The West Advisor®
|
Terminals
Navtec Norseman Swageless Fork Terminals Terminal, 1/4" Wire Dia., 1/2" Eye Id Pin Size, 5/8" Length . Norseman Swageless Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special...
Brand: Navtec
- Stud Terminals
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $41.99 - 114.99 USD
Navtec Stud Terminals Terminal, 3/16" Wire Diam., 5/16" Thread Size, 2 7/8" Length . Norseman Swageless Stud Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and can...
Brand: Navtec
Navtec Norseman Swageless Eye Terminals Terminal, 3/16" Wire Dia., 3/8" Id Pin Size, 1/8" Length . May be hand fitted without the use of special tools. Simply slip the body of the terminal over the full diameter of the cable. Unlay the outer wires and fit the cone over the center core. Re-lay...
Brand: Navtec
Navtec Extra Long Stud Terminals Terminal, 1/4" Wire Diam., 1/2" Thread Size, 7 Length . Norseman Swageless Stud Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and...
Brand: Navtec
Ancor Marine Waterproof Ring Terminals 12 10 Gauge Terminals, Yellow, #10 Hole Dia., 25 Qty/pk . A short length of adhesive shrink tubing creates a waterproof wire termination. Style: Ring Conductor Material: Tinned Copper Wire Attachment Method: Crimp tool and heat Insulation Type: Nylon shrink...
Brand: Ancor Marine
Ancor Marine Nylon Insulated Ring Terminals With Insulation Grip Terminals, Blue, 16 14 Wire Gauge, #6 Screw Size, 25 Qty/pk . Corrosion-resistant tinned copper with brass sleeve for insulation grip and funnel entry for easy wire insertion. Style: Ring Conductor Material: Tinned Copper Wire...
Brand: Ancor Marine
Blue Sea Systems Feed Through Terminals 3/8", 250a Rating, 2" X 1" Base, Black . Feed-through terminals are ideal for passing high-current cables through hulls, decks and bulkheads where watertight or vapor-proof integrity must be maintained. These terminals also eliminate chafing and provide...
Brand: Blue Sea Systems
Navtec Hf 8, Jaw Terminal For Rod . Used as upper and lower terminals on rod backstays. Also used on low-fatigue assemblies like bobstays.
Brand: Navtec
Ancor Marine Adhesive Lined Heat Shrink Flanged Spade Terminals . Cross-linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Nylon...
Brand: Ancor Marine
Ancor Marine Nylon Insulated Ring Terminals With Funnel Entry Terminals, Yellow, 4 Wire Gauge, 5/16" Screw Size, Qty/pk . Corrosion-resistant tinned copper with brass sleeve for insulation grip and funnel entry for easy wire insertion. Style: Ring Conductor Material: Tinned Copper Wire...
Brand: Ancor Marine
West Marine Wiring Connector Kit, Electrical Terminal Set . Always have the right terminal for the job with this comprehensive kit. Terminal set includes 180 waterproof, insulated pieces including ring terminals, butt splice connectors, quick connects and snap plugs. Heat-shrink connector set...
Brand: West Marine
Blue Sea Systems Terminal Fuse Blocks Block, 3/8" Mounting Hole, 2 Studs . New isolated stud design uses standard 5/16" hardware and permits stacking of terminals Compact, high-amp fuse Appropriate for DC Main, inverter, windlass, and bow thruster circuit protection Provides high current...
Brand: Blue Sea Systems
- Terminal Fuses
- Electrical > Electrical Distribution > Circuit Protection
- $15.99 USD
Blue Sea Systems Terminal Fuses 90a, Purple . Terminal Fuses are ignition-protected and meet ABYC requirements for DC Main circuit protection on large battery banks. Clear window for visual indication of blown fuse and color-coded for each amperage. 10,000A interrupt rating. Max. 58V DC. 8.25mm...
Brand: Blue Sea Systems
C.sherman Johnson Turnbuckle Spare Terminal, Rh Thread . Exclusively for lifeline applications. 1/4" pin dia. Lock nuts prevent loosening. Open body (O), and Tubular (T) styles.*Open body style with cotter pins, not lock nuts.
Brand: C.sherman Johnson
Lowrance 120 Ohm Terminating Kit . Lowrance Terminating Kit, one 120 ohm female and one 120 ohm male.
Brand: Lowrance
C.sherman Johnson Terminal Locking Nuts Nut, 1/4 28 Lh Thread . For check nut locking turnbuckles. Sold in pairs.
Brand: C.sherman Johnson
C.sherman Johnson Stanchion Terminals Hand Crimp Terminal, 3/16" Wire Size . Used where the cable needs to be terminated at the stanchion.
Brand: C.sherman Johnson
Blue Sea Systems Cablecaps For Add On Battery Terminals Small Cablecap, 4, 2, 1 Gauges, 1/2" Opening . Use on batteries with automotive-style terminals to which you ve added clamp-on marine terminals. Molded PVC enables installation of the CableCap after the terminals are crimped on cables. One...
Brand: Blue Sea Systems
|