No image available
No image available
Your request is being processed.
Shopping Cart Shopping Cart

Garboard Drain Plug, Drain Plug Wrench, Garboard Drain Plugs (p323)

12V Marine Blowers
  • 12V Marine Blowers
  • Engine Systems > Horns > Wipers & Blowers > Blowers
  • $64.99 - 172.99 USD
Jabsco 12v Marine Blowers 3" Flexmount Blower, 4.3a12v Draw, 5 1/2"h 6 3/4"w 5"l, 105 Cfm . Tough, reinforced plastic housings and corrosion-resistant materials offer maximum durability in marine environments. Flangemount Blowers are of a radial design which gives the highest output in more...
Brand: Jabsco
Par Marine Blowers
  • Par Marine Blowers
  • Engine Systems > Horns > Wipers & Blowers > Blowers
  • $177.99 - 309.99 USD
Jabsco Par Marine Blowers 140 Cub/min, 115v Ac, 3" 2 3/4" Out, 8 3/8"l X 6 5/8"w 7 5/8"h . Designed to remove gasoline vapors from enclosures, these blowers are also a medium-duty, versatile means of exhausting warm air from galleys and engine rooms, ventilating odors or steam from heads and...
Brand: Jabsco
Blower Intake Screen
Jabsco Blower Intake Screen . Slips over the inlet on all PAR 3'' blowers. Fine mesh screen keeps foreign objects from damaging the blower wheel Chrome-plated bezel and stainless steel screen
Brand: Jabsco
Coupler, 3IN Ventilation Hose
Beckson Marine Coupler, 3in Ventilation Hose . For 3'' vent hose. Designed for attaching ventilation hose to deck
Brand: Beckson Marine
Flexmount Blowers 3" ID Hose
Jabsco Flexmount Blowers 3" Id Hose 150 Cfm. Hose, 115volt . High volume air intake or extraction blowers for engine room fuel compartment, galley or heads. Connections: for 75mm (3 ) ducting Dimensions: - 200mm long, 230mm high, 220mm wide Fuse Size: - 5 amp Maximum Current: - 3.3 amp Output:...
Brand: Jabsco
Waterproof In Line Blowers
Rule Industries Waterproof Line Blowers 3" Id Hose 13.6 Vdc 135 Cfm . For ventilating bilges, engine compartments, galleys and heads. Water-resistant, quiet blowers offer high air flow and low amp draw. Compact and easy to install. The front and rear shaft seals permit slip-on inlet and outlet...
Brand: Rule Industries
Turbo Blower
  • Turbo Blower
  • Engine Systems > Horns > Wipers & Blowers > Blowers
  • $37.99 - 39.99 USD
Attwood Turbo Blower . Designed using aerospace technology to be the most efficient in-line-type blowers on the market. In independent testing at Western Michigan University, these blowers were proven to be as much as four times more efficient than other in-line models. In addition, they're...
Brand: Attwood
Twist on Hose Flange 3"
West Marine Twist On Hose Flange 3" . The unique design of this vent hose flange permits you to install hose from topside. Simply turn the flange into spiral wind of hose, then pass hose through deck hole and mount ventilator. Secure connection without hose clamps. Made of black polyethylene....
Brand: West Marine
240 24V 100mm (4") In line Blower
Rule Industries 240 24v 100mm (4") Line Blower . Connections: - for 100mm (4") ducting Dimensions: - 130mm long, 120mm high, 150mm wide Fuse Size: - 4 amp Output: - 6.7 cu.m/minute Efficient high volume air flow Continuous duty Quiet running Slip-on inlet and outlet ducting connections Made in...
Brand: Rule Industries
250 CFM Heavy Duty Flex Mount Blower 4"
Jabsco 250 Cfm Heavy Duty Flex Mount Blower 4" . Jabsco heavy duty flex mount blowers are designed to remove fumes from the engine compartments of gasoline powered boats prior to start-up and therefore conform to ISO 8846 Marine and USCG Regulations for ignition protection. Extended life 10,000...
Brand: Jabsco
Drain Plug Wrench
  • Drain Plug Wrench
  • Engine Systems > Horns > Wipers & Blowers > Drain Plugs
  • $12.99 USD
Braid Drain Plug Wrench . A multi-use tool that will remove all twist-in drain plugs, while also having a built in compartment to hold spare drain plugs or the one you just took out of the boat in addition to being a floating key holder.
Brand: Braid
Flush Mount Drain for use with Pipe
Perko Flush Mount Drain For Use With Pipe . Cast Plated Cast Bronze Body with Brass Screen The exterior surface of the flange is machined flat and designed to be countersunk into the hull, resulting in a smooth external fit.
Brand: Perko
Transom Drain with Plug
Ronstan Transom Drain With Plug . This chrome-plated drain uses a nylon plug with a rubber gasket. Mounts in a 1" hole, and uses #10 FH fasteners (not included).
Brand: Ronstan
Transom Drain Tubes
  • Transom Drain Tubes
  • Engine Systems > Horns > Wipers & Blowers > Drain Plugs
  • $6.99 - 7.99 USD
West Marine Transom Drain Tubes 1" X 3" . Made from corrosion-resistant brass.
Brand: West Marine
Flip Lock Drain Plugs
West Marine Flip Lock Drain Plugs 1 1/4" Plug, Brass . Standard rubber and stainless-steel or brass plug fits transom drains on many production boats.
Brand: West Marine
Transom Drain Tube & Plug, 5 Spare Plugs & 'o' Rings
Moeller Transom Drain Tube & Plug, 5 Spare Plugs 'o' Rings With ''o'' . This nylon drain tube won't rot, bend or mildew, fits flush to your transom, and allows water to drain when your vessel is trailered. A rubber O-ring makes a watertight seal. Can be loosened with a flat-head screwdriver....
Brand: Moeller
Garboard Drain Plugs
Perko Garboard Drain Plugs Without Pin / Backing Plate . All styles have a nut-type plug with 1/2" NPT threads for a watertight fit. All are cast bronze for corrosion resistance, with a 2" OD flange predrilled and countersunk for #8 screws. Some styles have a stainless pin for easier plug...
Brand: Perko
Push Together Scupper
T H Marine Push Together Scupper . Snap-lock mating ribs pieces together for a secure installation. The male portion can be shortened, to accommodate thinner hulls. For hulls from 1-1/2" to 3-5/8" Installs in 1-7/8" hole Flange O.D.: 2-15/16" White
Brand: T H Marine
Rubber Drain Plugs
  • Rubber Drain Plugs
  • Engine Systems > Horns > Wipers & Blowers > Drain Plugs
  • $5.99 - 7.99 USD
West Marine Rubber Drain Plugs Plug, 1/2" . These expanding rubber plugs are great for livewell tanks, buoyancy tanks on day sailers, and small thru-hulls. Made from brass and neoprene. Cam-action lever Sold in pairs Sh Wt .5
Brand: West Marine
Garboard Drain Plug
  • Garboard Drain Plug
  • Engine Systems > Horns > Wipers & Blowers > Drain Plugs
  • $8.99 - 17.99 USD
West Marine Garboard Drain Plug With . Allows quick drainage of boat when hauled out. 1/2" NPT tapered pipe threads ensure a watertight fit. Cast brass construction Flange diameter is 2" and is drilled and countersunk for #8 screws Neck depth: 3/8"
Brand: West Marine
T Hull Scupper 1.5 Inches
Perko T Hull Scupper 1.5 Inches . Thru-Hull Scupper with Recessed Flapper, Molded White Plastic, Soft Black Flapper Valve. Complete with Nut and Mounting Hardware For Mounting Through the Transom
Brand: Perko
Flapper Scupper Repair Kit
T H Marine Flapper Scupper Repair Kit . Flapper Scupper Repair Kit 1.5 To 2.0in.
Brand: T H Marine
Flow Max Ball Scupper
T H Marine Flow Max Ball Scupper . Positive sealing ball scupper with twist-off design makes clearing debris a snap. Simply twist to remove ball cavity. Includes stainless steel security pin, multiple mounting holes and a neutral buoyancy ball that won t float up and break the seal. Meets all...
Brand: T H Marine
T Handle Drain Plugs
West Marine Handle Drain Plugs 1'' Plugs, Brass . Standard T-handle stainless-steel and brass plugs for 1" and 1-1/4" transom drains on many production boats.
Brand: West Marine
Stainless Steel Garboard Drain Plug
Attwood Stainless Steel Garboard Drain Plug . Threaded removeable plug. Retention system keeps plug from getting lost. Large 7/8" (27mm) hole for servicing stern drives. Highly polished 316 stainless steel. Lifetime warranty.
Brand: Attwood
Transom Drain with Plug
Seafit Transom Drain With Plug . All-nylon drain and plug with a plastic retainer. Mounts in a 15/16" hole, and uses #10 FH fasteners.
Brand: Seafit
Motorwell Drain Tube
Moeller Motorwell Drain Tube . This durable plastic drain tube won't rot, bend or mildew, and is ideal for use in your motorwell, livewell or baitwell. Concentric rings lock in place for a tight, leak-proof seal Fits 1'' diameter openings and bulkheads from 3/4'' to 2 1/2'' thick
Brand: Moeller
Garboard Drain Plug
  • Garboard Drain Plug
  • Engine Systems > Horns > Wipers & Blowers > Drain Plugs
  • $84.99 - 99.99 USD
Perko Garboard Drain Plug . Cast Bronze Flange Brass Plug Complete with Zinc Plated Steel Wrench Pipe Size: 1" Threaded Neck Length: 1" Flange Outer Diamter: 3-1/8"
Brand: Perko
Garboard Drain Plug
  • Garboard Drain Plug
  • Engine Systems > Horns > Wipers & Blowers > Drain Plugs
  • $74.99 - 89.99 USD
Perko Garboard Drain Plug . Cast bronze construction. Twist plug has 3/4'' NPT tapered pipe threads. Flange has a 1 1/4'' threaded neck, which fits hulls to 3/4'' thick Flange diameter is 2 3/8''
Brand: Perko
Deck and Baitwell Drain Plug, Flip Lock
Moeller Deck And Baitwell Drain Plug, Flip Lock . For livewells and baitwells. Cam-action plug snaps into leak-proof, non-slip position. Available in various sizes to fit all I.D. openings in through-hull fittings. Stopper is adjustable. Brass cam Stainless steel top and bottom plate Neoprene...
Brand: Moeller



© West Marine All Rights Reserved p-wcsapp02.westmarine.net