Hullgard Epoxy Primer is a holding primer that combines excellent anticorrosion and water barrier properties with anti-fouling tie-coat functionality. Suitable for below the waterline only, it offers a long overcoating interval without sanding to reduce work time along with superb adhesion to properly prepared fiberglass, steel, aluminum and wood.Can be recoated as soon as the solvents evaporate, even at low temperatures.

• 1 Gal
• Mixed volume 1 US Gallon.
  Theoretical Coverage - 140 Sq. feet/gallon = 3.5 m2/litre at 5.5 mils/135 microns DFT or 360 Sq. feet/ gallon (9m²/lt) at 2 mils/ 50 microns DFT
• Coverage calculations are based on theoretical transfer efficiency of 100%
• Actual coverage rate obtained will vary according to equipment choice, application techniques, part size, and application environment
• Recommended Wet Film Thickness: 12 mils (300 microns) per coat by spray, 4 mils (110 microns) per coat by brush/roller
• Recommended Dry Film Thickness: 5.5 mils (135 microns) per coat by spray, 2 mils (50 microns) per coat by brush/roller
• Number of coats: See application instructions
• Anticipated drying time at 77°F/25°C: 2 hours touch dry; 7 hours hard dry
• Recoatability (At 77°F/ 25°C, 50% RH):
  With Itself: 2 hours (minimum)
• Maximum recoat time without sanding 6 months
• Inspection for cleanliness recommended prior to subsequent
  application
• Ensure dust is removed and remove any dirt pick-up with T0006
• If recoatability time is exceeded abrade using 180 - 220 grit paper
• With Antifouling: Minimum 2 hours by brush/roller or 6 hours by spray at recommended film thickness
• Maximum recoat time 7 hours by brush/roller or 16 hours by spray at recommended film thickness
• VOC: Base (D6070) - 391g/lt or 3.26 lbs/gallon

Product Data Sheet

Related West Advisor Articles

• Bottom Painting
• Topside Painting