The West Advisor®
|
Sailboat Rigging Terminals
Hayn Hi Mod Failsafe Insulators Insulator, Compression End, 7/32" Wire . The Failsafe Insulator, with features similar to the other Hi-Mod fittings, uses an internal ball socket in the main body which threads onto the connecting stud. The nut is insulated by a Tufnol socket, isolating the...
Brand: Hayn
Ronstan Backstay Insulators/antennas Insulator, 5/16in Wire . Turn your backstay into an antenna! For your steel wire backstay to serve as an SSB or ham radio antenna, it must be electrically isolated at both ends. This technically advanced, lightweight insulator is used at the top and bottom of...
Brand: Ronstan
Hayn Hi Mod Compression Toggle, 5/16" . Produced by Petersen Stainless Rigging in the UK and distributed exclusively by Hayn Marine in the USA, the Hi-MOD mechanical terminal is the latest advancement in swageless fittings. These terminals have a unique crown ring that assures the wires stay...
Brand: Hayn
- Link Tangs
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $37.99 - 114.99 USD
Schaefer Link Tangs Tang, 1/2" Pin Dia., 5 5/8" Adj. Range, 1/4" Strap Width . High-quality stainless. Used with marine eyes or toggles to permit shroud adjustment. Sold in pairs with clevis and cotter pins.
Brand: Schaefer
Navtec Norseman Swageless Eye Terminals Terminal, 9/32" Wire Dia., 1/2" Id Pin Size, 3/16" Length . May be hand fitted without the use of special tools. Simply slip the body of the terminal over the full diameter of the cable. Unlay the outer wires and fit the cone over the center core. Re-lay...
Brand: Navtec
Hayn Hi Mod Compression Extenders Extender, 5/32" Wire . Solid and strong, the innovative Hi-MOD extender lends incredible holding power to any compression system. The star-shaped Crown Ring design holds wire without wire end bending.
Brand: Hayn
Navtec Extra Long Stud Terminals Terminal, 1/4" Wire Diam., 1/2" Thread Size, 7 Length . Norseman Swageless Stud Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and...
Brand: Navtec
- Swage Studs
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $4.88 - 89.99 USD
C.sherman Johnson Swage Studs Stud, 1/8" Wire Size, 1/4 28lh Thread . The wire end of the turnbuckle generally uses right hand (RH) threads, and the deck end uses left hand (LH) threads. Note that there are two dimensions: The wire diameter and the thread size.
Brand: C.sherman Johnson
- Triangle Plates
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $24.99 - 87.99 USD
Schaefer Triangle Plates Plates, 3/8" Pin Dia., 2 3/4" Width . Create your own adjustment system on any split backstay rig. Plates are Type 304 stainless steel, and come in pairs with three clevis and cotter pins. Additional sizes available through Special Order.
Brand: Schaefer
Hayn Hi Mod Compression Stud, 5/16" X 5/8" Thread . Produced by Petersen Stainless Rigging in the UK and distributed exclusively by Hayn Marine in the USA, the Hi-MOD mechanical terminal is the latest advancement in swageless fittings. These terminals have a unique crown ring that assures the...
Brand: Hayn
Hayn Hi Mod Compression Stud, 9/32" X 1/2" Thread . Produced by Petersen Stainless Rigging in the UK and distributed exclusively by Hayn Marine in the USA, the Hi-MOD mechanical terminal is the latest advancement in swageless fittings. These terminals have a unique crown ring that assures the...
Brand: Hayn
- T Bolts with Toggle
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $10.99 - 62.99 USD
C.sherman Johnson T Bolts With Toggle Toggle, 1/2" Pin Dia., 5 11/16"l . 316 stainless steel with lefthand threads. Length is measured from bottom of cotter hole to center of clevis pin. Measure in Body/Pin is for each body and pin.
Brand: C.sherman Johnson
- Cones for 1x19 Wire
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $5.49 - 15.49 USD
Navtec Cones For 1x19 Wire Cone, 5/16" Diameter . Cones for 1x19 wire (cones for 7-Strand and Dyform available only through Special Order).
Brand: Navtec
Ronstan Stainless Sailmakers Thimbles Thimble, 1/8"dia. Wire/line, 11/32" Inside Width . Sailmakers thimbles are completely enclosed and should be used anywhere a thimble is needed on running rigging to prevent chafe on the lines.
Brand: Ronstan
West Marine Stainless Steel Thimbles 3/4" Thimble, Package Of 1 . Very strong type 316 stainless steel.
Brand: West Marine
- Wire Rope Clamps
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $0.39 - 9.99 USD
West Marine Wire Rope Clamps Stainless Clamp, 9/32" 5/16" . Join cables or create a secure eye with these clamps. Each.
Brand: West Marine
Sea Dog 5/16" Wire Rope Clamp . Investment Cast 316 Stainless Body / AISI 304 Stainless U-Bolt Accepts 5/16" wire 1-5/8" Long 1-3/8" wide Thread diameter 1/4"
Brand: Sea Dog
- Copper Oval Sleeves
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $1.19 - 3.29 USD
West Marine Copper Oval Sleeves 5/32" Sleeves, Qty/pk . Used to make eyes in 7x19 wire rope. Zinc-plated copper.
Brand: West Marine
|
Sign In
