3m Red Abrasive Stikit Sheet Rolls Roll, 2 3/4" X 25 Yd, P180 . Abrasive sheets used for blocking filler and putty that can be cut desired length for use on file shoes and sanding blocks. Abrasive Backing Type: Paper Abrasive Backing Weight: A Weight Abrasive Mineral Type:Aluminum Oxide...
$31.99
|
3m White Fre Cut Sandpaper (sc) 220a Grit Sheet . Resists loading to last longerA high-quality dry sandpaper that resists loading when sanding fiberglass, metal or wood. For dry sanding only, by hand or with an electric sander. Silicon carbide or aluminum oxide abrasive. Paper weight is graded...
$1.79
|
3m White Fre Cut Sandpaper (sc) 100c Grit Sheet . Resists loading to last longer A high-quality dry sandpaper that resists loading when sanding fiberglass, metal or wood. For dry sanding only, by hand or with an electric sander. Silicon carbide or aluminum oxide abrasive. Paper weight is graded...
$1.99
|
3m Abrasives . SPAPR-Stikit P400 2 3/4in.|SPAPR-Stikit P400 2 3/4in.
$72.99
|
3m 3m Silicon Carbide Sheet 415n . Especially suited to wood and sealer sanding A silicone carbide, open coat, A weight sheet that is especially suited to wood and sealer sanding. The product is stearated and resin bonded, and is available in grades 240 and finer. Conforms for contour sanding...
$2.49
|
3m Wet/dry Sandpaper (sc) 100c Grit . Sharp, synthetic, silicon carbide cuts fast to dry or wet sand between coats of varnish, paint, and other finishes; or to sand metal for repainting or prior primer coat. Use with water to reduce clogging and extend abrasive life This 9 x 11 100C Grit
$2.79
|
3m Wet Or Dry Sandpaper Wet/dry (sc) 120c Grit . Excellent rate-of-cut, longevity, flexibility and uniformity of finish. For new surfaces, burnishing old finishes and feathering fine edges. Silicon carbide (SC) or aluminum oxide (AO) abrasive. Paper weight graded A to F (A being the lightest)....
$2.59
|
3m Wetordry Finishing Sandpaper Very Fine 240 Grit, 5 Pack . Ideal for wet sanding between coats of varnish, paint and other finishes. Made with silicon carbide, a sharp synthetic mineral that cuts fast and is satin smooth Five pack
$5.99
|
3m 80 Grit Single Sandblaster 20000 Pack Assortment . Specially coated to resist clogging, this tough sandpaper stays significantly sharper longer-sanding faster than comparable grit. Suitable for dry sanding most surfaces including paint, wood, metal, plastic and fiberglass. Excellent for...
$4.79
|
3m Sandpaper Wet/dry 400 (5) . Ideal for wet sanding between coats of varnish, paint and other finishes. Made with silicon carbide, a sharp synthetic mineral that cuts fast and is satin smooth. 400 GritFive pack
$5.99
|
3m 1500a Grit, Wet Dry . Sharp, synthetic silicon carbide cuts fast and smooth for wet or dry sanding between coats of varnish, paint or other finishes, sanding metal for repainting or prior primer coat, and wet finishing of plastic/fiberglass and top coats. Use with water to red uce clogging...
$1.89
|
Sign In
