360 Imaging™ provides a complete around-the-boat underwater image, with detail similar to Side Imaging (SI). With a single sweep, 360 Imaging has the ability to cover a 300' diameter circle (70,685 square feet). 360 Imaging lets you choose from five beam rotation speed settings. Lower beam speeds lead to higher image quality but lower refresh rates. Conversely, higher beam speeds result in lower image quality but higher refresh rates. With five options, you can find the ideal setting for your boat speed, water conditions and need for detail. Stop in one direction: it allows you to isolate your sweep area over a section of water from 10° to 360°. You can lock in your beam anywhere, but the area in front of your boat is especially useful. Because your transducer has less ground to cover, you'll also benefit from a faster refresh rate. Mark interesting returns with a waypoint directly on your 360 Imaging screen. The exact location will be stored in your unit’s memory and is viewable on GPS cartography. Deploy 360 Imaging using your Humminbird unit or the control buttons found on the 360 Imaging Transducer Deployment System. The transducer drops below your boat’s hull and prop for unobstructed 360° view. Easily set deployment depth based on your prop clearance & it will be stored in the TDS memory. System operates quietly-escaping the notice of the nearby fish. Compatible with Ethernet-ready, Side Imaging-equipped Humminbird fishfinders, including 1198c SI, 998c SI, 898c SI and 798ci HD SI Combos.

• Product Weight: 18.25 lbs.
• Power Draw:
  • At Rest (retracted): 270 mA
  • Deployed: 2.8A
  • Scanning:
    • Typical: 360 mA
    • Fastest Scan Menu: 500mA
    • During Retraction: 2A
• Product Dimensions
  • Length: 51" (fully retracted)
  • Depth: 8"
  • Width: 3.5"

Related West Advisor Articles

• Sonar Transducers
• CHIRP Sonars & Broadband Radar
• Selecting a Fishfinder
• Selecting a GPS Receiver