The West Advisor®
|
Terminal Rigging Terminals
Hayn Hi Mod Failsafe Insulators Insulator, Compression End, 7/32" Wire . The Failsafe Insulator, with features similar to the other Hi-Mod fittings, uses an internal ball socket in the main body which threads onto the connecting stud. The nut is insulated by a Tufnol socket, isolating the...
Brand: Hayn
Hayn Hi Mod Compression Splice Links Link, 1/8" Wire . These slim new Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. No sealant or packing needed, with special star-shaped crown rings...
Brand: Hayn
Hayn Hi Mod Compression Eyes Eye, 1/4" Wire X 7/16" Pin . These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. No sealant or packing needed, with special star-shaped crown rings...
Brand: Hayn
Hayn Hi Mod Compression Toggle, 5/16" . Produced by Petersen Stainless Rigging in the UK and distributed exclusively by Hayn Marine in the USA, the Hi-MOD mechanical terminal is the latest advancement in swageless fittings. These terminals have a unique crown ring that assures the wires stay...
Brand: Hayn
- Link Tangs
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $37.99 - 114.99 USD
Schaefer Link Tangs Tang, 1/2" Pin Dia., 5 5/8" Adj. Range, 1/4" Strap Width . High-quality stainless. Used with marine eyes or toggles to permit shroud adjustment. Sold in pairs with clevis and cotter pins.
Brand: Schaefer
Navtec Norseman Swageless Eye Terminals Terminal, 3/16" Wire Dia., 3/8" Id Pin Size, 1/8" Length . May be hand fitted without the use of special tools. Simply slip the body of the terminal over the full diameter of the cable. Unlay the outer wires and fit the cone over the center core. Re-lay...
Brand: Navtec
Navtec Extra Long Stud Terminals Terminal, 1/4" Wire Diam., 1/2" Thread Size, 7 Length . Norseman Swageless Stud Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and...
Brand: Navtec
- Swage Studs
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $4.88 - 89.99 USD
C.sherman Johnson Swage Studs Stud, 5/16" Wire Size, 1/2 20rh Thread . The wire end of the turnbuckle generally uses right hand (RH) threads, and the deck end uses left hand (LH) threads. Note that there are two dimensions: The wire diameter and the thread size.
Brand: C.sherman Johnson
- Triangle Plates
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $24.99 - 87.99 USD
Schaefer Triangle Plates Plates, 3/8" Pin Dia., 2 3/4" Width . Create your own adjustment system on any split backstay rig. Plates are Type 304 stainless steel, and come in pairs with three clevis and cotter pins. Additional sizes available through Special Order.
Brand: Schaefer
Hayn Hi Mod Compression Stud, 5/16" X 5/8" Thread . Produced by Petersen Stainless Rigging in the UK and distributed exclusively by Hayn Marine in the USA, the Hi-MOD mechanical terminal is the latest advancement in swageless fittings. These terminals have a unique crown ring that assures the...
Brand: Hayn
Hayn Hi Mod Compression Stud, 9/32" X 1/2" Thread . Produced by Petersen Stainless Rigging in the UK and distributed exclusively by Hayn Marine in the USA, the Hi-MOD mechanical terminal is the latest advancement in swageless fittings. These terminals have a unique crown ring that assures the...
Brand: Hayn
- Stay Adjusters
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $19.99 - 43.99 USD
C.sherman Johnson Stay Adjusters Adjuster, 1/8" Wire Dia., 1/4" Pin 2 Adj. Range, 3000lb. Breaking Strength . Knurled nut permits precise, one-handed adjustment. Terminal rod is captive, so it cannot come apart even when fully extended. Jaw and clevis pin at one end; swage stud at the other....
Brand: C.sherman Johnson
- Marine Swage Eyes
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $7.79 - 34.81 USD
Ronstan Marine Swage Eyes Eye, 3/16" Wire, 3/8" Dia. . Used to connect wire to fittings with clevis pins, like mast terminals, forks, double jaw turnbuckles, etc. Type 316 stainless. Marine eyes are heavier and stronger than aircraft eyes.
Brand: Ronstan
C.sherman Johnson T Style Turnbuckle Jaw Jaw, 5/16" 24 Rh Thread Size . All toggle jaws can be used for life line and rigging applications. Deck Toggles are used for lifeline and architectural applications only. Use for lifeline or rigging applications.
Brand: C.sherman Johnson
- Cones for 1x19 Wire
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $5.49 - 15.49 USD
Navtec Cones For 1x19 Wire Cone, 5/16" Diameter . Cones for 1x19 wire (cones for 7-Strand and Dyform available only through Special Order).
Brand: Navtec
Ronstan Stainless Sailmakers Thimbles Thimble, 1/8"dia. Wire/line, 11/32" Inside Width . Sailmakers thimbles are completely enclosed and should be used anywhere a thimble is needed on running rigging to prevent chafe on the lines.
Brand: Ronstan
- Wire Rope Clamps
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $0.39 - 9.99 USD
West Marine Wire Rope Clamps Stainless Clamp, 9/32" 5/16" . Join cables or create a secure eye with these clamps. Each.
Brand: West Marine
Sea Dog 5/16" Wire Rope Clamp . Investment Cast 316 Stainless Body / AISI 304 Stainless U-Bolt Accepts 5/16" wire 1-5/8" Long 1-3/8" wide Thread diameter 1/4"
Brand: Sea Dog
|
