Sign In
MARTYR
Zinc Rudder & Trim Anodes (with hex-head machine screw)
Product Specs
The West Advisor
The West Advisor articles have answered boaters' questions and provided solutions to boating problems for more than 20 years. West Marine has compiled one of the Web's most comprehensive collections of technical boating information articles.
REVIEW SNAPSHOT®
by PowerReviews(based on 5 reviews)
Ratings Distribution
100%
of respondents would recommend this to a friend.
Pros
- Easy to use (5)
- Protects well (5)
Cons
Best Uses
- Reviewer Profile:
- Casual/ recreational (3)
Reviewed by 5 customers
Sort by
Displaying reviews 1-5
Pros
- Easy to Use
- Protects Well
Cons
Best Uses
- Rudders
- Trim Tabs
Comments about Zinc Rudder & Trim Anodes (with hex head machine screw):
These install easily.
I used them to protect the trim tabs on my boat, but they are suitable for rudder protection as well, depending on the size of your rudders.
After removing the old anodes, be sure to clean the mounting area. I use a brass brush in a drill to do this, and it works great.
If you paint your trim tabs or rudders, mask off the outer surface of the anodes prior to installing them. After they are installed you can paint the trim tabs or rudders, let them dry, and then remove the masking tape to reveal the clean anodes.
Requires an appropriate allen wrench to install. Use blue Locktite on the bolt prior to tightening them. I would have rated these five stars had the bolts been pre-coated with Locktite.
Durability not evaluated. Local conditions will determine the actual life of your anodes. Check them regularly, and replace them every year, regardless of their condition.
Pros
- Easy to Use
- Protects Well
Cons
Best Uses
- Rudder Protection
Comments about Zinc Rudder & Trim Anodes (with hex head machine screw):
These install easily.
Clean the surface to be protected before installing. A brass brush in a power drill works wonderfully.
If you paint your rudders with anti-fouling coatings, be sure to mask off the anodes before installing them. I mask them off and use a razor to trim the excess tape from the perimeter of the anodes before installing them. Makes painting the rudders a snap, and you peel off the masking tape after the paint dries to reveal the clean anodes.
Use blue Locktite on the threads. I would have rated these 5 stars had the bolts been pre-coated with Locktite.
Requires an appropriate sized allen wrench to install them. Tighten securely and replace them annually.
Not evaluated for durability. Remember, conditions in your marina will determine the life of these anodes.
Pros
- Easy to Use
- Protects Well
- Visually Pleasing
- Weather Proof
Cons
Best Uses
Comments about Zinc Rudder & Trim Anodes (with hex head machine screw):
Very easy to install
Pros
- Easy to Use
- Protects Well
- Visually Pleasing
Cons
Best Uses
Comments about Zinc Rudder & Trim Anodes (with hex head machine screw):
Simple to install and only takes a few seconds
Pros
- Easy to Use
- Protects Well
Cons
- Bolt too short for my use
Best Uses
- Keel corrosion protection
Comments about Zinc Rudder & Trim Anodes (with hex head machine screw):
On-line catalog description should have included maximum thickness of clamped surfaces given the supplied bolt.
Displaying reviews 1-5
