|
What they do
Rail fittings let you build rigid bow, stern and cabintop handrail and lifeline systems, dodgers, and other canvas/tubing assemblies, providing secure handholds and/or rigid barriers around your boat’s perimeter. Made in a variety of shapes and angles, these components can accommodate the many configurations possible on a boat. They are available in two diameters: 7/8" dia., generally used on smaller powerboats, and 1" dia., used on sailboats and larger powerboats.
- Rail bases connect the tubing to the deck of a boat. They are available in many angles, from 30° to 90°. They are available with round or rectangular bases.
- Tees are like plumbing tees, and form a three-way connection between tubes.
- Bow forms connect two tubes at about a 135° angle.
- Universal tees are like normal tees except the third leg intersects at a 60° angle.
- Elbows are 90° intersections.
Material choices
Rail fittings are made from two materials: zamak (a zinc-aluminum alloy) and stainless steel. Zamak fittings have a highly polished look when new, but only a modest amount of corrosion resistance when subjected to saltwater, so we recommend them for fresh water environments only. Stainless steel fittings are stronger and have outstanding corrosion resistance, at a premium price. Match materials between system components to minimize the effects of galvanic corrosion between dissimilar metals.
- Rail tubing comes in 7/8" or 1" diameters, and is made from 304 stainless or aluminum. It is sold in stock lengths of 6', 12', or 20'.
- Aluminum tubing with Chrome Zamak fittings are used for fresh water applications only.
- Stainless steel tubing with stainless steel fittings can be used for both fresh water and salt water applications.
- Stainless steel fittings used with aluminum tubing will cause corrosion. You should never use this combination.
- .065" wall thickness is recommended when bending tubing. Special Order S14-7865P20-1 (7/8" diameter x 20' length or S14-1065P20-1 (1" diameter x 20' length).
Installation tips for the DIY boat owner
Most rail fittings attach to the deck with either #10 flat head machine screws (for 7/8" diameter rail components) or 1/4-20 FHMS (for 1" diameter rail parts), which should be through-bolted for greatest strength and safety, using substantial backing plates. While it is tempting and convenient to use sheet metal screws, machine screws with locking nuts will be far stronger. Seal the fasteners with silicone, polyurethane, or polysulfide caulking to prevent leaks and water damage to the hull material. Apply plenty of sealant around the fastener holes, especially on the shanks of the fasteners. Rail fittings attach to the rail tubing with Allen head set screws, so they can be owner-installed, and taken apart if needed. A small dab of Loctite on the setscrews will ensure that your railing stays together for many seasons.
Tools and Supplies Needed
- Screwdriver or Reversible drill
- Goggles
- Allen wrench
- Spray lubricant
- Hacksaw (for cutting aluminum tube)
- Band Saw with S.S. blade or cut-off wheel (for cutting S.S.)
- Metal file
- Silicone sealant or 3M 5200
- Stainless steel screws
- Loc-Tite™
Preparation
- Remove the damaged fittings & tube sections using a screwdriver or drill, allen wrench and spray lubricant
- Measure the fittings & tube you removed and determine which part is best for your replacement
- Prepare the surface of the boat by cleaning the gelcoat thoroughly and filling all holes with silicone sealant or 3M 5200
- Measure the length of the tube sections to be replaced and cut the tube to the appropriate lengths. File the edges smooth with a metal file
- If you're replacing a bend in your tube, it is recommended you take your broken tube along with the new tube and fittings to a local Marine Bimini Top Professional, Electrician or Plumber. They have the bending equipment to ensure the right bend for you. Bends must be made with the fittings in place.
Installation
- Place the bent tube, such as bow rails with fittings attached in position, along with the tubing it attaches to.
- Attach all additional slide-on fittings onto the tube and secure with the provided set screws. You may need to refer back to set screw punctures on the old tube to determine where the new fittings should be located, especially if the tube is new
- Secure any fittings to be attached to the deck using stainless steel screws and a screwdriver or drill
Care and Maintenance
- Wash with soap & water and avoid harsh chemicals, especially bleach
- Apply a polish coating regularly for added protection and beauty
- Never use course abrasives like sandpaper or steel wool
- Remove stain spots as soon as possible with a brass, silver or chrome cleaner
TIP:
Polish your tube & fittings before you install them for added corrosion protection. Water can collect between the tube and fittings and hold in moisture, salt & other residue.
TIP:
Apply silicone sealant or 3M 5200 to the screw threads when you're securing fittings to the deck of the boat. This will help seal the holes. Once all the tubing and fittings have been installed, back out the set screws and apply Loc-Tite to all set screws and re-tighten to prevent them from loosening in rough waters.
|
