Sign In
DAVIS INSTRUMENTS
FSR Fiberglass Stain Remover
We Won't Be Beat—Low Price Guarantee
West Marine will gladly match most U.S. based competitor's price on identical, in-stock items within 30 days of purchase.
Learn More
FSR Fiberglass Stain Remover
Unique gel formula chemically removes stains with no rubbing required. Just brush on to the affected area, wait a few minutes, and viola —the stain is gone! Ideal for removing oil, rust, exhaust, waterline and transom stains. It's non-abrasive and is safe to use on white painted surfaces as well as on gel-coat.
- Works chemically, —no rubbing required
- 16oz. tub or 2 liter jug
REVIEW SNAPSHOT®
by PowerReviews(based on 9 reviews)
Ratings Distribution
88%
of respondents would recommend this to a friend.
Pros
- Easy to use (8)
- Visually pleasing (3)
Cons
Best Uses
- Reviewer Profile:
- Casual/ recreational (5), Advanced (4)
Reviewed by 9 customers
Sort by
Displaying reviews 1-9
Pros
- Easy to Use
- Gel doesn't waste product
- Gel targets stains easily
Cons
Best Uses
- Hull and transom
Comments about FSR Fiberglass Stain Remover:
I used the product on a old cabin cruiser I just bought that hadn't been cleaned in years. I applied it around the transom and under drains on rust and other stains. It took out all the stains after several minutes. The gel makes it easy to target the stain and not waste product.
Pros
- Easy to Use
- Visually Pleasing
Cons
Best Uses
Comments about FSR Fiberglass Stain Remover:
Removed 4-5 years of water stains with a single application.
Due to an injury I wasn't up to hand washing & waxing my boat for 4 years. Dug out a half a container of FSR that was at least 5 yrs old, and used it today. It took my solid white boat back to its original appearance with a single LITE application.
Highly recommend applying with a quality paint brush. Other applicators seem to waist material. I have a 16'4", WIDE beam, DEEP V center console, and can treat my entire outer hull with 1/2 - 2/3 of a 16oz container.
If you wash your boat with a soft brush, or rag before applying FSR there doesn't seem to be any benefit in applying a heavy coat.
Do the boat in sections as you would with wax. This product has to be washed / wiped off after it dries, but if left on for TOO long in the sun it's more difficult to wash off.
A HEAVY coat, or coats of wax should be applied after the stains are removed. If the wax is maintained I normally only need to use this stuff once per year.
Pros
- Easy to Use
Cons
Best Uses
- Jet Ski
- Shower stalls at home
Comments about Davis Instruments FSR Fiberglass Stain Remover:
FSR makes a tough job of cleaning the jet ski's hull an easy one with great results.
Pros
- Easy to Use
- Fast acting and effective
Cons
- Wear latex gloves
Best Uses
- Below water line
- Tough fiberglass stains
Comments about Davis Instruments FSR Fiberglass Stain Remover:
I tried this product on the hull below the water line after my boat was moored for several weeks down in Baja. The yellow stains completely disappeared with FSR. Just wipe it on with a dampened sponge, wait a few seconds, and then rinse away the stains. Amazing stuff, but I would recommend a good wax follow-up after using.
Bottom Line Yes, I would recommend this to a friend
Images shared by Millertime
Was this review helpful? Yes / No
- You may also flag this review
Pros
- Easy to Use
- Visually Pleasing
Cons
Best Uses
Comments about Davis Instruments FSR Fiberglass Stain Remover:
This is a great stain remover! I probably abuse it, but my 23 foot cuddy cabin stays white as can be. I highly recommend it.
Pros
- Easy to Use
Cons
- Messy
- Wear eye protection
Best Uses
- Fiberglass surfaces
Comments about Davis Instruments FSR Fiberglass Stain Remover:
Our 10 yr old skiboat is in the water from Fri pm to Sun pm most weekends. Even thou I clean the hull every Sun, it still gets dingy over time. I use FSR once a month and it removes all the staining with one application. Wipe it on, spray it off.
Pros
- Easy to Use
Cons
Best Uses
Comments about Davis Instruments FSR Fiberglass Stain Remover:
Fantastic for getting out stains on fiberglass
Pros
- Easy to Use
- Visually Pleasing
Cons
Best Uses
- Outdoor
Comments about Davis Instruments FSR Fiberglass Stain Remover:
The Best product of this kind I have ever used. Plan to use more. Will order a larger quanity next time.
Pros
Cons
- Ineffective
Best Uses
Comments about FSR Fiberglass Stain Remover:
Not effective on more difficult fiberglass water stains.
Displaying reviews 1-9
FSR Fiberglass Stain Remover
Product Specs
The West Advisor
The West Advisor articles have answered boaters' questions and provided solutions to boating problems for more than 20 years. West Marine has compiled one of the Web's most comprehensive collections of technical boating information articles.
