Awl-Quik Sanding Surfacer Primer & Converters (Professional Application Only)

Sand and fill your way to a smooth finish with Awlquick Epoxy Primer/Surfacer.

Awlquick Epoxy Primer/surface is a fast-drying, medium build, easily sanded, two-component epoxy primer-surfacer. Awl-Quik acts as a two component epoxy primer for use where high build and filling is required. Easy to apply by brush, roller or spray. Not to be used below the waterline.

Key Features

• Easily sanded primer 
• Use where high build and filling is required 
• Best when used over other Awlgrip primers 
• Use as a fairing compound 

Physical Data

• Type: Epoxy Polyamide
• Formulation: Sanding surfacer
• Components: 2 (Base and Converter) 
• VOC:  Base D8003: 436 g/l ; Converter D9001: 354 g/l

Application

• Recommended Application Method: Conventional or airless spray, brush or roller
• Number of coats recommended: 2-3 
• Induction Time after Mixing: 15 Minutes
• Pot Life: @ 77°F, 50% RH: 8 hrs.
• Recommended Wet Film Thickness: 5 mils
• Recommended Dry Film Thickness: 2-3 mils
• Application Temperature: Minimum 13°C (55°F); Maximum: 41°C (105°F).
• Primer Needed:  545 Primer 
• Coverage:  609sq.ft./Gallon
• Converter:  AwlGrip (D9001)
• Cleaner: T0006, T0002, or T0031 Reducers

More information

For detailed application instructions and to view available colors, see the Awlquik Epoxy Primer-Surfacer Data Sheet. NOTE: Manufacturer data sheets are subject to revision. Linked data sheets are believed to be accurate at the time of publication.