Sign In
INTERLUX
InterProtect® 2000E Barrier Coat System
We Won't Be Beat—Low Price Guarantee
West Marine will gladly match most U.S. based competitor's price on identical, in-stock items within 30 days of purchase.
Learn More
InterProtect 2000E Barrier Coat System
InterProtect® 2000E is a unique two-part epoxy coating developed to protect new and used fiberglass hulls from water absorption which can lead to poor hull performance and osmotic blistering. Formulated with Micro-plates® that create an overlapping barrier to eliminate any direct path for water migration. In addition to use as a barrier coat, Interprotect 2000E is also an excellent fiberglass topside primer.
Quart and Gallon Kits are offered and consist of separate containers of base and reactor. When mixed, kits yield either a quart or a gallon. We also offer, as separate purchases, “short-pour” 3-gallon containers and separate containers of reactor, which when mixed yield three full gallons. The low-VOC formulation, Interprotect 2000VOC, meets all VOC regulations and can be applied in any air quality management district.
- Total Thickness Required: Above waterline: 2 coats; below waterline: 4–5 coats (10 mil minimum)
- Drying Time: To overcoat: 3 hrs.–6 months @ 73°F (time period applies to overcoating with InterProtect 2000E; min./max. time to overcoat varies with temperature and substance applied, that is, bottom paint, filler, etc.)
- Coverage: Brush: 60sq.ft/qt., 240sq.ft./ gal.; spray: 45sq.ft./qt., 180sq.ft./gal.
- Application Methods: Brush, roller, airless/conventional spray
- Thinner: Interlux 2316N (Model 198598), (10% reduction limit)
REVIEW SNAPSHOT®
by PowerReviews(based on 2 reviews)
Ratings Distribution
Reviewed by 2 customers
Sort by
Displaying reviews 1-2
Pros
- Protects Well
- Sands well
- Weather Proof
Cons
Best Uses
- Boat bottom
Comments about Interlux InterProtect 2000E Barrier Coat System:
While the 2000E is a little soft for high polishing (2000 grit) it still makes a great bottom coat for a trailer racer (sailboat). A very fine foam roller is a good applicator. It just takes too much paint to get the airless sprayer set correctly.
The left over product can used as a paint on just about anything needing painting (outdoor furniture, mailboxes, mowerdeck, kids' wagon, etc).
Pros
- Durable
- Easy application
Cons
Best Uses
- Fiberglas Surfaces
- Reinforcing and coating
Comments about InterProtect 2000E Barrier Coat System:
In 1997, I spent 30 days removing the copper-based bottom paint because we trailer our boat and did not require the antifouling properties. I filled in every nick, repaired a small crack and washed down the hull with solvent. Preparation is everything.
It only took six hours to apply six coats with a compressor and spray gun. The results were perfect. It has been maintenance free for over 13 years. Due to the boat being 41 years old, there are now a few imperfections that need attending. This is natural for her age.
If you trailer your boat and have antifouling bottom paint, do yourself a favor - remove the paint and seal your hull with this product.
Displaying reviews 1-2
InterProtect 2000E Barrier Coat System
Product Specs
The West Advisor
The West Advisor articles have answered boaters' questions and provided solutions to boating problems for more than 20 years. West Marine has compiled one of the Web's most comprehensive collections of technical boating information articles.
