No image available
No image available
Your request is being processed.
Shopping Cart

Tie Down Engineering Rollers

Complete Vented Rotor Disc Brake Kit
Tie Down Engineering Complete Vented Rotor Disc Brake Kit . Everything you need to add brakes to your trailer Includes 6600lb. Capacity Disk Brake Actuator coupler with solenoid (Model 2813947), two Eliminator 10" Vented Disc Brakes and single Axle Brake Line Kit. The 6600lb. Capacity Brake...
Brand: Tie Down Engineering
Shop Now
Brake Actuating Couplers
Tie Down Engineering Brake Actuating Couplers Disc Ready Coupler, 8000lb. Capacity . Developed and capacity tested for nearly three years with input by trailer manufacturers and users to give you unsurpassed power and safety while towing. The unique all-aluminum master cylinder incorporates a...
Brand: Tie Down Engineering
Shop Now
Marine Coated Drum Brakes & Hubs
Tie Down Engineering Marine Coated Drum Brakes & Hubs 10" Dia. Galv X Assembly . These surge-activated, drum brakes are built to withstand a marine environment GalvX coated, with stainless steel springs and fasteners. Replaces any 2 1/4"W x 10" or 12" dia. trailer brake system. Front shoe design...
Brand: Tie Down Engineering
Shop Now
Axle Brake Line Kits
  • Axle Brake Line Kits
  • Trailering > Wheels > Bunks & Rollers > Trailer Brakes & Axles
  • $74.99 - 137.99 USD
Tie Down Engineering Axle Brake Line Kits Lining Dual . Essential parts for trailer brakes Designed to be used on trailers using either surge brake actuators or power brake actuators (vacuum/hydraulic, air/hydraulic, electric/hydraulic). DOT/flexible hoses approved for use on all trailer brakes...
Brand: Tie Down Engineering
Shop Now
Fixed Angle Roller Guide (2)
Tie Down Engineering Fixed Angle Roller Guide (2) . Mount these 13" rubber rollers on top or beneath the frame for added adjustment. The hot dip galvanized mounts adjust for widths up to 13" on each side and fit frames up to 4". Sold in pairs with hardware included
Brand: Tie Down Engineering
Shop Now
Super Lube 5 Stud Hub Kit
Tie Down Engineering Super Lube 5 Stud Hub Kit . Just take out of the box and install these hub kits are already assembled and factory pregreased. Greasing both bearings is now easy, as the convenient zerk fitting and rubber grommet in the dust cap enable fresh grease to be forced in and old...
Brand: Tie Down Engineering
Shop Now
Slipper Leaf Springs
  • Slipper Leaf Springs
  • Trailering > Wheels > Bunks & Rollers > Trailer Brakes & Axles
  • $24.99 - 57.99 USD
Tie Down Engineering Slipper Leaf Springs Radius End 1000 Lbs Capacity Bulk . Replace rusted or soft springs before experiencing a failure which could damage your boat and trailer. These heavy-duty steel replacement springs will restore your trailer s carrying capacity. Include 9/16" ID nylon...
Brand: Tie Down Engineering
Shop Now
Double Eye Spring 81192
Tie Down Engineering Double Eye Spring 81192 . New Page 1 Heavy duty spring steel Four leaves 2500 lb capacity 25 1/4"L x 3"H Sold individually Ship 20 lbs
Brand: Tie Down Engineering
Shop Now
Flushing System for Brakes
Tie Down Engineering Flushing System For Brakes . Extends brake component life and reduces brake maintenance by flushing salt, sand, and corrosive material. Easy to use" "you don't need to disassemble your brakes, and it works with your garden hose. Fits 10" and 12" drum-type brakes, can easily...
Brand: Tie Down Engineering
Shop Now
Brake Pad Kit
  • Brake Pad Kit
  • Trailering > Wheels > Bunks & Rollers > Trailer Brakes & Axles
  • $39.99 USD
Tie Down Engineering Brake Pad Kit . Replacement pads for 10" and 12" disc brakes. Four pads
Brand: Tie Down Engineering
Shop Now
Trailer Fenders
  • Trailer Fenders
  • Trailering > Wheels > Bunks & Rollers > Bunks > Rollers & Hardware
  • $15.99 - 32.99 USD
Tie Down Engineering Trailer Fenders For 8" Tires . Replace your rusty trailer fenders and keep road debris and grime from marring your boat's hull. These fenders fit most standard tire sizes and can be drilled for a variety of mounting options. Heavy 16-gauge pre-galvanized steel can be painted...
Brand: Tie Down Engineering
Shop Now
Bearing Protectors and Covers
Tie Down Engineering Bearing Protectors And Covers Protectors, 2.32 W/2 . Bearing Protectors and Clear Plastic Bearing Covers
Brand: Tie Down Engineering
Shop Now
Axle Tie Plate Kits
  • Axle Tie Plate Kits
  • Trailering > Wheels > Bunks & Rollers > Trailer Brakes & Axles
  • $6.49 - 28.99 USD
Tie Down Engineering Axle Plate Kits For 2.375" Round . Kits contain four U-bolts, eight lock nuts and two 5-hole tie plates. Pair of universal plates fits 3/8"dia., 7/16"dia. and 1/2"dia.
Brand: Tie Down Engineering
Shop Now
Precision Tapered Roller Bearings
Tie Down Engineering Precision Tapered Roller Bearings 1" W/ Dust Cap . Each kit includes: 2 cones, 2 cups, seal, cotter pin and dust cap where noted. Attractively packed for retail sales.
Brand: Tie Down Engineering
Shop Now
Plastic Trailer Fenders
Tie Down Engineering Plastic Trailer Fenders Flush Mount Brackets (2) . No more rust! Upgrade your trailer with these high-impact polyethylene fenders designed for standard and low-profile tires. High-gloss finish is molded in and not added on later. UV-protected to resist yellowing and fading....
Brand: Tie Down Engineering
Shop Now
Step Bracket
  • Step Bracket
  • Trailering > Wheels > Bunks & Rollers > Bunks > Rollers & Hardware
  • $9.79 - 9.99 USD
Tie Down Engineering Step Bracket . Galvanized Step Bracket for use with TDE Plastic Fender (model 3703493). 13.219" L x 4.812"W x 1.188"D One per package.
Brand: Tie Down Engineering
Shop Now
Rear Spring Hangers
  • Rear Spring Hangers
  • Trailering > Wheels > Bunks & Rollers > Trailer Brakes & Axles
  • $5.79 USD
Tie Down Engineering Rear Spring Hangers . Keep a few of these on hand for quick replacement of your worn rear spring hangers.Use this hanger on rear slipper springs 1 3/4-2"W. 5,200-8,000-lb capacity for medium to heavy-duty axles. Solid steel hanger, 1/4" stock
Brand: Tie Down Engineering
Shop Now
Bearing Seals
  • Bearing Seals
  • Trailering > Wheels > Bunks & Rollers > Bearings & Lubricants
  • $4.69 - 5.29 USD
Tie Down Engineering Bearing Seals Pair 1 1/4" . Seals should be replaced every time they're removed for bearing inspection. Sold in pairs.
Brand: Tie Down Engineering
Shop Now

© West Marine All Rights Reserved p-wcsapp02.westmarine.net