The West Advisor®
|
U.S. Sailing Sailboat Fittings
Facnor Accessories For Fx Code Zero & Gennaker Furlers Fb70 Block Fx4500 . Facnor Block 2 to 1 Option Often high halyard loads are required to properly sail with Code Zeros so Facnor offers many variations of 2 to 1 fittings. Compact sheaves integrated into the halyard swivel reduce weight aloft...
Brand: Facnor
Harken Captive Ball Bearing Spinnaker Pole Cars Car, Track #1616, 1350sq.ft. Max. Sail Area, 2100lb. Swl . Now with captive ball bearings, which eliminates the need for a ball-bearing loader during installation or removal from track. These cars run freely, fit low-beam traveler track and are...
Brand: Harken
Spinlock Tiller Extensions & Extras Repair Kit . Ergonomically pleasing [EA] asymmetric wrap-around handle fits the hand better and supports the wrist more comfortably on all points of sailing than a symmetric handle, according to Spinlock tests. In high-load, two-handed helming, the angled hand...
Brand: Spinlock
Harken Ball Bearing Winch Handles 10" Standard . Ball bearings allow fast, free cranking. Comfortable grip. Fits most common winches built today. Grip: Ball bearing (Double-grip Model 5252689) Type: Locking or standard Material: Aluminum (except Model 2507077 which is chrome) Warranty: Three years
Brand: Harken
Schaefer T Track Sliders With Universal Adapters Slider, Fits 1 1/4" X 3/16" . Stainless T-track sliders use unique captive liners of slippery polyethylene to practically eliminate friction, and reduce breakage common to competitive designs with protruding ends. Pin stop for locking into...
Brand: Schaefer
- Mainsail Feeder
- Sailboat Hardware > Sailmaking & Splicing > Hanks > Slides & Sail Ties
- $77.99 USD
Spinlock Mainsail Feeder . Graphite-loaded, anodized alloy rollers guide the bolt rope making heavy, stiff mainsails easy to hoist. 3/32" gap fits bolt ropes to 7/16"dia. Easily installs and may be repositioned via two flathead screws which tighten a 3/8"dia. stainless-steel slug within mast slot.
Brand: Spinlock
Sail Systems Pedestal/mast Winch Handle Holder . Store handles in a central location with this tough TPR rubber holder. Fits snugly around 3-1/2" and 4" pedestal columns. Stainless steel clamps included. Fits one standard or lock-in handle.
Brand: Sail Systems
- Universal Mast Boot
- Sailboat Hardware > Mast & Standing Rigging > Shroud Covers & Mast Boots
- $29.99 - 35.99 USD
Sail Systems Universal Mast Boot Fits Masts With Circumferences Of 17 1/2" And Larger Corresponding Collars Up To 31" . Easily installed over stepped masts by slitting one side, trimming to fit, and gluing with adhesive supplied. Secure with stainless hose clamps. Flexible, UV-resistant plastic....
Brand: Sail Systems
- Sail Snaps, Four Pack
- Sailboat Hardware > Sailmaking & Splicing > Hanks > Slides & Sail Ties
- $27.99 - 31.99 USD
C Level Sail Snaps, Four Pack . Two each 6' and 8' straps; easily cut to fitDon t tie it, buckle it! Strong poly webbing and acetal side-squeeze buckles offer quick, secure fastening and easier tie-ups of flaked or rolled sails. Set of four straps fits an average-size main and includes one each...
Brand: C Level
- Spreader Boots
- Sailboat Hardware > Mast & Standing Rigging > Shroud Covers & Mast Boots
- $22.99 - 29.99 USD
Taylor Made Spreader Boots Small Boot, Fits 1" Round . Protect your sails with these unique chafe guards. Made of tough polyester guaranteed not to deteriorate in the sun for three years! Attach securely on spreaders with handy webbing/buckle arrangement. Sold in pairs.
Brand: Taylor Made
- Spreader Boots
- Sailboat Hardware > Mast & Standing Rigging > Shroud Covers & Mast Boots
- $22.99 - 29.99 USD
West Marine Spreader Boots Medium, Fits Tips 2 1/4" X 11/16", Shrouds To 3/16" . Protect your sails from ripping or tearing on your boat s spreaders with these soft injection-molded UV-resistant synthetic rubber spreader boots. They fit wing and round spreaders, feature a smaller frontal area...
Brand: West Marine
Davis Instruments Light For Windex 10, 15 & Sport Indicators . This masthead light illuminates Windex wind indicators for perfect night sailing Illuminates reflective reference tabs on underside of the Windex 10 and 15. Mounts directly to the masthead fitting. Draws only 120mA Mast wire not...
Brand: Davis Instruments
Harken Dinghy Clew Hook With 404 Block . It installs permanently on the boom and allows you to instantly attach your sail in high wind and waves. The Dinghy Clew Hook is designed for Lasers and other loose-footed dinghies
Brand: Harken
- Winch Handle Pocket
- Sailboat Hardware > Sailing Winches > Winch Handles & Holders
- $14.68 - 15.00 USD
Lewmar Winch Handle Pocket . PVC holder fits one standard or lock-in handle Easy to install Mounts anywhere in a vertical position
Brand: Lewmar
- Dinghy Clew Hook
- Sailboat Hardware > Shackles > Snaps & Fittings > Trapeze Gear
- $11.49 - 12.80 USD
Harken Dinghy Clew Hook . Install it on the boom of your Laser or other loose-footed dinghy sail so you can instantly attach or release sails in high winds and waves. Will not release accidentally. Lashing line is included
Brand: Harken
- Sail Lashes
- Sailboat Hardware > Sailmaking & Splicing > Hanks > Slides & Sail Ties
- $6.29 - 11.99 USD
Star Brite Sail Lashes With Swivel End, 1/4" X 16" . Polyester elastic cord for maximum durability and UV-resistance. Swivel end fitting has stainless steel stops. 3-pack.
Brand: Star Brite
Ronstan Molded Trapeze Handle . Comfortable and easy to handle in performance situations and rugged for use in any sailing environment.
Brand: Ronstan
- Everything Wrap
- Sailboat Hardware > Sailmaking & Splicing > Hanks > Slides & Sail Ties
- $3.99 - 9.99 USD
Strap Eze Everything Wrap 2 Wraps; 18" And 25" . These innovative elastic straps are just the thing for securing sails, sheets and more. A hook-and-loop fastening system eliminates metal or plastic parts that break over time. 2"W straps adjust to fit a range of sizes
Brand: Strap Eze
|
Sign In
