Pro Series AC Adaptor
PLUS Plan includes:
- Wear and Tear Coverage
- Power Surge Protection
- Exchange for products under $400
- Onboard service on products over $750
- Up to 5 years of total coverage
PLUS plan goes into effect with purchase; no registration required. Purchase online, in stores or call 1 (800) 262-8464.
DURABRITE Pro Series AC Adaptor
AC to DC LED driver featuring dual mode constant voltage and constant current output. DC voltage is 24v, the constant current region is 12 - 24v, the rated current is 20A, the rated power is 480W. Thanks to the high efficiency up to 95.5%, with the fanless design, the entire series is able to operate for -40℃ ~ +90℃ case temperature under free air convection.
The design of metal housing and IP67 ingress protection level allows this series to fit both indoor and outdoor applications.
Warning:
If you are using this AC/DC converter (aka power supply), you must install a switch on the DC side of the power supply. In other words, you will need a switch to be installed between the light and the power supply. The light switch must be turned on, only after the power supply is already powered. This will prevent a pass-thru surge induced damage that could take place in some electric systems.
If it happens, you will find that the light will only take a low voltage (e.g. 4.5V) instead of 24V and the driver board inside the light has already been damaged. This damage will not be covered by warranty as of August 1st, 2020.
Features:
- AC to DC conversion
- Rated IP67, suitable for indoor and outdoor application
- Operates for -40℃ ~ +90℃ case temperature under free air convection
- Metal housing
- Fanless design
