Series 368 Low-Permeation Marine Fuel Hose, Sold by the Foot
Fuel hose that makes tight bends and is USCG Type A1-15 compliant
Using the right hose for the job makes all the difference. It speeds up installation and prevents having to go back to re-do the job if a surveyor calls out that fuel line does not meet the requirements. Shields Series 368 hose is the right hose for jobs that must meet USCG Type A1-15 requirements and involve installations with limited clearances. Series 368 is able to make tight radius bends without collapsing and compromising fuel flow. This polyester reinforced hose incorporates a plastic barrier and Nitrile butadiene rubber (NBR) outer layer to limit permeation to comply with EPA and CARB requirements. Available in four sizes, 368 is ideal for fuel feed lines for outboards, inboards, and inboard/outboards using gasoline (up 85% ethanol blends) or diesel (including all bio-diesel blends). Sold by the foot (up to 50' continuous length) so that you can buy only what you need.
Key Features
- Meets USCG Type A1-15 requirements
- EPA and CARB compliant
- Sold by the foot
- Available in four sizes
- UV and Weather resistant for more exposed installations
- Limited lifetime warranty
Specifications
- Fuel Type: Gasoline (up to 85% ethanol), Diesel (all bio-diesel blends)
- Burst Strength: 250 psi
- Construction: Reinforced polyester with plastic barrier and NBR outer layer
- Temperature Range: -20°F to 221°F
- Approvals: Type A1-15, ISO Type A1, SAE J1527, EPA, CARB, NMMA/CE
ID | OD |
---|---|
1/4″ | 1/2″ |
5/16″ | 5/8″ |
3/8″ | 11/16″ |
1/2″ | 13/16″ |