The West Advisor®
|
Sailboat Hardware Terminal
Hayn Hi Mod Compression Splice Links Link, 1/8" Wire . These slim new Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. No sealant or packing needed, with special star-shaped crown rings...
Brand: Hayn
Hayn Hi Mod Compression Eyes Eye, 1/4" Wire X 7/16" Pin . These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. No sealant or packing needed, with special star-shaped crown rings...
Brand: Hayn
Suncor Quick Attach Stud Swage Fitting Stud, 1/4" Wire Size, 1/2" Left Hand Unf Thread . The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the...
Brand: Suncor
Navtec Norseman Swageless Eye Terminals Terminal, 3/16" Wire Dia., 3/8" Id Pin Size, 1/8" Length . May be hand fitted without the use of special tools. Simply slip the body of the terminal over the full diameter of the cable. Unlay the outer wires and fit the cone over the center core. Re-lay...
Brand: Navtec
- Stanchions
- Sailboat Hardware > Lifelines & Terminals > Stanchions
- $62.99 - 99.99 USD
Schaefer Stanchions 24"l Stanchion, Fits Boats 26' 31', Two Wire Holes . Heavy-duty 1'' stainless stanchion tubes have integral top caps and accept coated lifeline wire up to 5/16'' diameter. Rugged stainless base is canted 5 inboard to match most deck cambers 5/16'' welded rod reinforcement...
Brand: Schaefer
Navtec Extra Long Stud Terminals Terminal, 1/4" Wire Diam., 1/2" Thread Size, 7 Length . Norseman Swageless Stud Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and...
Brand: Navtec
Schaefer Stanchion Base & Brace Backing Plate . Heavy-duty 1" stainless stanchion tubes have integral top caps and accept coated lifeline wire up to 5/16" oval dia. Rugged stainless base is canted 5 inboard to match most deck cambers. 5/16" welded rod reinforcement doubles as a bail for snatch...
Brand: Schaefer
- Aircraft Swage Eyes
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $64.99 - 87.99 USD
C.sherman Johnson Aircraft Swage Eyes Eye, 5/16" Wire Size, 7/16" Dia. . Type 316 stainless. Used like marine eyes, but thinner across to fit in narrow forks.
Brand: C.sherman Johnson
- Triangle Plates
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $24.99 - 87.99 USD
Schaefer Triangle Plates Plates, 3/8" Pin Dia., 2 3/4" Width . Create your own adjustment system on any split backstay rig. Plates are Type 304 stainless steel, and come in pairs with three clevis and cotter pins. Additional sizes available through Special Order.
Brand: Schaefer
C.sherman Johnson Splice Lines Lifeline Fittings E. Open Body Turnbuckle With Eye . Popular Johnson lifeline fittings are now available with eye ends for today's high-tech low stretch line. Recommended for use with 1/4" Amsteel or similar single braid, which weighs one seventh as much as 1/4"...
Brand: C.sherman Johnson
C.sherman Johnson Pelican Over Center Hooks Hand Crimp Hook, 3/16" Wire Size, 1/4 Adj. Range, 5/16 24lh Thread . True over-center design opens easily under tension so you don t have to create slack in the line. Investment cast 316 stainless with pull pin release.
Brand: C.sherman Johnson
- Stemball Fittings
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $7.29 - 54.99 USD
Navtec Stemball Fittings Swage, 5/16in . Electro-polished 316 stainless steel.
Brand: Navtec
C.sherman Johnson Tubular Pelican Hooks Machine Swage Hook, 1/8" Wire Size, 1/2" Adj. Range, 1/4 28lh Thread . Traditionally styled pelican hooks with a hinged lock mechanism for security Cannot be accidentally released Locks closed with a cotter pin for racing or offshore sailing Takeup range:...
Brand: C.sherman Johnson
- Single Gate Eyes
- Sailboat Hardware > Lifelines & Terminals > Lifeline Terminals
- $13.49 - 28.99 USD
C.sherman Johnson Single Gate Eyes Machine Swage Eye, 5/32" Wire Size . Used at an attachment point for pelican hooks on gate openings. The eye on the standing part of the lifeline wire also prevents the lifelines from going slack when the gate is open.
Brand: C.sherman Johnson
- Lifeline Adjusters
- Sailboat Hardware > Lifelines & Terminals > Lifeline Terminals
- $13.99 - 24.99 USD
C.sherman Johnson Lifeline Adjusters Machine Swage Adjuster, 1/8" Wire, 7/8" Adj. Range, 1/4 28lh Thread . Take up slack at a gate, or at the end of a long run. Knurled adjustment knob with lock nut.
Brand: C.sherman Johnson
- Lifeline Studs
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $6.29 - 15.49 USD
Hayn Lifeline Studs Stud, 1/8" Wire, 10 32 X 3/4" Thread, Lh . CNC-machined from 316-grade stainless steel. Important Note: 1/4" Lifeline fittings use 7/32" dies.
Brand: Hayn
Loos & Company Single Shank Stainless Ball Stop 3/16" . Commonly used in halyards. Type 302 stainless steel.
Brand: Loos & Company
- Gate Stops
- Sailboat Hardware > Lifelines & Terminals > Lifeline Terminals
- $7.49 - 7.99 USD
C.sherman Johnson Gate Stops Stop, 1/4" Nominal Dia. (wire), 3/8" Max. Coating . Normally installed over vinyl-coated lifelines. Used in place of interlocking gate eyes.
Brand: C.sherman Johnson
|