Skip to content Skip to navigation menu

GARELICK 4-Stroke Auxiliary Outboard Brackets

Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Rated for long or short shaft engines. Five-position lock bar allows for better range trim adjustment.

  • Maximum Weight: Model #193328: 169 lbs., Model # 3683455: 175 lbs.
  • Style: Adjustable
  • Material: Anodized aluminum body w/ poly-propylene board
  • Attachment Method: Thru-bolt, backing plate
  • Attachment Hardware: Stainless steel bolts included
  • Included Equipment: Motor safety cable
  • Requires: Backing plate, stainless steel nuts & bolts
  • Warranty: Three years
Customer Reviews
Product Models
Description WM Model # MFG Part # Availability Price Quantity  
Auxiliary Outboard Bracket, 9-1/2" Vertical Lift, 7.5hp-30hp HP Rating 193328 71090:01
In stock online.

$299.99

Auxiliary Outboard Bracket, 15-1/2" Vertical Lift, 7.5hp-25hp HP Rating 3683455 71091:01
In stock online.

$369.99

Product Description

Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Rated for long or short shaft engines. Five-position lock bar allows for better range trim adjustment.

  • Maximum Weight: Model #193328: 169 lbs., Model # 3683455: 175 lbs.
  • Style: Adjustable
  • Material: Anodized aluminum body w/ poly-propylene board
  • Attachment Method: Thru-bolt, backing plate
  • Attachment Hardware: Stainless steel bolts included
  • Included Equipment: Motor safety cable
  • Requires: Backing plate, stainless steel nuts & bolts
  • Warranty: Three years

REVIEW SNAPSHOT®

by PowerReviews
Garelick4-Stroke Auxiliary Outboard Brackets
 
3.2

(based on 5 reviews)

Ratings Distribution

  • 5 Stars

     

    (2)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (2)

60%

of respondents would recommend this to a friend.

Pros

No Pros

Cons

No Cons

Best Uses

No Best Uses
    • Reviewer Profile:
    • Advanced (3)

Reviewed by 5 customers

Sort by

Displaying reviews 1-5

Back to top

(1 of 1 customers found this review helpful)

 
5.0

Perfect Addition to my Transom

By Ian

from Phuket, Thailand

About Me Casual/ Recreational

Verified Reviewer

Pros

  • Very Strong

Cons

    Best Uses

    • Supports Stand-by Engine

    Comments about 4-Stroke Auxiliary Outboard Brackets:

    I purchased the Garalick Bracket to support a 100lb emergency stand-by engine (Yamaha FT9.9GMHL High Thrust) for use on my Grady-White 225 Tournament over in Phuket Thailand. Operating on the edge of the Andaman Sea/Indian Ocean....there is no Coast Guard. I wanted a super strong bracket to support my emergency stand-by, just in case the Yamaha F250 dies....The Garalick Bracket is super strong and a perfect addition to my Transom.

     
    5.0

    I would buy this product again

    By Larry

    from Point Breeze, NY

    About Me Advanced

    Verified Buyer

    Pros

    • Good Performance

    Cons

      Best Uses

      • Large Boats

      Comments about Garelick Auxiliary Outboard Bracket, 15-1/2" Vertical Lift, 7.5hp-25hp Rating:

      I'm using it with a 15hp 4 stroke kicker motor that it basically will lift out of the water on its own. I found it to be easy to mount by following the instructions.

      (0 of 1 customers found this review helpful)

       
      1.0

      Poor desieng

      By tractor driver in the sky

      from Dana Point, Ca.

      About Me Advanced

      Pros

        Cons

        • Poor Design

        Best Uses

        • Personal Crafts

        Comments about 4-Stroke Auxiliary Outboard Brackets:

        Sturdy beyond words!....Poor design....Too large and heavy for a 28' sail boat, although the smallest recommended for a four stroke, springs have to be cut to accommodate an 85 lb. 4 stroke motor.... Polly board is too large......At least a 2" spacer is needed to allow handle to clear the transom enough to work at all.

        R. Lawrence

        (6 of 8 customers found this review helpful)

         
        1.0

        Not a good fit for my boat

        By Rob

        from Leesburg VA

        About Me Advanced

        Pros

          Cons

          • Poor Design

          Best Uses

            Comments about 4-Stroke Auxiliary Outboard Brackets:

            Set this up just as in the instructions. The dry fit looked fine but the handle was right up against the transom. I put it in with 3M 5200 and bolts to find that the upper slot cannot be accessed because the handle hits the transom. My transom is straight so this is a design problem and limits the useful range of the bracket. Now I have a bracket that does not work well semi permanently attached to my boat after a lot of work to install it. That sucks!

            (0 of 1 customers found this review helpful)

             
            4.0

            looks robust enough for me

            By Randall

            from Yellowknife

            About Me Casual/ Recreational

            Verified Buyer

            Pros

              Cons

                Best Uses

                  Comments about Garelick Auxiliary Outboard Bracket, 15-1/2" Vertical Lift, 7.5hp-25hp Rating:

                  I'm putting a 4 stroke 15 hp long shaft outboard on my sailboat and this adjustable transom will do the trick.

                  Service and delivery comments:

                  the product was delivered right to my door. I was surprised how far it came from and that it was still in great condition.

                  Displaying reviews 1-5

                  Back to top

                  PRODUCT QUESTIONS
                  1 (800) 262-8464