This 32' Grand Banks trawler has multiple fuel-burning devices that all need maintenance for safe operation. A CO detector is important insurance in case something goes wrong.
The danger to boaters from carbon monoxide
Carbon Monoxide is a silent killer on houseboats and other recreational vessels. Each year, boaters are killed or injured by carbon monoxide, and virtually all of these poisonings are preventable. We’ll discuss monitoring devices to alert you about this danger, but first, we’ll remind boaters that regular maintenance of your boat’s mechanical systems and proper operation of your boat are the best defenses against carbon monoxide.
Carbon monoxide is an odorless, tasteless, initially non-irritating gas, created by incomplete fossil fuel combustion (due to insufficient oxygen supply to allow complete oxidation to carbon dioxide) in appliances like gas-powered electrical generators, propane stoves or heaters, or your boat’s propulsion engine. Because Carbon Monoxide (CO) is lighter than propane or gasoline vapor, without smell or taste, its presence remains undetected by humans until symptoms of exposure set in.
CO results from incomplete burning of fossil fuels, so we may be exposed to it wherever engines operate (propulsion engines or gas generators) or near open flames (heaters or galley appliances). Exposure time and concentration levels determine what effect, if any, this exposure has on our bodies. Amounts over 100 parts per million are dangerous to human health. A word of caution: typical symptoms of CO exposure could easily be mistaken for seasickness because they trigger dizziness, and nausea. Unlike seasickness, a CO leak can be fatal if it goes undetected. We think this alone warrants the investment in a good CO detector.
CO is easily absorbed into the bloodstream (combining with hemoglobin 200 times more easily than oxygen) where it reduces the blood’s oxygen-carrying ability, leading to hypoxia and causing “suffocation” by the victim. Since the body can accumulate CO, the blood level can gradually increase. Remove the victim of CO exposure to a location with fresh air. Acute exposure is a medical emergency.
Parts Per Million concentrations
Here is what a person’s carboxyl level (COHb), the “parts per million” concentrations of carbon monoxide, mean to your health:
||Slight headache in two to three hours
||Slight headache within two to three hours; loss of judgement
||Frontal headache within one to two hours
||Dizziness, nausea, and convulsions within 45 minutes. Insensible in two hours.
||Headache, dizziness, and nausea within 20 minutes. Death in less than two hours.
||Headache, dizziness and nausea in five to ten minutes. Death within 30 minutes.
||Headache and dizziness in one to two minutes. Death in less than 20 minutes.
||Death in less than three minutes.
U.S. Coast Guard’s tips to avoid CO overexposure
- Operate combustion devices (stoves, heaters, generators) in well-ventilated areas.
- Supplement natural ventilation with fans or forced air. Keep forward-facing hatches open to allow fresh air circulation in accommodation spaces, even in inclement weather
- Close the hatches and set your course away from the path of exhaust fumes when motoring downwind in a following sea.
- Install CO detectors in each cabin. It’s the most effective defense against a potentially fatal problem.
- Avoid any activity on the rear deck, swim platform, and around exhaust pipes while the engine or generator is running.
- CO exposure danger also exists on deck, especially when a boat idles at the dock or seawall where exhaust can accumulate. Even when not running your engine, beware of CO accumulation from other boats that idle at the dock to windward.
We offer two CO Detectors from Fireboy-Xintex. Model 6818892 is single-station for one location only. Model 6818900 allows you to link up to six individual detectors together. It also can automatically shut off your generator.
Inspecting your boat for CO hazards
Take the following actions whenever you use your boat. Do not operate the vessel if any of these problems exist!
- Ensure that all exhaust clamps are in place and secure
- Look for evidence of exhaust leaking from exhaust system components such as rust and/or black streaking, water leaks, corroded or cracked fittings
- Inspect rubber exhaust hoses for burned or cracked sections. All rubber hoses should be pliable and free of kinks.
- Confirm that cooling water flows from the wet exhaust outlet when the engine or generator is started
- Listen for any change in exhaust sound that could indicate a failure of an exhaust component
- Test the operation of each carbon monoxide detector by pressing the test button
At least annually (performed by a qualified marine technician)
- Replace exhaust hoses if any evidence is found of cracking, charring or deterioration
- Inspect each water pump impeller and check the condition of the water pump housing. Replace if necessary.
- Inspect each of the metallic exhaust components for cracks, rust, leaks or looseness. Pay particular attention to the cylinder head, exhaust manifold and water injection elbow.
What to look for in CO detectors
Time-weighted averaging: As of 2010 a carbon monoxide detector must meet the ANSI/UL 2034-2005 standard, and it should compute the time-weighted average of the CO concentration in the air. The time-weighted average measurement process constantly monitors all CO levels, eliminating most false alarms.
Multi-channel monitoring: This function allows detectors to sniff for fumes in different cabins. For example, the CO Sentinel CMD-4MR-RLY (Model 6818900) allows up to six detectors to be linked in series. When one detector’s alarm activates, all connected detectors will alarm to alert boat inhabitants in other locations to the presence of CO.
Sensitivity: CO alarms will sound when they measure 70 particles of carbon monoxide per one million particles of air (PPM), well before the first symptoms of overexposure set in.
Sensor mounting position: Install carbon monoxide detectors or remote sensors at or near eye level in each cabin but NOT near a hatch or porthole where water could come in contact with the device.