- Rig Tension Gauges
- Sailboat Hardware > Mast & Standing Rigging > Rigging Tools
- $74.79 - 219.99 USD
Loos & Company Rig Tension Gauges Pro Series For 1/4" 3/8" Wire Diameter . Make accurate and quick adjustments to wire rigging. Tension reads in pounds. Anodized aluminum. Professional model has heavy-duty spring, self-holding capability, and greater accuracy.
Brand: Loos & Company
Spartite Mast Wedge Replacement System Kit 1, 20' 40' Boat Size; 51cu.in. . Replace rubber mast wedges with pourable SpartiteSpartite is a mast wedge replacement system that properly supports the mast and seals the cavity between the mast and the partners. A one-piece custom-fitting mast chock...
Brand: Spartite
Hayn Hi Mod Compression Eyes Eye, 3/16" Wire X 3/8" Pin . These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. No sealant or packing needed, with special star-shaped crown rings...
Brand: Hayn
Navtec Norseman Swageless Fork Terminals Terminal, 1/4" Wire Dia., 1/2" Eye Id Pin Size, 5/8" Length . Norseman Swageless Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special...
Brand: Navtec
- Stud Terminals
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $41.99 - 114.99 USD
Navtec Stud Terminals Terminal, 3/16" Wire Diam., 5/16" Thread Size, 2 7/8" Length . Norseman Swageless Stud Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and can...
Brand: Navtec
Navtec Extra Long Stud Terminals Terminal, 1/4" Wire Diam., 1/2" Thread Size, 7 Length . Norseman Swageless Stud Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and...
Brand: Navtec
- Triangle Plates
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $24.99 - 87.99 USD
Schaefer Triangle Plates Plates, 3/8" Pin Dia., 2 3/4" Width . Create your own adjustment system on any split backstay rig. Plates are Type 304 stainless steel, and come in pairs with three clevis and cotter pins. Additional sizes available through Special Order.
Brand: Schaefer
Ronstan Sealoc Turnbuckle Handle Kit . Optimize rig tension in any conditions, anytime to improve sailing efficiency. This easy-to-use, snag-proof system is designed for high performance sailboats, small keel boats and trailer boats. The black, UV-resistant acetal upper handle, fluted for a...
Brand: Ronstan
- Marine Swage Eyes
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $7.79 - 34.81 USD
Ronstan Marine Swage Eyes Eye, 3/16" Wire, 3/8" Dia. . Used to connect wire to fittings with clevis pins, like mast terminals, forks, double jaw turnbuckles, etc. Type 316 stainless. Marine eyes are heavier and stronger than aircraft eyes.
Brand: Ronstan
Ronstan Stainless Sailmakers Thimbles Thimble, 1/8"dia. Wire/line, 11/32" Inside Width . Sailmakers thimbles are completely enclosed and should be used anywhere a thimble is needed on running rigging to prevent chafe on the lines.
Brand: Ronstan
Loos & Company 1 X 19 Brite Stay Stainless Wire, Type 316 7/32" Dia., 5350lb. Breaking Strength . Marine Wire Rope The unique chemistry of this top-quality rigging cable has been developed and perfected for sailboat applications. Each strand is preformed and polished to eliminate wire s tendency...
Brand: Loos & Company
Alps Wire Rope 1 X 19 Brite Stay Type 316 Stainless Steel Wire, 7/32" Dia., 5350lb. Breaking Strength . Marine Wire Rope The unique chemistry of this top-quality rigging cable has been developed and perfected for sailboat applications. Each strand is preformed and polished to eliminate wire s...
Brand: Alps Wire Rope
Loos & Company 1 X 19 Brite Stay Stainless Wire, Type 302/304 3/16" Dia., 4700lb. Breaking Strength . Marine Wire Rope The unique chemistry of this top-quality rigging cable has been developed and perfected for sailboat applications. Each strand is preformed and polished to eliminate wire s...
Brand: Loos & Company
- Cupples
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $3.19 - 3.79 USD
Navtec Cupples Stainless Steel Cupple, 1/8" To 5/32" Wire Diameter . Navtec cupples for Norseman Rigging Terminals. Norseman Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without...
Brand: Navtec
Loos & Company 7 X 19 Flexible Wire Wire, 7/32" Dia., 5000lb. Breaking Strength . Marine Wire Rope The unique chemistry of this top-quality rigging cable has been developed and perfected for sailboat applications. Each strand is preformed and polished to eliminate wire s tendency to collect...
Brand: Loos & Company
|
Sign In
