Blue Sea Systems Feed Through Terminals 3/8", 250a Rating, 2" X 1" Base, Black . Feed-through terminals are ideal for passing high-current cables through hulls, decks and bulkheads where watertight or vapor-proof integrity must be maintained. These terminals also eliminate chafing and provide...
$23.99
|
Blue Sea Systems Power Post Single Terminal Connectors Connector, 3/8" Stud Size, 2.5" Mount Hole Center . Single stainless-steel stud connects up to three ring terminals the maximum allowed by ABYC. These devices do not have a current rating as the electrical path is through the ring terminal...
$12.49
|
Blue Sea Systems Powerpost Plus 150a Plus, 8 Screw+ Circuits, 3/8" 16 Stud Size . Single large center stud accepts large battery cables. Tin-plated copper circular bus with eight 8-32 screws distributes power to smaller circuit wires. Red insulator boot included. Terminal Material: Stainless...
$24.99
|
Blue Sea Systems Dual Powerpost Cable Connectors Connector, 5/16" 3/8" Studs . New connectors provide a termination point for extending the length of outboard harnesses or other conductors. Models 10093912 and 10093920 are designed for connecting high amp conductors Model 10093938 is designed...
$16.99
|
Blue Sea Systems Cablecap Stud Insulators (pack Of 1), Fits 3/0 4/0 Cable, Red . These simple boots cover positive terminals with an insulating layer of PVC, greatly reducing the chances of accidental shorting with a screwdriver, wrench, etc. and accidental 12V welding. Use with inverters,...
$2.89
|
Blue Sea Systems Powerbar 600a 600a, 8 Stud Circuits, 3/8" 16 Size, 11 1/4" l X 2"h . The highest amperage bus connector available! 3/8" studs on a tin-plated copper bus. Designed for use as a main DC negative or positive bus on larger boats. Terminal Material: Stainless Steel DC Rating: 600A48V...
$134.99
|
Blue Sea Systems Busbar 150a Busbar, 4 Stud Circuits, 1/4" Terminal Size, 6"l X 1.25"w . The standard marine busbar for consolidating positive or negative wires. Tin-plated copper bus bar with #8-32 terminal screws and two 1/4-20 terminal studs or with four 1/4-20 studs only. DC Rating: 150A48V...
$23.99
|
Blue Sea Systems Minibus 100a Bar 100a, 4 Screw+ Circuits, 32 Stud Terminal, 4.2"l X 0.875"w . Single small bus for consolidating positive or negative wires in tight spaces. Tin-plated copper bus with five #8-32 terminal screws and two #10-24 terminal studs. Terminal Material and Size: Stainless...
$12.49
|
Blue Sea Systems Hub Fuse Block, Safetyhub150 . The SafetyHub fuse blocks combine an ignition-protected fuse block and integrated connecting plugs, consolidating up to ten circuits from 1A 200A, eliminating loose wires, and protecting fuses from explosive fumes. The SafetyHub is ideal for...
$124.99
|
Blue Sea Systems Terminal Fuse Blocks Block, 3/8" Mounting Hole, 2 Studs . New isolated stud design uses standard 5/16" hardware and permits stacking of terminals Compact, high-amp fuse Appropriate for DC Main, inverter, windlass, and bow thruster circuit protection Provides high current...
$29.99
|
Blue Sea Systems Rib Insulator Independent Connectors 20a Ac/dc, 300v, 0.875" Wide, #6 Screws, 10 Circuits, 3.66" Length . Closed back design insulates power from mounting surface. Ribs provide partial insulation to each circuit. Each screw pair is one isolated circuit. Optional jumpers allow...
$9.49
|
