The West Advisor®
|
Turnbuckles & Toggles Mast Hardware
Navtec Integral Hydraulic Backstay Adjusters Adjuster, 1/2" Piston Size, 5400 Max. Force At Std. Relief Valve Setting, 9/32" 1x19 Wire Pin Dia, 44.3" Length Open, 30.8" Closed, 13.5" Stroke . Self-contained hydraulic adjusters feature a longer pump handle that produces a faster pumping motion...
Brand: Navtec
Wichard Mechanical Backstay & Babystay Adjusters Adjuster, 9 13/16" Closed, 12 Open . These stay adjusters are easy to adjust using a large-diameter, hand-turned wheel. Constructed of stainless steel with a synthetic wheel. Affords about 6-3/4" of travel. Backstay adjuster features a 1/2" pin...
Brand: Wichard
Alexander Roberts Turnbuckle, Toggle/swage 1/4" Wire Size, 1/2" Pin Dia., 10 1/8" Min. Length, 14 Max 15,000lb. Breaking Strength . Lengths are measured from bottom of swage hole to pin center.
Brand: Alexander Roberts
- Link Tangs
- Sailboat Hardware > Mast & Standing Rigging > Turnbuckles & Toggles
- $37.99 - 114.99 USD
Schaefer Link Tangs Tang, 5/8" Pin Dia., 6 7/8" Adj. Range, 1 1/2" Strap Width . High-quality stainless. Used with marine eyes or toggles to permit shroud adjustment. Sold in pairs with clevis and cotter pins.
Brand: Schaefer
C.sherman Johnson Quick Release Shroud Levers Small, 7 Holes, 1 7/8" Adj. Range, 1/4" Chainplate Pin Dia., 1/8" Wire . Permit easy rigging adjustments, and allow masts to be stepped and unstepped easily. The lever is easy to open and close under load and has a quick release pin for security....
Brand: C.sherman Johnson
C.sherman Johnson Split Backstay Adjuster . Instead of coupling three blocks together to get the required purchase, this sheave assembly is integral and reduces the point loading on the backstay by using two sheaves per bridle. Delrin plain bearing sheaves for wire to 3/16" and boats to 30' LOA....
Brand: C.sherman Johnson
Hayn Stainless Steel Threaded Bolt Toggle Jaw, 5/8" Pin . Tubular stainless, manufactured from 316 grade stainless steel. 5/8" and larger turnbuckle assemblies have bronze thread insert for a non-galling feature. 5/8-18 thread size. 3-1/2" thread length. 5/8" pins size. Right hand.
Brand: Hayn
- Shroud Adjusters
- Sailboat Hardware > Mast & Standing Rigging > Turnbuckles & Toggles
- $12.99 - 35.66 USD
Ronstan Shroud Adjusters Adjuster, 10 Holes, 6 7/8" Length, 1/2" Adj. Increment, 1/4" Pin Dia. . For use on small boats. Made from stainless steel. The RF 2331 has a unique safety tab and pin retaining system that reduces the risk of losing the stay when adjusting the rig.
Brand: Ronstan
Suncor Marine Tubular Turnbuckles Toggle & Toggle, 1/4" Pin Dia. . No need for unsightly turnbuckle boots or messy rigging tape. Locking hex nuts replace sharp cotter pins on these streamlined all stainless steel turnbuckles. An integral toggle jaw maintains rigging alignment. Professional...
Brand: Suncor
|
Sign In
