The West Advisor®
|
West Marine Mast Hardware
Hayn Hi Mod Failsafe Insulators Insulator, Compression End, 7/32" Wire . The Failsafe Insulator, with features similar to the other Hi-Mod fittings, uses an internal ball socket in the main body which threads onto the connecting stud. The nut is insulated by a Tufnol socket, isolating the...
Brand: Hayn
Hayn Hi Mod Compression Forks Fork, 1/4" Wire X 7/16" Pin . These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. No sealant or packing needed, with special star-shaped crown rings...
Brand: Hayn
Hayn Hi Mod Compression Toggles Toggle, 5/16" Wire X 9/16" Pin . These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. No sealant or packing needed, with special star-shaped crown...
Brand: Hayn
Hayn Hi Mod Compression Studs Stud, 1/2" Wire X 3/4" Thread . These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. No sealant or packing needed, with special star-shaped crown rings...
Brand: Hayn
- Open Body Turnbuckles
- Sailboat Hardware > Mast & Standing Rigging > Turnbuckles & Toggles
- $35.99 - 184.99 USD
Hayn Open Body Turnbuckles Chrome Turnbuckle, 3/32" 5/32" Wire Size, 1/4" Pin 3200lb. Tensile Strength . Chrome-plated or plain bronze body with 316 stainless fittings. Working load should not exceed 40% of tensile strength. Toggle Jaw/Toggle Jaw lengths are measured from pin to pin.
Brand: Hayn
Harken Mast Base Lead Blocks Block, Standard, 1 3/4" Sheave Dia., 3/8" Line 750lb. Swl . For leading lines aft and over cabin tops or coamings. Narrow sheave carriers permit mounting several in a small area. Low lead profile keeps lines close to the deck. Standard block features a stainless...
Brand: Harken
- Link Tangs
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $37.99 - 114.99 USD
Schaefer Link Tangs Tang, 1/2" Pin Dia., 5 5/8" Adj. Range, 1/4" Strap Width . High-quality stainless. Used with marine eyes or toggles to permit shroud adjustment. Sold in pairs with clevis and cotter pins.
Brand: Schaefer
Hayn Hi Mod Compression Extenders Extender, 5/32" Wire . Solid and strong, the innovative Hi-MOD extender lends incredible holding power to any compression system. The star-shaped Crown Ring design holds wire without wire end bending.
Brand: Hayn
Navtec Extra Long Stud Terminals Terminal, 1/4" Wire Diam., 1/2" Thread Size, 7 Length . Norseman Swageless Stud Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and...
Brand: Navtec
- Swage Studs
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $4.88 - 89.99 USD
C.sherman Johnson Swage Studs Stud, 1/8" Wire Size, 1/4 28lh Thread . The wire end of the turnbuckle generally uses right hand (RH) threads, and the deck end uses left hand (LH) threads. Note that there are two dimensions: The wire diameter and the thread size.
Brand: C.sherman Johnson
- T Bolts with Toggle
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $10.99 - 62.99 USD
C.sherman Johnson T Bolts With Toggle Toggle, 1/2" Pin Dia., 5 11/16"l . 316 stainless steel with lefthand threads. Length is measured from bottom of cotter hole to center of clevis pin. Measure in Body/Pin is for each body and pin.
Brand: C.sherman Johnson
- Mast Pad Eye
- Sailboat Hardware > Downwind Poles & Cars > Spinnaker Poles & Gear
- $47.49 - 51.81 USD
Ronstan Mast Pad Eye . Stainless steel. For use with larger "pushbutton" poles. Mounting plate: 2-3/4" x 2" ID: 1-3/4" Ring: 7/16" thick Attaches with four 1/4" RHMS Bent to accommodate curved masts with a radius of 3-1/8"
Brand: Ronstan
- Stay Adjusters
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $19.99 - 43.99 USD
C.sherman Johnson Stay Adjusters Adjuster, 3/32" Wire Dia., 3/16" Pin Adj. Range, 1000lb. Breaking Strength . Knurled nut permits precise, one-handed adjustment. Terminal rod is captive, so it cannot come apart even when fully extended. Jaw and clevis pin at one end; swage stud at the other....
Brand: C.sherman Johnson
- Spreader Boots
- Sailboat Hardware > Mast & Standing Rigging > Shroud Covers & Mast Boots
- $22.99 - 29.99 USD
Taylor Made Spreader Boots Small Boot, Fits 1" Round . Protect your sails with these unique chafe guards. Made of tough polyester guaranteed not to deteriorate in the sun for three years! Attach securely on spreaders with handy webbing/buckle arrangement. Sold in pairs.
Brand: Taylor Made
- Cones for 1x19 Wire
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $5.49 - 15.49 USD
Navtec Cones For 1x19 Wire Cone, 5/16" Diameter . Cones for 1x19 wire (cones for 7-Strand and Dyform available only through Special Order).
Brand: Navtec
- Wire Rope Clamps
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $0.39 - 9.99 USD
West Marine Wire Rope Clamps Stainless Clamp, 9/32" 5/16" . Join cables or create a secure eye with these clamps. Each.
Brand: West Marine
Sea Dog 5/16" Wire Rope Clamp . Investment Cast 316 Stainless Body / AISI 304 Stainless U-Bolt Accepts 5/16" wire 1-5/8" Long 1-3/8" wide Thread diameter 1/4"
Brand: Sea Dog
- Copper Oval Sleeves
- Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
- $1.19 - 3.29 USD
West Marine Copper Oval Sleeves 5/32" Sleeves, Qty/pk . Used to make eyes in 7x19 wire rope. Zinc-plated copper.
Brand: West Marine
|
Sign In
