No image available
No image available
Your request is being processed.
Shopping Cart Shopping Cart

5", 9, Pre Cut for Raymarine 9, Stud Terminals, Pre Cut for Furuno MFD12 (p287)

Pre Cut for Furuno MFD12
Navpod Pre Cut For Furuno Mfd12 . Pre-Cut for Furuno MFD12. Versitile 20/40 Swivel Base, Choice of 20 or 40 Degree tilt angle. Super Strong Swivel Tube. Allows left to right swivel action. Double seal for watertight integrity.
Brand: Navpod
Pre Cut for Raymarine 9.5" C120W
Navpod Pre Cut For Raymarine 9.5" C120w . Pre-Cut for Raymarine 9.5" C120W. Built to complement the latest Marine Electronics. Double seal for watertight intergrity, tamperproof fasteners and polished stainless steel.
Brand: Navpod
PreCut for Raymarine i70, ST60, Garmin GMI10, Furuno F150 or Simrad IS20.
Navpod Precut For Raymarine I70, St60, Garmin Gmi10, Furuno F150 Simrad Is20. . PowerPods are a better way to mount your Radar, Chartplotter or Fishfinder. PowerPods feature a swivel base with a choice of 20 or 40 mounting angle. Allows left-to-right swivel action for the best viewing angle of...
Brand: Navpod
Radar Pod, 9.5"
  • Radar Pod, 9.5"
  • Electronics > GPS > Radar & Weather > Fixed-Mount GPS Accessories
  • $239.99 USD
Navpod Radar Pod, 9.5" . Radar/Chartplotter NavPod - Uncut (usable face = 14"w x 8.375"h)
Brand: Navpod
SK135 Power Mount Stanchion Kit
Navpod Sk135 Power Mount Stanchion Kit . Stainless-steel mount adapts Instrument NavPods or Radar/Chartplotter NavPods to flat surfaces for powerboat applications. For GP1051, GP1061, GP1151, CP10, GP1170. Two stainless tubes with stainless feet, 20 bend. 1.25"dia. x 15"H.
Brand: Navpod
NavPod SK145 Stanchion Kit
Navpod Sk145 Stanchion Kit . SK145 Stanchion Kit The SK145 allows you to better position the display for multiple viewing angles. However, the single mounting foot limits the available room for wires and some larger diameter Radar cables won t fit through the base. Y shaped 1.25" diameter tube...
Brand: Navpod
Stanchion Kit 39" Wide. 1.25" dia. Stainless Steel Tube (includes stainless steel feet)
Navpod Stanchion Kit 39" Wide. 1.25" Dia. Stainless Steel Tube (includes Feet) . StanchionKit - Companion WayPods - 1.25 diameter stainless steel tube, polished and pre-drilled (includes stainless steel feet) for use with CWP320 & CWP420 CompanionwayPod
Brand: Navpod
Super SailPod
  • Super SailPod
  • Electronics > Boat Instruments > Electronics Mounts
  • $499.99 USD
Navpod Super Sailpod . Good for 4 instruments and Radar / Chartplotter. Made to fit on 12" wide AngleGuards. For best results use AG216 AngleGuard.
Brand: Navpod
NavPod Tamperpruff Wrench Set
Navpod Tamperpruff Wrench Set . NavPod Tamperproof Wrench Set (2.5 , 6 , and 6 T handle)
Brand: Navpod
Un Cut Flush Front, 9.5"
Navpod Un Cut Flush Front, 9.5" . 9.5" Un-Cut Flush Front. Grand Prix series outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. Polished stainless steel tamperproof fasteners. NavPod allows you to...
Brand: Navpod
Backstay Handle Holder
Navtec Backstay Handle Holder . Holds backstay adjuster handle close to the mounting surface for easy accessibility and to prevent accidental pumping, line fouling and injury. Accepts Navtec System 50 and System VII pump handles; will not accept titanium two-speed pump handles.
Brand: Navtec
Cones for 1x19 Wire
  • Cones for 1x19 Wire
  • Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
  • $5.49 - 15.49 USD
Navtec Cones For 1x19 Wire Cone, 5/16" Diameter . Cones for 1x19 wire (cones for 7-Strand and Dyform available only through Special Order).
Brand: Navtec
Cupples
  • Cupples
  • Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
  • $3.19 - 3.79 USD
Navtec Cupples Stainless Steel Cupple, 7/32" Wire Diameter . Navtec cupples for Norseman Rigging Terminals. Norseman Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools...
Brand: Navtec
Extra Long Stud Terminals
Navtec Extra Long Stud Terminals Terminal, 1/4" Wire Diam., 1/2" Thread Size, 7 Length . Norseman Swageless Stud Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and...
Brand: Navtec
HF 8, Jaw Terminal for Rod
Navtec Hf 8, Jaw Terminal For Rod . Used as upper and lower terminals on rod backstays. Also used on low-fatigue assemblies like bobstays.
Brand: Navtec
Integral Hydraulic Backstay Adjusters
Navtec Integral Hydraulic Backstay Adjusters Adjuster, 1/2" Piston Size, 5400 Max. Force At Std. Relief Valve Setting, 9/32" 1x19 Wire Pin Dia, 44.3" Length Open, 30.8" Closed, 13.5" Stroke . Self-contained hydraulic adjusters feature a longer pump handle that produces a faster pumping motion...
Brand: Navtec
Norseman Swageless Eye Terminals
Navtec Norseman Swageless Eye Terminals Terminal, 3/16" Wire Dia., 3/8" Id Pin Size, 1/8" Length . May be hand fitted without the use of special tools. Simply slip the body of the terminal over the full diameter of the cable. Unlay the outer wires and fit the cone over the center core. Re-lay...
Brand: Navtec
Norseman Swageless Fork Terminals
Navtec Norseman Swageless Fork Terminals Terminal, 1/4" Wire Dia., 1/2" Eye Id Pin Size, 5/8" Length . Norseman Swageless Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special...
Brand: Navtec
Replacement Turnbuckle Screws
Navtec Replacement Turnbuckle Screws Standard Screw, 7/16" . These replacement screws fit C500 turnbuckles. Available in standard or extra long length Nickel-plated bronze
Brand: Navtec
Rigging Insulators
  • Rigging Insulators
  • Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
  • $264.99 - 274.99 USD
Navtec Rigging Insulators Insulator, 5/16in Wire Assembl . Insulators to protect wire terminals.
Brand: Navtec
Stemball Fittings
  • Stemball Fittings
  • Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
  • $7.29 - 54.99 USD
Navtec Stemball Fittings Swage, 5/16in . Electro-polished 316 stainless steel.
Brand: Navtec
Stud Terminals
  • Stud Terminals
  • Sailboat Hardware > Mast & Standing Rigging > Rigging Terminals
  • $41.99 - 114.99 USD
Navtec Stud Terminals Terminal, 3/16" Wire Diam., 5/16" Thread Size, 2 7/8" Length . Norseman Swageless Stud Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and can...
Brand: Navtec
NEP 2 Navico Expansion Port
Nep 2 Navico Expansion Port . A plug-and-play hub for high-speed data-sharing of multiple HDS, LCX, LMS, NSE and GlobalMap products across your onboard network. Waterproof expansion ports resist corrosive marine environments. Unused expansion ports capped for future expansion. Robust 100-megabit...
Brand: Navico
Nevr Dull Metal Polish
Nevr Dull Metal Polish . Easier to use than pastes or liquids"Magic" polishing wads work great for cleaning and polishing all metals aboard. They are easier to use than pastes and unlike liquid polishes, there is nothing to spill. 5oz. 5oz.
Brand: Nevr Dull
1/8" Braided Polyester Cord
New England Ropes 1/8" Braided Polyester Cord Cord, By The Foot . A low-stretch cord that s great for flag halyards, foredeck netting, or light-air spinnaker sheets. Best use: Utility cord, flag halyards Construction: Braided polyester Breaking strength: 530lb. Stretch: 3% at 15% of breaking...
Brand: New England Ropes
3/4" Mega Braid Nylon Line, 50 Feet, Black
New England Ropes 3/4" Mega Braid Nylon Line, 50 Feet, Black . Ideal for dock and anchor lines on large boats because its single-braid construction allows large diameter line to coil and flake easier than any other line. Extremely flexible when slack, it 's immune to kinking or hockling and the...
Brand: New England Ropes
3/4" Mega Braid Nylon Line, 60 Feet, Black
New England Ropes 3/4" Mega Braid Nylon Line, 60 Feet, Black . Ideal for dock and anchor lines on large boats because its single-braid construction allows large diameter line to coil and flake easier than any other line. Extremely flexible when slack, it 's immune to kinking or hockling and the...
Brand: New England Ropes
ARC Abrasion Resistant Cover
New England Ropes Arc Abrasion Resistant Cover Cover, Fits 8 10mm Line, Green Fleck . A hollow braided cover made from a hybrid combination of heat-resistant Technora, Nomex and colored polyester designed to reinforce the cleating or friction-prone areas of single braid runner tails and sheets....
Brand: New England Ropes
Bench Mounted Electric Rope Cutter
New England Ropes Bench Mounted Electric Cutter . Cut and seal in one step Electric rope cutter makes quick work of cutting and heat sealing a rope in one step. Note: Will not melt some high-tech fibers including Vectran and Technora.
Brand: New England Ropes
Braided Polyester Luffline
New England Ropes Braided Polyester Luffline 5/16"dia. Line, 1900lb. Breaking Strength . A very stiff, hard braided polyester line used primarily for luff lines. The 5/16" size is also very popular for sailboard harness loops. Best Use: Luff lines Construction: Double braid Cover...
Brand: New England Ropes



© West Marine All Rights Reserved p-wcsapp01.westmarine.net