AP70 Autopilot Pack with AP70, AC70 and RF300
PLUS Plan includes:
- Wear and Tear Coverage
- Power Surge Protection
- Exchange for products under $400
- Onboard service on products over $750
- Up to 5 years of total coverage
PLUS plan goes into effect with purchase; no registration required. Purchase online, in stores or call 1 (800) 262-8464.
Get the system you need at a terrific savings.
Value Pack includes AP70 Autopilot Control , AC70 Drive Computer, RF300 Rudder Feedback Unit (without heading sensor). Add your own drive unit (sold separately).
AP70 Autopilot Controller
The AP70 is Simrad's flagship autopilot controller, embedded with the most comprehensive technology from over 60 years of experience. This state-of-the-art, commercial grade autopilot combines an unrivalled adaptive autopilot system with a bright and clear, color display and a user interface designed by captains for captains.
The AP70 Autopilot Control is ideal for both simple installations where International Maritime Organization (IMO) approval is not required, yet can be configured (by matching with an approved computer) to meet the IMO requirements for a Type Approved autopilot. Install the AP70 as a stand-alone display, or network it as a second or third station for ultimate vessel control.
Key Features
- Large Color Display: The 5" diagonal screen is highly visible and easy to read with its vivid color palette
- Smooth Rotary Controller: Adjust your course with ease using the rotary controller, with push to enter functionality
- Easy To Use Interface: An intuitive user interface, designed by captains, with simple menus and dedicated keys ensures that you can alter course and find the information you need quickly and easily
- Rudder Interface Options: Comprehensive range of rudder support options, including dual rudder
- Thruster Integration: Interfaces bow or stern with jets and thrusters
- CAN Bus and NMEA 0183: Network the AP70 via industry standard connectors for ease and simplicity
- Optional Remote Joystick: Choose from a range of optional joysticks and remote levers to enhance your steering experience
AC 70 Autopilot Computer
Drive computer for rudder using reversible motor or non-isolated solenoids and frequency rudder angle feedback. Connection for NFU remote control and one channel IEC 61162-1 (NMEA 0183) RX/TX or IEC 61162-1,2 and 3 compatible.
RF 300 Rudder Feedback Unit
The RF300 is a medium duty rudder feedback unit which connects directly to the Autopilot Pilot Computer using two-wire frequency interface. The RF300 rudder feedback unit contributes towards smooth and accurate auto-steering by determining rudder angle. Used on boats with inboard engines.
Specifications
AP 70
- Display Type: Bonded 16-bit color TFT, CCF backlighting
- Display Size: 5" diagonal
- Screen Resolution: 480 x 480
- Data Interface: CAN Bus, Ethernet, USB
- Voltage: 12/24V DC
- Power Consumption: 0.7/0.4A at 12V DC, 0.4/0.3A at 24V DC
- NMEA 2000 Load Equivalent Number (LEN): 1
- Weight: 2.6lb.
- Dimensions: 9 1/16"W x 5 11/16"H x 2 1/5"D (includes 1 5/8"cutout depth)
- Waterproof Rating: IPX4
AC 70
- Motor/Solenoid Drive: 30A continuous, 50A for 1 sec.
- On/off Solenoid Control of Rudder/Thruster: 12/24V DC, load range 10mA to 10A, off curret <1mA
- Clutch Bypass Current: 0.10mA-3A
- Rudder Angle Frequency Input: 15V, 1.4 to 5kHz, resol. 20Hz/°
- NFU Port/Starboard Input and Mode Indicator Output: External open/close contact, common ret, contact current max 30mA
- External Alarm Output for Buzzer/Relay: Max 100mA, voltage level as local supply
- Electric Vehicle Control Output: CAN via SG05
- Waterproof Rating: IPX2
- Dimensions: 7"W x 8 5/16"L x 2 3/8"
- Mount: Bulkhead
RF300
- Dimensions: 6 15/16" dia. x 2 9/16"H
- Weight: 1.1lb.
- Waterproof Rating: IP56
- Mount: Horizontal, vertical or upside down
- Cable: 33'