Products related to Reactor For AC70, 5 Ga. (Commercial/Industrial Only)
Pettit Paints 6627 Tie Coat Primer Quart Kit . Ties topcoat to undercoat, regardless of compatibilityGeneral purpose chlorinated rubber used as a primer on metal surfaces and as a tie coat between different types of coatings. Can be used above or below the waterline. Compatible with all...
$51.99
|
Pettit Paints 6149 Easypoxy White Undercoater Undercoater, Quart . Use to fill small surface blemishes and imperfectionsUse as a base coat for Easypoxy enamels when the surface is less than smooth. Can be applied to fiberglass, wood and previously painted surfaces. Dries quickly. Easy to sand....
$35.99
|
Pettit Paints 6980 Rustlok Steel Primer Quart . Easy-to-apply, effective, anti-corrosive barrierOne-part, moisture-cured polyurethane coating locks in and stops the spread of rust on steel, galvanized and stainless steel and cast iron. Forms a dense, waterproof barrier for maximum corrosion...
$39.99
|
Pettit Paints Skip Sand Primer, Qt . Recommended for use over vinylester and other blister-resistant gelcoats where sanding is forbidden, this primer eliminates the need to sand prior to application of antifouling paint. It may also be used over conventional gelcoats and as a tie-coat between...
$49.99
|
Pettit Paints Vivid White Primer, Gal. . Ideal for use under Vivid bright colored antifouling paint and formulated to reduce water absorption in fiberglass hulls and prevent osmotic blistering. It creates a high film build for maximum protection with fewer coats and also provides exceptional...
$99.99
|
Pettit Paints 6455 Metal Primer Quart . Provides corrosion and rust-resistance on steel or aluminum. A corrosion-inhibiting pigment keeps the metal surface in good condition and enhances adhesion to metal of primers and topcoats applied over it. Not recommended for wood or fiberglass. Drying,...
$72.99
|
Interlux Brightside Pre Kote Primer Gray, Quart . Fills minor blemishes and sands easilyOne part primer for use with Brightside or any other one-part topside enamel. Microspheres provide high build and improved sandability. (Replaces Brightside Primer and 279 White Undercoater.) Application:...
$36.99
|
Sterling U 1000 White Primer Quart . For fiberglass and existing paint. Mix U-1000 in a 2:1 ratio with U-1000C catalyst for brush or spray application. To brush, thin with U-2965. To spray, thin with either U-1014 or U-1385. Finish sand with 220 grit for a fine topcoat finish. A mixed quart...
$132.99
|
Interlux No Sand Primer . Speeds up the prepping process prior to application of antifouling paint Eliminates the need to sand fiberglass boats before painting by creating a chemical bond between the fiberglass surface and the first coat of antifouling paint. Quart. Primary Usage: Underwater,...
$36.99
|
Pettit Paints Aluma Protect . Very good as a primer for aluminumTwo-part strontium-chromate primer, mostly used to prime aluminum prior to application of antifouling paint. Can also be used on aluminum as a primer for Easypoxy or ZSpar enamels. Resin and catalyst comprise a two quart kit....
$74.99
|
Detco Marine Propspeed Foul Release System Primer, 1 Liter . New performance coating for propellersUnlike conventional antifouling paint which does not adhere well to underwater metal, or when it does, reduces performance, this unique, environmentally-friendly, two-part coating system bonds to...
$209.99
|
Sterling 94u 1000 Low Voc Primer Quart . Part of Sterling's Linear Polyurethane SystemUnlike U-1000, its predecessor, this white primer is higher in solids, covers better, requires fewer coats and shrinks less. Best primer for brush application. Finish sand with 220 grit for a fine topcoat...
$129.99
|
Hazard Shipping
