PETTIT PAINTS
Easypoxy 1-Part Polyurethane Enamel Paint
We Won't Be Beat—Low Price Guarantee
West Marine will gladly match most U.S. based competitor's price on identical, in-stock items within 30 days of purchase.
Learn More
Earn up to 4% back on this purchase! Learn More
Easypoxy 1 Part Polyurethane Enamel Paint
A one-part blend of urethane, silicone and alkyd products. It flows out to a smooth, sleek finish with excellent hiding characteristics. Even brushed or rolled, it gives the high gloss appearance of being sprayed on. For best results, prime surface with Easypoxy White Undercoater. Great for fiberglass, wood or metal.
- Base Formulation: One-part polyurethane/silicone modified alkyd enamel
- Recommended Application Method: Brush, roller, conventional/airless spray
- Number of Coats Recommended: Two or more
- Drying Time: To touch: 1 1/2 to 6 hrs.; To overcoat: 8 to 24 hrs.
- Primer Needed: Easypoxy White Undercoater
- Coverage: 600 sq.ft/gal. when brushed
- Thinner: 120 - Model 249961; 121 - Model 249995
REVIEW SNAPSHOT®
by PowerReviews(based on 8 reviews)
Ratings Distribution
88%
of respondents would recommend this to a friend.
Pros
- Easy to use (5)
- Visually pleasing (5)
- Protects well (4)
Cons
Best Uses
- Outdoors (5)
- Reviewer Profile:
- Casual/ recreational (3)
Reviewed by 8 customers
Sort by
Displaying reviews 1-8
Pros
Cons
- Difficult to Use
- Mix well as color varies
Best Uses
- Outdoor
Comments about Pettit Easypoxy 1 Part Polyurethane Enamel Paint:
I was disappointed with this paint, the color varied and when put on with thin coats as instructed and later wet sanded and buffed you can see difference in color as underlying layers are exsposed, also they say to sand with too coarse 220 grit paper causing sand scratches to show thru,should be wet sanded with 800 grit. the paint took 3-4 days to dry before being able to wet sand it.Paint was sprayed and had to be thinned and fish eye's were a problem.thinner was over priced.
Pros
- Easy to Use
- Visually Pleasing
Cons
- Does not cover cracks
Best Uses
- Outdoor
Comments about Pettit Easypoxy 1 Part Polyurethane Enamel Paint:
Used on 1977 catalina 22 entire topside. After partial coat with this product it was apparent all the crazing was showing through. Stopped and put down petit undercoat product, in some places two layers. Then did this finishing product. Came out very nice. 1-2 coats undercoat (2-3 quarts net), 2 coats topcoat (2 quarts).
Pros
- Easy to Use
- Protects Well
- Visually Pleasing
- Weather Proof
Cons
Best Uses
- Outdoor
Comments about Pettit Easypoxy 1 Part Polyurethane Enamel Paint:
Much thinner than base coat I used before applying this product. Goes on very easily with roller.
Pros
- Easy to Use
- Protects Well
- Visually Pleasing
Cons
- None
Best Uses
- Outdoor
Comments about Pettit Easypoxy 1 Part Polyurethane Enamel Paint:
Painted trim on boat. Looks Great!
Pros
- Easy to Use
- Protects Well
- Visually Pleasing
Cons
- None
Best Uses
- Outdoor
Comments about Pettit Easypoxy 1 Part Polyurethane Enamel Paint:
Painted the trim on my boat. Looks Great!
Pros
- Easy to Use
- Holds up great
- Protects Well
- Visually Pleasing
- Weather Proof
Cons
Best Uses
Comments about Pettit Easypoxy 1 Part Polyurethane Enamel Paint:
very easy to use, but is a lot lighter color then i thought it would be
Pros
- Color retention
- Durable
- Excellent gloss
Cons
Best Uses
- Fiberglas Surfaces
Comments about Pettit Easypoxy 1 Part Polyurethane Enamel Paint:
We took on the task of painting the exterior of our 43 footer. We're in a covered slip so no spraying. Like any painting project preparation is key. We sanded the gelcoat, filled holes and sratches with bondo and then used the Pettit without a primer.
We found excellent coverage with very good pigment content. We used bright white, so some areas over black required a second coat. This was anticipated and well within our expectations. We rolled the paint and then back brushed to even it out. The paint flowed very well and dried very smooth.
We found using a mohair roller helped reduce the bubbles caused by a standard roller. This helped coverage. We also found painting over 90 degrees air temp did not let it flow well before drying.
We ran low on the black for our stripe around the bridge. To save a buck we used another brand paint. What a disappointment. Had to sand it off and get some more Pettit.
Overall we could not be happier with the Pettit. Like any paint you need to wipe down after salt water and wash to prevent mineral spots. Again this is expected.
Happy boating.
Pros
- Excellent gloss
Cons
Best Uses
- Metal Surfaces
Comments about Pettit Easypoxy 1 Part Polyurethane Enamel Paint:
Excellent finish, even brushed on.
Displaying reviews 1-8
Easypoxy 1 Part Polyurethane Enamel Paint
Product Specs
The West Advisor
The West Advisor articles have answered boaters' questions and provided solutions to boating problems for more than 20 years. West Marine has compiled one of the Web's most comprehensive collections of technical boating information articles.
