The ideal low-density filler for creating a light, easily-worked fairing compound especially suited for fairing large areas. Microlight™ mixes with greater ease than #407 Low-Density filler or microballoons and is approximately 30% easier to sand.
The West Advisor
The West Advisor articles have answered boaters' questions and provided solutions to boating problems for more than 20 years. West Marine has compiled one of the Web's most comprehensive collections of technical boating information articles.
Reviewed by 1 customer
Displaying review 1
- Easy to Use
- Protects Well
- Visually Pleasing
- Weather Proof
- Fairing hull appendages
Comments about #410 Microlight Filler:
When thoroughly mixed into resin/hardener, it's easy to control viscosity from soupy to stiff. Goes on easily, spreads easily, needs to be tipped to avoid high spots and low spots, but does level a bit on horizontal surfaces. Can sag on vertical or overhead surfaces, so don't put on too thick in one layer. Sands and fairs well to a fine surface ready for an unfilled epoxy top coat before finishing.